Enantioselective total syntheses of manzamine a and related alkaloids

As a prelude to undertaking the total syntheses of the complex manzamine alkaloids, a series of model studies were conducted to establish the scope and limitations of intramolecular [4 + 2] cycloadditions of N-acylated vinylogous ureas with the trienic substrates 17a,b, 28a,b, and 34. These experiments clearly demonstrated that the geometry of the internal double bond and the presence of an electron-withdrawing group on the diene moiety were essential for the facile and stereoselective formation of the desired cycloadducts. The enantioselective syntheses of the manzamine alkaloids ircinol A (75), ircinal A (5), and manzamine A (1) were then completed by employing a convergent strategy that featured a novel domino Stille/Diels-Alder reaction to construct the tricyclic ABC ring core embodied in these alkaloids. Thus, the readily accessible chiral dihydropyrrole 58 was first converted in a single chemical operation into the key tricyclic intermediate 60. Two ring-closing metathesis reactions were then used to form the 13- and 8-membered rings leading to Z-72 and 74, the latter of which was quickly elaborated into ircinal A (5) via ircinol A (75). The synthetic 5 thus obtained was converted into manzamine A (1) following literature precedent. This concise synthesis of ircinal A required a total of 24 operations from commercially available starting materials with the longest linear sequence being 21 steps.     

A Self-Assembled Cage with Endohedral Acid Groups both Catalyzes Substitution Reactions and Controls Their Molecularity

A self-assembled Fe₄L₆ cage complex internally decorated with acid functions is capable of accelerating the thioetherification of activated alcohols, ethers and amines by up to 1000-fold. No product inhibition is seen, and effective supramolecular catalysis can occur with as little as 5 % cage. The substrates are bound in the host with up to micromolar affinities, whereas the products show binding that is an order of magnitude weaker. Most importantly, the cage host alters the molecularity of the reaction: whereas the reaction catalyzed by simple acids is a unimolecular, S_N1-type substitution process, the rate of the host-mediated process is dependent on the concentration of nucleophile. The molecularity of the cage-catalyzed reaction is substrate-dependent, and can be up to bimolecular. In addition, the catalysis can be prevented by a large excess of nucleophile, where substrate inhibition dominates, and the use of tritylated anilines as substrates causes a negative feedback loop, whereby the liberated product destroys the catalyst and stops the reaction.     

Novel materials for bioanalytical and biomedical applications: Environmental response and binding/release capabilities of amphiphilic hydrogels with shape‐persistent dendritic junctions

The binding and release capabilities of a hydrogel series, constructed of hydrophilic poly(ethylene glycol) segments and hydrophobic dendritic junctions [poly (benzyl ether)s], are evaluated in aqueous media. The environmental response of the amphiphilic networks is also tested in water at three pH values: 1.5, 7.0, and 10.1. The highest swelling ratio is observed under acidic conditions and varies between 3.7 and 6.5, depending on the crosslinking density and dendrimer generation. Gel specimens with embedded indicators react within 3–6 s with a clear color switch to the change in the pH of the surrounding medium. The experiments with model anionic and cationic indicators and stains show that the hydrogels have basic interiors. The gel binding capabilities depend on the water solubility of the substrate and on the size of the incorporated dendritic fragments. Model release studies have been performed at 37 °C and pHs 1.5, 7.0, and 10.1. The observed phenomena are explained by the transformations in the structure and charge that both the networks and the model compounds undergo with the changes in the pH of the aqueous medium. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4017–4029, 2005     

Syngas production by biogas reforming over the Co-based multicomponent catalysts

The new multicomponent Co-based catalysts with additives of group 8 metal and rare earth elements and supported on alumina have been tested in the dry and steam conversion of a model biogas. The processes were carried out in a flow quartz reactor under the following conditions: atmospheric pressure, a gas hourly space velocity of 1000 h^?1 and temperatures of 300–800°C. The catalysts were characterised using electron microscopy, BET and X-ray analysis. The methane is almost completely converted in the dry reforming of biogas at T≤800°C. Synthesis gas with a ratio of H₂/CO>1.0 is a main product of biogas reforming over the multicomponent catalysts studied. Adding steam in a feed composition increases both the methane conversion and the hydrogen yield at lower temperatures. Almost complete methane conversion occurs at T<750°C in the steam reforming of biogas. The catalysts are highly effective and exhibit stable activity throughout 100 h of continuous testing.      

Polymicrobial Biofilm Inhibition Effects of Acetate‐Buffered Chitosan Sponge Delivery Device

Polymicrobial biofilm‐associated implant infections present a challenging clinical problem. Through modifications of lyophilized chitosan sponges, degradable drug delivery devices for antibiotic solution have been fabricated for prevention and treatment of contaminated musculoskeletal wounds. Elution of amikacin, vancomycin, or a combination of both follows a burst release pattern with vancomycin released above minimum inhibitory concentration for Staphylococcus aureus for 72 h and amikacin released above inhibitory concentrations for Pseudomonas aeruginosa for 3 h. Delivery of a vancomycin, amikacin, or a combination of both reduces biofilm formation on polytetrafluoroethylene catheters in an in vivo model of contamination. Release of dual antibiotics from sponges is more effective at preventing biofilm formation than single‐loaded chitosan sponges. Treatment of pre‐formed biofilm with high‐dose antibiotic release from chitosan sponges shows minimal reduction after 48 h. These results demonstrate infection‐preventive efficacy for antibiotic‐loaded sponges, as well as the need for modifications in the development of advanced materials to enhance treatment efficacy in removing established biofilm.

     

Inhibitors of plasmin that extend into both the S and S' binding sites: cooperative interactions between S1 and S2

A new procedure for the synthesis of cyclohexanone-based inhibitors of serine proteases is reported. In this procedure the reactive ketone functionality is carried through the synthesis in masked form as a TBDMS-protected alcohol. Deprotection followed by oxidation of the alcohol generates the final form of the inhibitor. Two new inhibitors, which interact with the S1-S3 and S2' subsites of plasmin, are synthesized using this procedure. Inhibitors 1 and 2 have IC50 values against plasmin of 20 and 24 microM, respectively. The inhibition studies show that cooperative binding of inhibitors in the S1 and S2 subsites of plasmin is important for determining inhibitor selectivity.     

Optically sectioned fluorescence lifetime imaging using a Nipkow disk microscope and a tunable ultrafast continuum excitation source

We demonstrate an optically sectioned fluorescence lifetime imaging microscope with a wide-field detector, using a convenient, continuously tunable (435-1150 nm) ultrafast source for fluorescence imaging applications that is derived from a visible supercontinuum generated in a microstructured fiber.     

Solid energy calibration standards for P K‐edge XANES: electronic structure analysis of PPh4Br

P K‐edge X‐ray absorption near‐edge structure (XANES) spectroscopy is a powerful method for analyzing the electronic structure of organic and inorganic phosphorus compounds. Like all XANES experiments, P K‐edge XANES requires well defined and readily accessible calibration standards for energy referencing so that spectra collected at different beamlines or under different conditions can be compared. This is especially true for ligand K‐edge X‐ray absorption spectroscopy, which has well established energy calibration standards for Cl (Cs₂CuCl₄) and S (Na₂S₂O₃·5H₂O), but not neighboring P. This paper presents a review of common P K‐edge XANES energy calibration standards and analysis of PPh₄Br as a potential alternative. The P K‐edge XANES region of commercially available PPh₄Br revealed a single, highly resolved pre‐edge feature with a maximum at 2146.96 eV. PPh₄Br also showed no evidence of photodecomposition when repeatedly scanned over the course of several days. In contrast, we found that PPh₃ rapidly decomposes under identical conditions. Density functional theory calculations performed on PPh₃ and PPh₄⁺ revealed large differences in the molecular orbital energies that were ascribed to differences in the phosphorus oxidation state (III versus V) and molecular charge (neutral versus +1). Time‐dependent density functional theory calculations corroborated the experimental data and allowed the spectral features to be assigned. The first pre‐edge feature in the P K‐edge XANES spectrum of PPh₄Br was assigned to P 1s → P‐C π* transitions, whereas those at higher energy were P 1s → P‐C σ*. Overall, the analysis suggests that PPh₄Br is an excellent alternative to other solid energy calibration standards commonly used in P K‐edge XANES experiments.     

Investigation of Lewis Acid versus Lewis Base Catalysis in Asymmetric Cyanohydrin Synthesis

The asymmetric addition of trimethylsilyl cyanide to aldehydes can be catalysed by Lewis acids and/or Lewis bases, which activate the aldehyde and trimethylsilyl cyanide, respectively. It is not always apparent from the structure of the catalyst whether Lewis acid or Lewis base catalysis predominates. To investigate this in the context of using salen complexes of titanium, vanadium and aluminium as catalysts, a Hammett analysis of asymmetric cyanohydrin synthesis was undertaken. When Lewis acid catalysis is dominant, a significantly positive reaction constant is observed, whereas reactions dominated by Lewis base catalysis give much smaller reaction constants. [{Ti(salen)O}₂] was found to show the highest degree of Lewis acid catalysis, whereas two [VO(salen)X] (X=EtOSO₃ or NCS) complexes both displayed lower degrees of Lewis acid catalysis. In the case of reactions catalysed by [{Al(salen)}₂O] and triphenylphosphine oxide, a non‐linear Hammett plot was observed, which is indicative of a change in mechanism with increasing Lewis base catalysis as the carbonyl compound becomes more electron‐deficient. These results suggested that the aluminium complex/triphenylphosphine oxide catalyst system should also catalyse the asymmetric addition of trimethylsilyl cyanide to ketones and this was found to be the case.