Photophysics of Azobenzene Constrained in a UiO Metal–Organic Framework: Effects of Pressure,Solvation and Dynamic Disorder

Photophysical studies of chromophoric linkers in metal–organic frameworks (MOFs) are undertaken commonly in the context of sensing applications, in search of readily observable changes of optical properties in response to external stimuli. The advantages of the MOF construct as a platform for investigating fundamental photophysical behaviour have been somewhat overlooked. The linker framework offers a unique environment in which the chromophore is geometrically constrained and its structure can be determined crystallographically, but it exists in spatial isolation, unperturbed by inter-chromophore interactions. Furthermore, high-pressure studies enable the photophysical consequences of controlled, incremental changes in local environment or conformation to be observed and correlated with structural data. This approach is demonstrated in the present study of the trans-azobenzene chromophore, constrained in the form of the 4,4’-azobenzenedicarboxylate (abdc) linker, in a UiO topology framework. Previously unobserved effects of pressure-induced solvation and conformational distortion on the lowest energy, nπ* transition are reported, and interpreted the light of crystallographic data. It was found that trans-azobenzene remains non-fluorescent (with a quantum yield less than 10⁻⁴) despite the prevention of trans-cis isomerization by the constraining MOF structure. We propose that efficient non-radiative decay is mediated by the local, pedal-like twisting of the azo group that is evident as dynamic disorder in the crystal structure.     

Dispersion of polymeric-coated–silica aerogel particles in unsaturated polyester composites: Effects on thermal-mechanical properties

The thermal-mechanical properties of unsaturated polyester (UP) composite were enhanced by the dispersion of silica aerogel (SA) with preserved pores. Low-cost SA was prepared from rice husk via the sol-gel process and ambient pressure drying. A new method was proposed to encapsulate the hydrophobic aerogel surface pores with hydrophilic polyvinyl alcohol (PVA) film using the fluidized-bed coating process. The dispersion of PVA-coated aerogel with preserved pores in the polyester matrix resulted in an increase of specific compressive strength (44.1?MPa?·?cm³?g^?1), thermal insulation (0.23?W?m^?1?K^?1), and thermal stability (T_onset?=?310°C), but decreased the glass transition temperature (T_g?=?260°C).     

Photochemistry and environment XII: Phototransformation of 3-nitrophenol in aqueous solution

The quantum yield φ of phototransformation of 3-nitrophenol is very low, but a strong wavelength effect is observed. At pH 2.2 in degassed solution φ_{254 nm} = 7.3 × 10⁻⁵ and φ_{365 nm} = 4.5 × 10⁻⁶. The effect of dissolved oxygen on the photoreactions remains limited. Seven organic photoproducts were identified: resorcinol, 4-nitrosoresorcinol, 2,4-dinitrosoresorcinol, 3-nitrocatechol, 4-nitrocatechol, nitrohydroquinone and 2,3′-dihydroxy-4-nitrobiphenyl. From the inhibiting effect of ethanol it can be concluded that resorcinol is mainly formed through a primary heterolytic photohydrolysis of 3-nitrophenol. The formation of nitrosoresorcinol and the nitrodiphenols can be attributed to the reactions of hydroxyl radicals formed by nitrite (or nitrate) ion excitation.     

Correlating Pressure-Induced Emission Modulation with Linker Rotation in a Photoluminescent MOF

Conformational changes of linker units in metal-organic frameworks (MOFs) are often responsible for gate-opening phenomena in selective gas adsorption and stimuli-responsive optical and electrical sensing behaviour. Herein, we show that pressure-induced bathochromic shifts in both fluorescence emission and UV/Vis absorption spectra of a two-fold interpenetrated Hf MOF, linked by 1,4-phenylene-bis(4-ethynylbenzoate) ligands ( Hf-peb ), are induced by rotation of the central phenyl ring of the linker, from a coplanar arrangement to a twisted, previously unseen conformer. Single-crystal X-ray diffraction, alongside in situ fluorescence and UV/Vis absorption spectroscopies, measured up to 2.1 GPa in a diamond anvil cell on single crystals, are in excellent agreement, correlating linker rotation with modulation of emission. Topologically isolating the 1,4-phenylene-bis(4-ethynylbenzoate) units within a MOF facilitates concurrent structural and spectroscopic studies in the absence of intermolecular perturbation, allowing characterisation of the luminescence properties of a high-energy, twisted conformation of the previously well-studied chromophore. We expect the unique environment provided by network solids, and the capability of combining crystallographic and spectroscopic analysis, will greatly enhance understanding of luminescent molecules and lead to the development of novel sensors and adsorbents.     

Correlating Pressure‐Induced Emission Modulation with Linker Rotation in a Photoluminescent MOF

Conformational changes of linker units in metal‐organic frameworks (MOFs) are often responsible for gate‐opening phenomena in selective gas adsorption and stimuli‐responsive optical and electrical sensing behaviour. Herein, we show that pressure‐induced bathochromic shifts in both fluorescence emission and UV/Vis absorption spectra of a two‐fold interpenetrated Hf MOF, linked by 1,4‐phenylene‐bis(4‐ethynylbenzoate) ligands ( Hf‐peb ), are induced by rotation of the central phenyl ring of the linker, from a coplanar arrangement to a twisted, previously unseen conformer. Single‐crystal X‐ray diffraction, alongside in situ fluorescence and UV/Vis absorption spectroscopies, measured up to 2.1 GPa in a diamond anvil cell on single crystals, are in excellent agreement, correlating linker rotation with modulation of emission. Topologically isolating the 1,4‐phenylene‐bis(4‐ethynylbenzoate) units within a MOF facilitates concurrent structural and spectroscopic studies in the absence of intermolecular perturbation, allowing characterisation of the luminescence properties of a high‐energy, twisted conformation of the previously well‐studied chromophore. We expect the unique environment provided by network solids, and the capability of combining crystallographic and spectroscopic analysis, will greatly enhance understanding of luminescent molecules and lead to the development of novel sensors and adsorbents.     

Effects of Rice Husk Derived Amorphous Silica on the Thermal-Mechanical Properties of Unsaturated Polyester Composites

Rice husk is rich in amorphous silica which has found various applications as a filler in rubbers and plastics. In the research described here silica was extracted from rice husk ash in the form of sodium silicate which was used to produced amorphous precipitated silica (PS) and silica aerogel (SA) using a sol – gel process and supercritical drying. These materials were then physically mixed with unsaturated polyester (UP) resin and cured at room temperature to form polymer composites. The experimental results showed that the UP composites with 30% (volume percent) of SA filler had lower density and better thermal insulation than the composites with the same amount of PS. Thermogravimetric analysis (TGA) results showed that the T_onset of the PS and SA composites were slightly delayed by 15 and 10°C, respectively. The tensile stress-strain curves showed that addition of the fillers reduced the tensile strength, but increased the elastic moduli of the UP matrix. PS filled UP composites exhibit higher moduli (higher stiffness) than that of SA filled UP composites. This was due to agglomeration and poor adhesion of the SA particles to the UP matrix while better dispersion was observed for the PS filled composite.     

Identification of Dipeptidyl Peptidase-4 and α-Amylase Inhibitors from Melicope glabra (Blume) T. G. Hartley (Rutaceae) Using Liquid Chromatography Tandem Mass Spectrometry,In Vitro and In Silico Methods

The present study investigated the antidiabetic properties of the extracts and fractions from leaves and stem bark of M. glabra based on dipeptidyl peptidase-4 (DPP-4) and α-Amylase inhibitory activity assays. The chloroform extract of the leaves was found to be most active towards inhibition of DPP-4 and α-Amylase with IC₅₀ of 169.40 μg/mL and 303.64 μg/mL, respectively. Bioassay-guided fractionation of the leaves’ chloroform extract revealed fraction 4 (CF4) as the most active fraction (DPP-4 IC₅₀: 128.35 μg/mL; α-Amylase IC₅₀: 170.19 μg/mL). LC-MS/MS investigation of CF4 led to the identification of trans-decursidinol (1), swermirin (2), methyl 3,4,5-trimethoxycinnamate (3), renifolin (4), 4′,5,6,7-tetramethoxy-flavone (5), isorhamnetin (6), quercetagetin-3,4′-dimethyl ether (7), 5,3′,4′-trihydroxy-6,7-dimethoxy-flavone (8), and 2-methoxy-5-acetoxy-fruranogermacr-1(10)-en-6-one (9) as the major components. The computational study suggested that (8) and (7) were the most potent DPP-4 and α-Amylase inhibitors based on their lower binding affinities and extensive interactions with critical amino acid residues of the respective enzymes. The binding affinity of (8) with DPP-4 (−8.1 kcal/mol) was comparable to that of sitagliptin (−8.6 kcal/mol) while the binding affinity of (7) with α-Amylase (−8.6 kcal/mol) was better than acarbose (−6.9 kcal/mol). These findings highlight the phytochemical profile and potential antidiabetic compounds from M. glabra that may work as an alternative treatment for diabetes.     

Preliminary Insight of Pyrrolylated-Chalcones as New Anti-Methicillin-Resistant Staphylococcus aureus (Anti-MRSA) Agents

Bacterial infections are regarded as one of the leading causes of fatal morbidity and death in patients infected with diseases. The ability of microorganisms, particularly methicillin-resistant Staphylococcus aureus (MRSA), to develop resistance to current drugs has evoked the need for a continuous search for new drugs with better efficacies. Hence, a series of non-PAINS associated pyrrolylated-chalcones (1–15) were synthesized and evaluated for their potency against MRSA. The hydroxyl-containing compounds (8, 9, and 10) showed the most significant anti-MRSA efficiency, with the MIC and MBC values ranging from 0.08 to 0.70 mg/mL and 0.16 to 1.88 mg/mL, respectively. The time-kill curve and SEM analyses exhibited bacterial cell death within four hours after exposure to 9, suggesting its bactericidal properties. Furthermore, the docking simulation between 9 and penicillin-binding protein 2a (PBP2a, PDB ID: 6Q9N) suggests a relatively similar bonding interaction to the standard drug with a binding affinity score of −7.0 kcal/mol. Moreover, the zebrafish model showed no toxic effects in the normal embryonic development, blood vessel formation, and apoptosis when exposed to up to 40 µM of compound 9. The overall results suggest that the pyrrolylated-chalcones may be considered as a potential inhibitor in the design of new anti-MRSA agents.     

On-line mass spectrometric analysis of hydrothermal reactions for biomass model sample containing sulfur compounds

Biomass gasification using supercritical water is a promising way to produce hydrogen gas. However, this method might release toxic heteroatomic compounds. It is therefore important to clarify reaction pathways for efficiently obtaining hydrogen gas and suppressing environmental burden. L-cysteine was adopted for a test reagent containing sulfur and determination of the sulfur compound reaction pathways was studied by Li⁺-ion attachment mass spectrometry. It was found that H₂S, CO, CO₂, SO, SO₂ and SO₃ gasses were released at high concentrations in the gas phase during the hydrothermal reaction. By adding Ca(OH)₂ as alkali, the pathway of these gasses were, however, suppressed into the liquid phase so that the toxic emissions to the gas phase could be avoided.