A new method to study antioxidant capability: hydrogen transfer from phenols to a prefluorescent nitroxide

[reaction: see text]. Rate constants for hydrogen abstraction from phenols by a prefluorescent-TEMPO probe are reported. The nitroxide is employed as a potential model of peroxyl radicals. The probe works by nitroxide suppression of the fluorescence of the chromophore. The fluorescence is restored when the nitroxide abstracts a hydrogen atom to produce the diamagnetic hydroxylamine. The phenols studied in this project exhibited rate constants between 0.003 and 0.2 M(-1) s(-1). A deuterium isotope effect of 10 for TROLOX confirms that the mechanism is dominated by hydrogen transfer.     

Kinetics and mechanism of the aminolysis of O-aryl S-methyl thiocarbonates

[reaction: see text] The reactions of secondary alicyclic (SA) amines and quinuclidines (QUI) with 4-nitrophenyl and 2,4-dinitrophenyl S-methyl thiocarbonates (1 and 2, respectively) and those of SA amines with 2,3,4,5,6-pentafluorophenyl S-methyl thiocarbonate (3) are subjected to a kinetic study in aqueous solution, at 25.0 degrees C, and an ionic strength of 0.2 M (KCl). The reactions of thiocarbonates 1, 2, and 3 were followed spectrophotometrically at 400, 360, and 220 nm, respectively. Under amine excess, pseudo-first-order rate coefficients (k(obsd)) are found. Plots of k(obsd) vs amine concentration at constant pH are linear, with the slope (kN) independent of pH. The Br?nsted-type plots (log kN vs pKa of aminium ions) are linear for all the reactions, with slopes beta = 0.9 for those of 1 with SA amines and QUI, beta = 0.36 and 0.57 for the reactions of 2 with SA amines and QUI, respectively, and beta = 0.39 for the reactions of SA amines with 3. The magnitude of the slopes indicates that both aminolyses of 1 are governed by stepwise mechanisms, through a zwitterionic tetrahedral intermediate (T+/-), where expulsion of the nucleofuge from T+/- is the rate-determining step. The values of the Br?nsted slopes found for the aminolyses of thiocarbonates 2 and 3 suggest that these reactions are concerted. By comparison of the reactions under investigation between them and with similar aminolyses, the following conclusions arise: (i) Thiocarbonate 2 is more reactive than 1 toward the two amine series. (ii) The change of the nonleaving group from MeO in 4-nitrophenyl methyl carbonate to MeS in thiocarbonate 1 results in lower kN values. (iii) The greater reactivity of this carbonate than thiocarbonate 1 is attributed to steric hindrance of the MeS group, compared to MeO toward amine attack. (iv) The change of a pyridine to an isobasic SA amine or QUI destabilizes the T+/- intermediate formed in the aminolyses of 2. (v) The change of 4-nitrophenoxy to 2,3,4,5,6-pentafluorphenoxy or 2,4-dinitrophenoxy as the leaving group destabilizes the tetrahedral intermediate formed in the reactions with SA amines, changing the mechanism from a stepwise process to a concerted reaction.     

Bond dissociation energies for radical dimers derived from highly stabilized carbon-centered radicals

[reaction: see text] The temperature dependence of the dissociation of dimers formed from highly stabilized carbon-centered radicals has been examined. Analysis of the data yields the bond dissociation energy (BDE) for the central head-to-head C-C bond in these compounds. For example, for the dimer derived from 3-phenyl-2-coumaranone, BDE is 23.6 kcal/mol and the C-C bond length 1.596 A, a rather long value for a sigma bond.     

Hydroxyl Radical Generation and DNA Nuclease Activity: A Mechanistic Study Based on a Surface‐Immobilized Copper Thioether Clip‐Phen Derivative

Coordination compounds of copper have been invoked as major actors in processes involving the reduction of molecular oxygen, mostly with the generation of radical species the assignment for which has, so far, not been fully addressed. In the present work, we have carried out studies in solution and on surfaces to gain insights into the nature of the radical oxygen species (ROS) generated by a copper(II) coordination compound containing a thioether clip‐phen derivative, 1,3‐bis(1,10‐phenanthrolin‐2‐yloxy)‐N‐(4‐(methylthio)benzylidene)propan‐2‐amine (2CP‐Bz‐SMe), enabling its adsorption/immobilization to gold surfaces. Whereas surface plasmon resonance (SPR) and electrochemistry of the adsorbed complex indicated the formation of a dimeric Cu^I intermediate containing molecular oxygen as a bridging ligand, scanning electrochemical microscopy (SECM) and nuclease assays pointed to the generation of a ROS species. Electron paramagnetic resonance (EPR) data reinforced such conclusions, indicating that radical production was dependent on the amount of oxygen and H₂O₂, thus pointing to a mechanism involving a Fenton‐like reaction that results in the production of OH^..     

Imaging the Magnetic Reversal of Isolated and Organized Molecular‐Based Nanoparticles using Magnetic Force Microscopy

In the race towards miniaturization in nanoelectronics, magnetic nanoparticles (MNPs) have emerged as potential candidates for their integration in ultrahigh‐density recording media. Molecular‐based materials open the possibility to design new tailor‐made MNPs with variable composition and sizes, which benefit from the intrinsic properties of these materials. Before their implementation in real devices is reached, a precise organization on surfaces and a reliable characterization and manipulation of their individual magnetic behavior are required. In this paper, it is demonstrated how molecular‐based MNPs are accurately organized on surfaces and how the magnetic properties of the individual MNPs are detected and tuned by means of low‐temperature magnetic force microscopy (LT‐MFM) with variable magnetic field. The magnetization reversal on isolated and organized MNPs is investigated; in addition, the temperature dependence of their magnetic response is evaluated.     

Multiscale Approach to the Study of the Electronic Properties of Two Thiophene Curcuminoid Molecules

We studied the electronic and conductance properties of two thiophene–curcuminoid molecules, 2‐thphCCM ( 1 ) and 3‐thphCCM ( 2 ), in which the only structural difference is the position of the sulfur atoms in the thiophene terminal groups. We used electrochemical techniques as well as UV/Vis absorption studies to obtain the values of the HOMO–LUMO band gap energies, showing that molecule 1 has lower values than 2 . Theoretical calculations show the same trend. Self‐assembled monolayers (SAMs) of these molecules were studied by using electrochemistry, showing that the interaction with gold reduces drastically the HOMO–LUMO gap in both molecules to almost the same value. Single‐molecule conductance measurements show that molecule 2 has two different conductance values, whereas molecule 1 exhibits only one. Based on theoretical calculations, we conclude that the lowest conductance value, similar in both molecules, corresponds to a van der Waals interaction between the thiophene ring and the electrodes. The one order of magnitude higher conductance value for molecule 2 corresponds to a coordinate (dative covalent) interaction between the sulfur atoms and the gold electrodes.     

EPR Studies of Tl0.5Pb0.5Sr1.6Ba0.4CaCu2?xRuxO7?δ Superconductor

Bulk superconducting samples of type Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ, (Tl, Pb)/Sr-1212, with 0.0 ≤ x ≤ 0.525 were prepared by the conventional one-step solid-state reaction technique. The prepared samples were investigated using X-ray powder diffraction, electrical resistivity and electron paramagnetic resonance (EPR) measurements. Enhancement of the phase formation, superconducting transition temperature T _c and hole carriers concentration P was observed up to x = 0.075. For x > 0.075, a reverse trend was observed. EPR spectra were measured at different temperatures (120–290 K) for all prepared samples. The number of spins N participating in the resonance and the paramagnetic susceptibility χ were calculated as a function of both Ru-content and temperature. N and χ increased as the Ru-content increased. A linear relationship between logN and 1/T was established, from which the activation energy E _a was calculated as a function of the Ru-content. The temperature dependence of χ was fitted according to Curie–Weiss type of magnetic behavior. Curie constant C, Curie temperature θ, the effective magnetic moment μ and the electronic specific heat γ were estimated as a function of the Ru-content.     

Surface‐enhanced Raman scattering and density functional theory studies of bis(4‐aminophenyl)sulfone

Raman and surface‐enhanced Raman scattering (SERS) spectra of dapsone by using colloidal silver nanoparticles have been recorded. Density functional theory was used for the optimization of ground state geometries and simulation of the vibrational spectrum of this molecule. The SERS spectrum with a large silver cluster as a model metallic surface was simulated for the first time. Taking into account the experimental and calculated Raman as well as the SERS normal modes and the corresponding assignments, along with the modeling of the free dapsone and the one in the presence of the colloidal silver nanoparticles, the importance of the sulfone group on the SERS effect in dapsone was inferred. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of IR laser radiation on the structure and optical properties of PC-PBT/Pd polymer nanocomposite films

ABSTRACT

Bayfol (PC-PBT blend ?lm) is a class of polymeric solid-state nuclear track detector which has a lot of applications in several radiation detection ?elds. It is a bisphenol-A polycarbonate PC blended with polybutylene terephthalate PBT. Bayfol/Palladium (PC-PBT/Pd) nanocomposite films have been deposited using the molding technique. It is worth mentioning that this report is almost the first one dealing with the topic of the changes of physical properties of Bayfol/Pd nanocomposite due to laser exposure. Samples from PC-PBT/Pd (5?wt%) nanocomposite were exposed to IR-pulsed laser of 5-W power, capable of producing 2000 pulses per second with pulse duration of 200?ns at 904?nm. The laser fluences were in the range 2–25?J/cm². The resultant modi?cations in the exposed nanocomposite samples have been studied as a function of fluence using different characterization techniques such as X-ray diffraction (XRD), UV spectroscopy and color difference studies. The results indicate the proper dispersion of Pd nanoparticles in the PC-PBT matrix that causes a strong intermolecular interaction between Pd and PC-PBT, resulted in an increase in refractive index and the amorphous phase. Also, it is found that the laser exposure reduces the optical energy gap that could be attributed to the increase in structural disorder of the exposed PC-PBT/Pd nanocomposites due to crosslinking. Further, the color intensity ΔE, which is the color difference between the exposed samples and the non-exposed one, was increased with increasing the laser fluence, convoyed by a significant increase in the green and yellow color components.