Long-wavelength Ultraviolet A1 and Visible Light Photoprotection: A Multimodality Assessment of Dose and Response

Human skin is exposed to visible light (VL; 400–700 nm) and long-wavelength ultraviolet A1 (UVA1) radiation (370–400 nm) after the application of organic broad-spectrum sunscreens. The biologic effects of these wavelengths have been demonstrated; however, a dose–response has not been investigated. Ten subjects with Fitzpatrick skin phototype IV-VI were enrolled. Subjects were irradiated with 2 light sources (80–480 J cm⁻²): one comprising VL with less than 0.5% UVA1 (VL+UVA1) and the other pure VL. Skin responses were evaluated for 2 weeks using clinical and spectroscopic assessments. 4-mm punch biopsies were obtained from nonirradiated skin and sites irradiated with 480 J cm⁻² of VL+UVA1 and pure VL 24 h after irradiation. Clinical and spectroscopic assessments demonstrated a robust response at VL+UVA1 sites compared with pure VL. Histology findings demonstrated a statistically significant increase in the marker of inflammation (P < 0.05) and proliferation (P < 0.05) at the irradiated sites compared with nonirradiated control. Threshold doses of VL+UVA1 resulting in biologic responses were calculated. Results indicate that approximately 2 h of sun exposure, which equates to VL+UVA1 dose (~400 J cm⁻²), is capable of inducing inflammation, immediate erythema and delayed tanning. These findings reinforce the need of photoprotection beyond the UV range.     

One-pot synthesis of polysubstituted indoles from aliphatic nitro compounds under mild conditions

Polysubstituted indoles can be prepared directly from functionalized nitroalkanes under very mildly acidic conditions in a simple, one-pot, two-stage procedure.     

Hopf monads

We introduce and study Hopf monads on autonomous categories (i.e., monoidal categories with duals). Hopf monads generalize Hopf algebras to a non-braided (and non-linear) setting. In particular, any monoidal adjunction between autonomous categories gives rise to a Hopf monad. We extend many fundamental results of the theory of Hopf algebras (such as the decomposition of Hopf modules, the existence of integrals, Maschke's criterium of semisimplicity, etc.) to Hopf monads. We also introduce and study quasitriangular and ribbon Hopf monads (again defined in a non-braided setting).     

The unsatisfiability threshold revisited

The problem of determining the unsatisfiability threshold for random 3-SAT formulas consists in determining the clause to variable ratio that marks the experimentally observed abrupt change from almost surely satisfiable formulas to almost surely unsatisfiable. Up to now, there have been rigorously established increasingly better lower and upper bounds to the actual threshold value. In this paper, we consider the problem of bounding the threshold value from above using methods that, we believe, are of interest on their own right. More specifically, we show how the method of local maximum satisfying truth assignments can be combined with results for the occupancy problem in schemes of random allocation of balls into bins in order to achieve an upper bound for the unsatisfiability threshold less than 4.571. In order to obtain this value, we establish a bound on the q-binomial coefficients (a generalization of the binomial coefficients). No such bound was previously known, despite the extensive literature on q-binomial coefficients. Finally, to prove our result we had to establish certain relations among the conditional probabilities of an event in various probabilistic models for random formulas. It turned out that these relations were considerably harder to prove than the corresponding ones for unconditional probabilities, which were previously known.     

Rate constants from the reaction path Hamiltonian. I. Reactive flux simulations for dynamically correct rates

As ab initio electronic structure calculations become more accurate, inherent sources of error in classical transition state theory such as barrier recrossing and tunneling may become major sources of error in calculating rate constants. This paper introduces a general method for diabatically constructing the transverse eigensystem of a reaction path Hamiltonian in systems with many degenerate transverse frequencies. The diabatically constructed reaction path Hamiltonian yields smoothly varying coupling constants that, in turn, facilitate reactive flux calculations. As an example we compute the dynamically corrected rate constant for the chair to boat interconversion of cyclohexane, a system with 48 degrees of freedom and a number of degenerate frequencies. The transmission coefficients obtained from the reactive flux simulations agree with previous results that have been calculated using an empirical potential. Furthermore, the calculated rate constants agree with experimental values. Comparison to variational transition state theory shows that, despite finding the true bottleneck along the reaction pathway, variational transition state theory only accounts for half of the rate constant reduction due to recrossing trajectories.     

Ketene dithioacetal derivatives of 1-phenyl-3,5-dioxopyrazolidine. Synthesis and NMR characterization

1-Phenyl-3,5-dioxopyrazolidine 1 reacts with carbon disufide and alkyl halides in presence of excess of sodium acetate in dimethylformamide to afford the ketene dithioacetals 3a-h . The ¹³C chemical shift assignments of these compounds were made on the basis of two-dimensional nmr studies performed on the N-methylketene dithioacetal derivative 4.     

New aspects of the electroadsorption of ethyl xanthate on copper electrodes

The interaction of the ethyl xanthate (EX) anion with a copper electrode in a borate buffer solution, pH 9.2, has been investigated by cyclic voltammetry (CV), electrochemical quartz crystal microbalance (EQCM), electrochemical impedance spectroscopy (EIS), and measurements of contact angle (CA) under controlled potential. The results obtained allow establishing that, in the potential range from -0.80 and -0.60 V, two parallel reactions were characterized. These reactions were the ethyl xanthate electroadsorption and the hydrogen evolution reaction (HER). This last reaction has not been described by previous authors. Besides, the EIS measurements show that the mechanism of the HER on copper electrodes is not affected by the presence of a ethyl xanthate species. The EQCM study shows that in the electrodesorption process the departure of each ethyl xanthate species from the copper electrode is accompanied with the simultaneous entry of four to five water molecules. This fact is in accordance with the number of copper atoms involved in the adsorption of one ethyl xanthate species.     

Kinetics of adsorption of the cobalt ions on the "electrolytic solution/gamma-alumina" interface

In the present work we studied, for the first time, the kinetics of adsorption of the Co(H(2)O)(6)(2+) species on the "electrolytic solution/gamma-Al(2)O(3)" interface at pH = 7 and 25 degrees C for a very broad range of Co(II) surface concentrations ranged from 0.03 to 6 theoretical Co(H(2)O)(6)(2+) surface layers. Moreover, we studied the surface dissolution of gamma-alumina in the presence of the Co(H(2)O)(6)(2+) ions in the impregnating solution, the contribution of the Co(II) desorption on the whole deposition process and the deposition isotherm. It was found that under the conditions where the deposition has taken place, the dissolution of the gamma-alumina surface is negligible even in the presence of the Co(H(2)O)(6)(2+) species in the impregnating solution. It was, moreover, inferred that the Co(II) desorption does not participate significantly to the whole deposition process. It was found that the deposition kinetics may be described by the following kinetic expression r(Co,bulk) = k'C(Co,bulk)(2), which relates the rate of disappearance of the Co(H(2)O)(6)(2+) ions from the impregnating solution, r(Co,bulk,) with their concentration C(Co,bulk). This kinetic expression may be derived assuming the following deposition scheme: nS + 2[Co(H(2)O)(6)(2+)] --> S(n) - [Co(H(2)O)(x,x)(<)(6)(2+)](2), where S represents the surface reception sites. The above expressions indicated that two Co(H(2)O)(6)(2+) ions are involved, from the side of the interface, in the reaction with the reception sites. It seems probable that the deposition step involves the simultaneous adsorption and dimerization of the two interfacial Co(H(2)O)(6)(2+) ions through (hydr)oxobridges. On the other hand, the sigmoidal form of the deposition isotherm and the dependence of the apparent rate constant, k', on the interfacial Co(II) concentration suggested that the already deposited Co(II) species may be involved in the reception sites, S, promoting the adsorption and resulting to the formation of multinuclear complexes and Co(II) surface precipitates. Finally, reasonable interface potential values for oxides were determined for the first time using kinetic results.     

Selective spectrofluorimetric method for paracetamol determination through coumarinic compound formation

A spectrofluorimetrical selective method was designed for determination of paracetamol in tablets. This important technique can be characterized by its sensitivity, simplicity, celerity and cheaper cost than current official methods. The employed methodology involves coumarinic compound formation obtained by reaction between paracetamol and ethylacetoacetate (EAA) in the presence of sulphuric acid as catalyst. The reaction product is highly fluorescent at 478 nm, being excited at 446 nm.The linear concentration range of the application was 0.1-0.4 μg/ml of paracetamol and the detection limit was 57 ng/ml.The influence of different variables was studied and optimized through chemometric techniques. Applying the above-mentioned method good results were obtained with regard to pharmaceutical formulations containing paracetamol. Therefore, it is relevant to suggest this profitable technique for medicament control analysis.