Structural evolution of hexa-peri-hexabenzocoronene adlayers in heteroepitaxy on n-pentacontane template monolayers

The growth and structure of self-assembled adlayers of hexakis(n-dodecyl)-peri-hexabenzocoronene (HBC-C12) adsorbed on highly ordered pyrolitic graphite (HOPG) decorated by an n-pentacontane (n-C50H102) monolayer have been investigated by scanning tunneling microscopy (STM). Whereas on HOPG the HBC-C12 molecules readily self-assemble into a unique stable 2D structure, on the [n-C50H102 monolayer/graphite] system we observe morphological phase transitions with formation of time dependent alpha, beta, and gamma phases (alpha-->beta-->gamma). The initial alpha-phase is similar to that obtained on bare graphite, while intermediate beta- and final gamma-structures present molecular dimers and rows, respectively. The observed two-dimensional polymorphism is due to weak interaction between HBC-C12 molecules and n-C50H102-modified graphite substrate. Our results constitute an important step toward the control of the growth and structure of highly ordered monolayers of functional conjugated molecules by modifying the graphite surface with an n-alkane monolayer of appropriate chain length.     

Synthesis and characterization of a novel tantalum chalcogen-rich molecular cluster with square planar metal core

Black single crystals of Ta(4)Se(9)I(8) are obtained in a high yield by heating Ta, Se, and I(2) at 300 degrees C in 1:2.2:1.0 molar ratio. In the structure, the tantalum atoms form a square, with four Se(2) ligands bridging the Ta-Ta edges and one capping the square. Each Ta atom has two terminal iodine atoms. The compound is diamagnetic and has only two electrons for metal-metal bonding.     

Distribution of Platinum and Palladium between Dissolved,Nanoparticulate, and Microparticulate Fractions of Road Dust

Ageing processes of vehicle catalytic converters inevitably lead to the release of Pt and Pd into the environment, road dust being the main sink. Though Pt and Pd are contained in catalytic converters in nanoparticulate metallic form, under environmental conditions, they can be transformed into toxic dissolved species. In the present work, the distribution of Pt and Pd between dissolved, nanoparticulate, and microparticulate fractions of Moscow road dust is assessed. The total concentrations of Pt and Pd in dust vary in the ranges 9–142 ng (mean 35) and 155–456 (mean 235) ng g⁻¹, respectively. The nanoparticulate and dissolved species of Pt and Pd in dust were studied using single particle inductively coupled plasma mass spectrometry. The median sizes of nanoparticulate Pt and Pd were 7 and 13 nm, respectively. The nanoparticulate fraction of Pt and Pd in Moscow dust is only about 1.6–1.8%. The average contents of dissolved fraction of Pt and Pd are 10.4% and 4.1%, respectively. The major fractions of Pt and Pd (88–94%) in road dust are associated with microparticles. Although the microparticulate fractions of Pt and Pd are relatively stable, they may become dissolved under changing environmental conditions and, hence, transformed into toxic species.     

Anodic TiO2 Nanotube Layers for Wastewater and Air Treatments: Assessment of Performance Using Sulfamethoxazole Degradation and N2O Reduction

The preparation of anodic TiO₂ nanotube layers has been performed using electrochemical anodization of Ti foil for 4 h at different voltages (from 0 V to 80 V). In addition, a TiO₂ thin layer has been also prepared using the sol–gel method. All the photocatalysts have been characterized by XRD, SEM, and DRS to investigate the crystalline phase composition, the surface morphology, and the optical properties, respectively. The performance of the photocatalyst has been assessed in versatile photocatalytic reactions including the reduction of N₂O gas and the oxidation of aqueous sulfamethoxazole. Due to their high specific surface area and excellent charge carriers transport, anodic TiO₂ nanotube layers have exhibited the highest N₂O conversion rate (up to 10% after 22 h) and the highest degradation extent of sulfamethoxazole (about 65% after 4 h) under UVA light. The degradation mechanism of sulfamethoxazole has been investigated by analyzing its transformation products by LC-MS and the predominant role of hydroxyl radicals has been confirmed. Finally, the efficiency of the anodic TiO₂ nanotube layer has been tested in real wastewater reaching up to 45% of sulfamethoxazole degradation after 4 h.     

Synthesis and Antiviral Properties against SARS-CoV-2 of Epoxybenzooxocino[4,3-b]Pyridine Derivatives

The COVID-19 pandemic is ongoing as of mid-2022 and requires the development of new therapeutic drugs, because the existing clinically approved drugs are limited. In this work, seven derivatives of epoxybenzooxocinopyridine were synthesized and tested for the ability to inhibit the replication of the SARS-CoV-2 virus in cell cultures. Among the described compounds, six were not able to suppress the SARS-CoV-2 virus’ replication. One compound, which is a derivative of epoxybenzooxocinopyridine with an attached side group of 3,4-dihydroquinoxalin-2-one, demonstrated antiviral activity comparable to that of one pharmaceutical drug. The described compound is a prospective lead substance, because the half-maximal effective concentration is 2.23 μg/μL, which is within a pharmacologically achievable range.     

The preparation and properties of “porous silicon–nickel ferrite” nanoheterocomposites for gas detectors

This paper discusses the preparation and properties of gas detectors based on “porous silicon–nickel ferrite” nanocomposites. Impedance spectroscopy was used to measure sensitivity to ethanol and isopropanol vapours in the presence of an alternating electric field. The results were interpreted with the help of an equivalent electrical circuit. In the analysis of the resistive–capacitive properties in the equivalent circuit a constant phase element was used.     

Extraction Properties of Oligodentate Carbamoylmethylphosphine Oxides and β-Aminophosphine Oxides Toward Lanthanides and Rhenium(VII)

Abstract

The extraction properties of a series of carbamoylmethylphosphine oxides and β-aminophosphine oxides with lanthanide metal ions is presented. Tris[bis(2-diphenyl- phosphorylethyl)-aminoethyl]amine is shown to be highly effective for extraction of Re(VII).     

Synthesis of Drim-7,9(11)-diene and Its Hydroxylated Derivatives

This article describes a new efficient synthesis of drim-7,9(11)-diene and its hydroxylated derivates from drim-8-en-7-one. Reduction of this ketone with NaBO₄ in the presence of CeCl₃ · 7H₂O afforded regio- and stereoselectively drim-8-en-7β-ol in a high yield. Its dehydration with H₂SO₄ under mild conditions led to drim-7,9(11)-diene. Noncatalytic oxidation of drim-7,9(11)-diene with OsO₄ and the catalytic oxidation with the pair OsO₄–NMO gave, in a high yield, depending on conditions, driman-7β,8β,9α,11-tetraol or its mixture with drim-7-en-9α,11-diol and drim-9(11)-en-7α,8α-diol. Under optimal conditions the total yield of these diols reached 89%. The separate, noncatalytic oxidation of drim-7-en-9α,11-diol and of drim-9(11)-en-7α,8α-diol with OsO₄ afforded driman-7α,8α,9α,11-tetraol.     

One-pot synthesis of 1-substituted-5-alkylselanyl-1H-tetrazoles from isoselenocyanates: unexpected formation of N-alkyl-N-arylcyanamides and (Z)-Se-alkyl-N-cyano-N,N′-diarylisoselenoureas

1-Substituted-5-alkylsulfanyl-1H-tetrazoles are well known class of organic substances with various applications in medicinal chemistry or photographic industry. Their selenium analogues, 1-substituted-5-alkylselanyl-1H-tetrazoles are, however, much less explored because of the lack of suitable methods for their preparation. In this work we investigated the synthesis of 1-alkyl/aryl-5-alkylselanyl-1H-tetrazoles from synthetically available alkyl/arylisoselenocyanates. One-pot reactions of arylisoselenocyanates with sodium azide and alkylating agent led to the target 5-alkylselanyl-1-aryl-1H-tetrazoles but also to interesting side products, namely N-alkyl-N-arylcyanamides and (Z)-Se-alkyl-N-cyano-N,N′-diarylisoselenoureas. Nevertheless, when alkylisoselenocyanates were utilized as the substrates, the reactions led exclusively to the formation of 1-alkyl-5-alkylselanyl-1H-tetrazoles in good yields. This simple one-pot procedure brings new possibilities for the preparation of variously substituted selenium compounds. It also opens the way to further investigations of selenium isosteres of the widely utilized 5-thiotetrazole moiety in biomedical applications.