Freon (CHF<Subscript>3</Subscript>)-assisted atomization for the determination of titanium using ultrasonic slurry sampling–graphite furnace atomic absorption spectrometry (USS–GFAAS): a simple and advantageous method for solid samples

A simple and advantageous method for the determination of titanium using graphite furnace atomic absorption spectrometry with slurry sampling has been developed. Titanium is one of the refractory elements that form thermally stable carbides in the graphite tube, which leads to severe memory effects. Trifluoromethane (Freon-23) was applied in the purge gas during the atomization step or alternatively just prior to the atomization to successfully eliminate the problems of carbide formation and increase the lifetime of the furnace tube which could be used for more than 600 heating cycles. A flow rate of 40 mL min^–1 (5% of Freon in argon) was used to obtain symmetrical peaks with no tailing. However, when the gas flow rate was too high (250 mL min^–1) the peak-tailing and memory effects reappeared. Ti was determined in various materials covering a wide range of concentrations, from 2.8 g g^–1 to 12% (m/m) Ti. The accuracy of the method was confirmed by analyzing certified reference materials (CRMs) or by comparing the results with those obtained using inductively coupled plasma–atomic emission spectrometry (ICP–AES) after decomposition of the samples. The materials analyzed were soil, plant, human hair, coal, urban particulate matters, toothpaste, and powdered paint.     

Synthesis of Inorganic Structural Isomers By Diffusion‐Constrained Self‐Assembly of Designed Precursors: A Novel Type of Isomerism

The structure of precursors is used to control the formation of six possible structural isomers that contain four structural units of PbSe and four structural units of NbSe₂: [(PbSe)_1.14]₄[NbSe₂]₄, [(PbSe)_1.14]₃[NbSe₂]₃[(PbSe)_1.14]₁[NbSe₂]₁, [(PbSe)_1.14]₃[NbSe₂]₂[(PbSe)_1.14]₁[NbSe₂]₂, [(PbSe)_1.14]₂[NbSe₂]₃[(PbSe)_1.14]₂[NbSe₂]₁, [(PbSe)_1.14]₂[NbSe₂]₂[(PbSe)_1.14]₁[NbSe₂]₁[(PbSe)_1.14]₁[NbSe₂]₁, [(PbSe)_1.14]₂[NbSe₂]₁[(PbSe)_1.14]₁[NbSe₂]₂[(PbSe)_1.14]₁[NbSe₂]₁. The electrical properties of these compounds vary with the nanoarchitecture. For each pair of constituents, over 20 000 new compounds, each with a specific nanoarchitecture, are possible with the number of structural units equal to 10 or less. This provides opportunities to systematically correlate structure with properties and hence optimize performance.     

Improved Synthesis of 1-Bromo-3-buten-2-one

A convenient procedure for the synthesis of 1-bromo-3-buten-2-one, 4, from commercially available 2-ethyl-2-methyl-1,3-dioxolane, 1, is described. The procedure involves three reaction steps: (1) The acetal 1 is converted to 2-(1-bromoethyl)-2-bromomethyl-1,3-dioxolane, 2, by reacting 1 with elemental bromine in dichloromethane to yield 98% of 2. (2) Dehydrobromination of 2 with potassium tert-butoxide in tetrahydrofuran gives 2-bromomethyl-2-vinyl-1,3-dioxolane, 3, in 84–93% yield. (3) Removal of the acetal protection from 3 by formolysis for 6–10 h afforded 1-bromo-3-buten-2-one, 4, in 85–94% yield. A more rapid method is acid hydrolysis of 3 under microwave activation (100 °C, 8–10 min), by which 4 was obtained in 75% yield. Full experimental details are given.

Exploring the operation of a tiny heat engine

We model a tiny heat engine as a Brownian particle that moves in a viscous medium in a sawtooth potential (with or without load) assisted by alternately placed hot and cold heat baths along its path. We find closed form expression for the steady-state current as a function of the model parameters. This enables us to deal with the energetics of the model and evaluate either its efficiency or its coefficient of performance depending upon whether the model functions either as a heat engine or as a refrigerator, respectively. We also study the way current changes with changes in parameters of interest. When we plot the phase diagrams showing the way the model operates, we not only find regions where it functions as a heat engine and as a refrigerator but we also identify a region where the model functions as neither of the two.     

Irreversible Brownian Heat Engine

We model a Brownian heat engine as a Brownian particle that hops in a periodic ratchet potential where the ratchet potential is coupled with a linearly decreasing background temperature. We show that the efficiency of such Brownian heat engine approaches the efficiency of endoreversible engine \(\eta =1-\sqrt{{T_{c}/T_{h}}}\) [23]. On the other hand, the maximum power efficiency of the engine approaches \(\eta ^{MAX}=1-({T_{c}/T_{h}})^{1\over 4}\). It is shown that the optimized efficiency always lies between the efficiency at quasistatic limit and the efficiency at maximum power while the efficiency at maximum power is always less than the optimized efficiency since the fast motion of the particle comes at the expense of the energy cost. If the heat exchange at the boundary of the heat baths is included, we show that such a Brownian heat engine has a higher performance when acting as a refrigerator than when operating as a device subjected to a piecewise constant temperature. The role of time on the performance of the motor is also explored via numerical simulations. Our numerical results depict that the time t and the external load dictate the direction of the particle velocity. Moreover, the performance of the heat engine improves with time. At large t (steady state), the velocity, the efficiency and the coefficient of performance of the refrigerator attain their maximum value. Furthermore, we study the effect of temperature by considering a viscous friction that decreases exponentially as the background temperature increases. Our result depicts that the Brownian particle exhibits a fast unidirectional motion when the viscous friction is temperature dependent than that of constant viscous friction. Moreover, the efficiency of this motor is considerably enhanced when the viscous friction is temperature dependent. On the hand, the motor exhibits a higher performance of the refrigerator when the viscous friction is taken to be constant.     

A multianalytical approach to investigate stone biodeterioration at a UNESCO world heritage site: the volcanic rock-hewn churches of Lalibela, Northern Ethiopia

A multianalytical approach combining Optical Microscopy (OM), Backscattered Variable Pressure Scanning Electron Microscopy + Energy Dispersive X-ray Spectroscopy (VP-BSEM + EDS), Powder X-ray Diffractometry (PXRD), Raman Spectroscopy, and Microbiological techniques has been applied to characterize decay products and processes occurring at the surface of two rock-hewn churches (Bete Gyorgis and Bete Amanuel) at the UNESCO’s World Heritage site of Lalibela, Northern Ethiopia. The two churches were carved into volcanic scoria deposits of basaltic composition. In their geological history, the Lalibela volcanic rocks underwent late to post-magmatic hydrothermal alteration together with partial laterization and are therefore characterized by a decay-prone highly vesicular microtexture with late stage to post-magmatic precipitation of secondary mineral phases (calcite–zeolite–smectite). The main objective of the study was to gain a better insight into the weathering products and mechanisms affecting the surface of the stone monuments and to assess the relative contribution of natural “geological” weathering processes versus biological/salt attack in stone decay at this unique heritage site. Results indicate that while the main cause of bulk rock deterioration and structural failure could be related to the stone inherited “geological” features, biological attack by micro- (bacteria) and/or macro- (lichens) organisms is currently responsible for severe stone surface physical and chemical weathering leading to significant weakening of the stone texture and to material loss at the surface of the churches walls. A prompt and careful removal of the biological patinas with the correct biocidal treatment is therefore recommended.     

Overview of sample introduction techniques prior to GC for the analysis of volatiles in solid materials

Sample preparation and introduction techniques are very critical steps in gas chromatography analysis and particularly in the analysis of volatiles in solid samples. In these cases, they can be divided into two main categories: direct and indirect approaches, based on how the solid sample is treated, i.e. with and without dissolution (or extraction) of analytes from the solid sample. To enable routine application, coupling with sample preparation techniques (especially solid or solvent‐based microextractions) is needed to achieve automation. Here, an overview of the most common sample introduction techniques for gas chromatography with their advantages and drawbacks is presented and discussed, including references to relevant examples. So, this review can serve as guidance for new users.     

Thermodynamics of peptide insertion and aggregation in a lipid bilayer

A variety of biomolecules mediate physiological processes by inserting and reorganizing in cell membranes, and the thermodynamic forces responsible for their partitioning are of great interest. Recent experiments provided valuable data on the free energy changes associated with the transfer of individual amino acids from water to membrane. However, a complete picture of the pathways and the associated changes in energy of peptide insertion into a membrane remains elusive. To this end, computational techniques supplement the experimental data with atomic-level details and shed light on the energetics of insertion. Here, we employed the technique of umbrella sampling in a total 850 ns of all-atom molecular dynamics simulations to study the free energy profile and the pathway of insertion of a model hexapeptide consisting of a tryptophan and five leucines (WL5). The computed free energy profile of the peptide as it travels from bulk solvent through the membrane core exhibits two minima: a local minimum at the water-membrane interface or the headgroup region and a global minimum at the hydrophobic-hydrophilic interface close to the lipid glycerol region. A rather small barrier of roughly 1 kcal mol (-1) exists at the membrane core, which is explained by the enhanced flexibility of the peptide when deeply inserted. Combining our results with those in the literature, we present a thermodynamic model for peptide insertion and aggregation which involves peptide aggregation upon contact with the membrane at the solvent-lipid headgroup interface.