Thermal properties of pressure sintered alumina–graphene composites

Journal of Thermal Analysis and Calorimetry - The work concerns the alumina–graphene materials sintered by two different pressure methods. The different particle sizes of graphene were used....     

Roles of rhenium diimine complexes as metal‐ion probes and photosensitizers in functional polyurethanes

Polyurethanes incorporated with rhenium diimine complexes were synthesized. The polymers exhibited interesting morphologies and solution properties. Results from gel permeation chromatography suggested the formation of polymer aggregates in solutions. The polymers could act as probes for metal ions. The addition of metal ions to polymer solutions led to significant changes in the electronic absorption properties of the polymer solutions. This was attributed to the interactions between the polyether moieties and metal ions. The metal complexes could also act as efficient photosensitizers. After doping with charge‐transport viologens, the photoconductivity of the polymers was greatly enhanced. The experimental quantum efficiency was simulated with Onsager's theory. The thermalization distances and the primary yields were typically 12–14 Å and 10^?3, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1708–1715, 2003     

Determination of traces of cobalt in the presence of nioxime and cetyltrimethylammonium bromide by adsorptive stripping voltammetry

A sensitive method of Co(II) determination by adsorptive stripping voltammetry is presented. The method exploits the enhancement of cobalt peak current observed in the system Co(II)-nioxime-cetyltrimethylammonium bromide-piperazine-N,N′-bis(2-ethanesulfonic acid). The calibration plot for an accumulation time of 60 s is linear from 5 × 10⁻¹¹ to 3 × 10⁻⁹ mol L⁻¹. The relative standard deviation is 3.8% for Co(II) determination at concentration 1 × 10⁻⁹ mol L⁻¹. The detection limit is 1.7 × 10⁻¹¹ mol L⁻¹. The validation of the method is performed by the analyses of certified reference materials and comparing the result of Co(II) determination in river water sample by the proposed method with those obtained by ET AAS. The main advantage of this new system is the micro-trace Co(II) determination by adsorptive stripping voltammetry, as compared to those described before, a low concentration of the supporting electrolyte used, and so commercially available reagents without additional purification can be used.     

Thiyl radical interaction with pyrimidine C5-C6 double bond

Addition and elimination interaction of thiyl radicals with the C5-C6 double bond in pyrimidines was studied by the pulse radiolysis technique in aqueous solution with the use of different monitoring systems. For this purpose, p-thiocresol, cysteamine hydrochloride, and mercaptoethanol were used. The rate constants of addition and elimination of thiyl radicals were determined by applying the modified version of ACUCHEM (computer program for modeling complex reaction systems). Aliphatic thiyl radicals add to the pyrimidine C5-C6 double bond with k = 1.0-3.0 x 10(7) dm3 mol(-1) s(-1), whereas elimination takes place with k = 0.7-2.0 x 10(5) s(-1). Quantum chemical calculations at the B3LYP/6-31G(d)/PCM level show that the addition should occur at the C6 position of the pyrimidine ring and that the energy of interaction between thiyl radicals and the pyrimidine double bond C5-C6 is low.     

Asymmetry of electron transmission through monolayers of helical polyalanine adsorbed on gold surfaces

Polyalanine derivatives containing cysteamine linker R-(Ala)14NH-(CH2)2-SH, where R is ferrocenecarbonyl or hydrogen, were synthesized and then used to form self-assembled monolayers on gold. The tilt angles and the packing density of the molecules within monolayer assemblies were determined by FTIR spectroscopy and scanning tunneling microscopy, respectively. Electrochemical properties of monolayer-modified electrodes were studied using cyclic voltammetry and impedance spectroscopy. Measurements of electron-transfer rates using electrochemical techniques and scanning tunneling spectroscopy revealed asymmetry dependent on the applied voltage. It is suggested that the observed electron-transfer behavior is connected with the electric field generated by the molecular dipole of the polyalanine helix.     

Carbon-13 kinetic isotope effect of the decarbonylation of oxalic acid

Carbon-13 intramolecular kinetic isotope effects in the decarbonylation of oxalic acid dihydrate of natural isotopic composition by SO₃ and by fuming sulphuric acid at room temperature and decarbonylation of oxalic acid dihydrate by 100% H₃PO₄ in the temperature interval 80–150°C have been determined. The obtained isotopic and kinetic results have been compared with the earlier¹³C experimental and theoretical studies in other solvents.     

Gas-phase solvation of protonated aliphatic amines: methyl,ethyl, n-propyl,and iso-propylamine

The thermodynamic quantities K_{n?1 n}, ΔG⁰_{n?1, n} and ΔS⁰_n?1, n for the gas phase equilibrium reactions RNH⁺₃(RNH₂)_n?1 + RNH₂ = RNH⁺₃(RNH₂)_n, where n ? 3 and R indicates an alkyl group (CH₃, C₂H₅, n-C₃H₇ and iso-C₃H₇), have been determined.     

All-solid-state planar miniature ion-selective chloride electrode

All-solid-state ion-selective electrodes with plastic membrane (poly(vinyl chloride) (PVC), bis(2-ethylhexyl) sebacate (DOS), methyltri-n-tetradecylammonium chloride (MTTACl)), a conducting poly(pyrrole) (PPy) film doped either with chloride ions (PPyCl) or hexacyanoferrate(II) ions (PPyFeCN), and glassy carbon (GC) or screen-printed graphite layer (S-PG) as an inner electric contact were investigated. All the electrodes show close to Nernstian response, but their lifetimes vary. The at least 2-months lifetime of screen-printed electrodes is only achieved for the electrodes containing PPyFeCN (cation-exchanging film). Shorter lifetime of other screen-printed electrodes, i.e. without PPy, or with PPyCl (anion-exchanging film), was attributed to the diffusion of anionic products of the hydrolysis of organic components of the graphite paste used to prepare the electric contact. The properties of miniature, screen-printed electrodes comprising PPyFeCN solid contact, were comparable to those ion-selective electrodes with PPy solid contact (regardless the ion-exchanging characteristic of the polymer) deposited on GC electric contact.     

Improvement in the synthesis of metallophthalocyanines using microwave irradiation

A successful application of microwave irradiation, in which phthalocyanines were synthesized under solventless conditions from 1,2-phthalonitrile or phthalic anhydride and urea in the presence of metal templates is described. It was found that in comparison with conventional heating, the microwave process is a very useful alternative for cyclotetramerization processes because of reduction of the reaction time, better yield, and easy-to-perform procedure.     

The thermoelastic behaviour of the orientationally disordered ionic crystals in two dimensions

The anomalous temperature dependence of the elastic constantsc ₁₁ andc ₆₆ and the elastic instability temperatureT _c are obtained in the two-dimensional microscopic model of the alkali cyanides crystals. It has been found, by means of the Michel and Naudts' theory of the translation rotation coupling, that the orientational disorder in the high-temperature phase leads to the critical softening of the shear elastic constantc ₆₆.