Thermal properties of pressure sintered alumina–graphene composites

Journal of Thermal Analysis and Calorimetry - The work concerns the alumina–graphene materials sintered by two different pressure methods. The different particle sizes of graphene were used....     

Roles of rhenium diimine complexes as metal‐ion probes and photosensitizers in functional polyurethanes

Polyurethanes incorporated with rhenium diimine complexes were synthesized. The polymers exhibited interesting morphologies and solution properties. Results from gel permeation chromatography suggested the formation of polymer aggregates in solutions. The polymers could act as probes for metal ions. The addition of metal ions to polymer solutions led to significant changes in the electronic absorption properties of the polymer solutions. This was attributed to the interactions between the polyether moieties and metal ions. The metal complexes could also act as efficient photosensitizers. After doping with charge‐transport viologens, the photoconductivity of the polymers was greatly enhanced. The experimental quantum efficiency was simulated with Onsager's theory. The thermalization distances and the primary yields were typically 12–14 Å and 10^?3, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1708–1715, 2003     

Asymmetry of electron transmission through monolayers of helical polyalanine adsorbed on gold surfaces

Polyalanine derivatives containing cysteamine linker R-(Ala)14NH-(CH2)2-SH, where R is ferrocenecarbonyl or hydrogen, were synthesized and then used to form self-assembled monolayers on gold. The tilt angles and the packing density of the molecules within monolayer assemblies were determined by FTIR spectroscopy and scanning tunneling microscopy, respectively. Electrochemical properties of monolayer-modified electrodes were studied using cyclic voltammetry and impedance spectroscopy. Measurements of electron-transfer rates using electrochemical techniques and scanning tunneling spectroscopy revealed asymmetry dependent on the applied voltage. It is suggested that the observed electron-transfer behavior is connected with the electric field generated by the molecular dipole of the polyalanine helix.     

Improvement in the synthesis of metallophthalocyanines using microwave irradiation

A successful application of microwave irradiation, in which phthalocyanines were synthesized under solventless conditions from 1,2-phthalonitrile or phthalic anhydride and urea in the presence of metal templates is described. It was found that in comparison with conventional heating, the microwave process is a very useful alternative for cyclotetramerization processes because of reduction of the reaction time, better yield, and easy-to-perform procedure.     

Determination of subnanomolar concentrations of cobalt by adsorptive stripping voltammetry at a bismuth film electrode

Procedures for trace cobalt determinations by adsorptive stripping voltammetry at in situ and ex situ plated bismuth film electrodes are presented. These exploit the enhancement of the cobalt peak obtained by using the Co(II)–dimethylglyoxime–cetyltrimethylammonium bromide–piperazine-N,N-bis(2-ethanesulfonic acid) system. The calibration graph for an accumulation time of 120 s was linear from 2 × 10^–10 to 2 × 10^–8 mol L^–1. The relative standard deviation from five determinations of cobalt at a concentration of 5 × 10^–9 mol L^–1 was 5.2%. The detection limit for an accumulation time of 300 s was 1.8 × 10^–11 mol L^–1. The proposed procedure was applied to cobalt determination in certified reference materials and in tap and river water samples.     

Grafting of styrene onto low molecular weight polymers and copolymers of butadiene

The grafting of styrene onto low molecular weight polybutadienes and butadiene–styrene co-polymers was studied. A mathematical method was used for the design of experiments and for the determination of the optimum grafting conditions with respect to the conversion of styrene and the efficiency of grafting. The reaction parameters were temperature (65–105°C), time (2–10 hr), concentration of the initiator, polymer to monomer ratio (10/90–90/10) and dilution by solvent (toluene). The optimum grafting conditions were chosen under which 50–60 wt-% of styrene was grafted onto backbone polymer at a high conversion of the monomer. It was found that the reactions producing graft copolymer prevailed over the styrene homopolymerization when the temperatures employed were lower (65–85°C), and the reaction time (8–10 hr), backbone polymer/monomer ratio, and the dilution by solvent were higher. The efficiency, density, and degree of grafting were found to increase with the increase in the molecular weight of the backbone polymer. The efficiencies and densities of grafting onto low molecular weight polybutedienes were higher than those of grafting onto low molecular weight butadiene–styrene copolymers. Grafting efficiencies and grafting densities were in the ranges 37.8–61.6 wt % and 0.06–0.26, respectively, in the studied range of number-average molecular weights (M?_n = 2400–6000).     

A Stopped-flow Study on the Kinetics and Mechanism of CO2 Uptake by the cis-[Cr(1,10-phenanthroline)2(OH2)2]3+ Complex Ion

The kinetics of the reaction between gaseous CO₂ and the cis-[Cr(phen)₂(OH₂)₂]³⁺ ion leading to the formation of the carbonato complex ion, have been studied over the pH and temperature ranges: 3 < pH < 6 and 5 < T < 25 °C, respectively, at a constant ionic strength of 1 m (NaClO₄). Investigations were carried out using the stopped-flow spectrophotometry technique in the UV–Vis range: 340–700 nm. The major reactant species in the pH range studied was cis-[Cr(phen)₂(OH)(OH₂)]²⁺ ion, which underwent reaction with CO₂ to form cis-[Cr(phen)₂(OH₂)(HCO₃)]²⁺ ion. Subsequently, slower ring closure of the latter species to form the bidentate carbonato chelate was observed. The possible mechanism has been discussed and the activation parameters ΔH^† and ΔS^† were also determined for the reaction studied.     

Kinetic Spectrophotometric Determination of Chromium (VI) by Oxidation of Sodium Pyrogallol-5-sulphonate by Hydrogen Peroxide

Summary. A new selective, sensitive, and simple kinetic method is developed for the determination of trace amounts of chromium (VI). The method is based on the catalytic effect of Cr(VI) on the reaction of sodium pyrogallol-5-sulphonate (PS) with hydrogen peroxide. The reaction is followed spectrophotometrically by tracing the oxidation product at 437nm within 1min after addition of H₂O₂. The optimum reaction conditions are PS (1.32·10^–3mol·dm^–3), H₂O₂ (0.32mol·dm^–3), HClO₄ (2.6·10^–3mol·dm^–3) at 25°C. Following this procedure, chromium (VI) can be determined with a linear calibration graph up to 0.25ng·cm^–3 and a detection limit of 0.024ng·cm^–3, based on the 3 criterion. The interference effect of several species was also investigated and it was found that the most common cations and anions do not interfere with the determination. The developed procedure was successfully applied to the determination of Cr(VI) and total Cr in river waters and total Cr in herbal samples.     

Poly[[pentaaquasulfato‐μ4‐(R,R)‐tartrato‐dicadmium(II)] trihydrate]

The asymmetric unit in the title compound, {[Cd₂(C₄H₄O₆)(SO₄)(H₂O)₅]·3H₂O}_n, is composed of two cadmium cations, one (R,R)‐tartrate and one sulfate anion, five aqua ligands and three solvent water molecules. One of the cadmium ions is coordinated in an octahedral environment, whereas the second is surrounded by seven O atoms in a pentagonal–bipyramidal geometry. Both types of coordination polyhedra form two sets of perpendicular non‐intersecting polymeric chains. CdO₆ octahedra share two corners, while CdO₇ units are joined by a bridging carboxylate group. An extensive hydrogen‐bond pattern involving all of the OH groups contributes to the stabilization of the structure.     

Ionization energies of hypervalent Li2F,Li2Cl and Na2Cl molecules obtained by surface ionization electron impact neutralization mass spectrometry

Ionization energies of hypervalent Li(2)F, Li(2)Cl and Na(2)Cl molecules detected by surface ionization electron impact neutralization mass spectrometry are reported. The ionization energies were 3.78 +/- 0.2 eV for Li(2)F, 4.93 +/- 0.2 eV for Li(2)Cl, and 4.21 +/- 0.2 eV for Na(2)Cl. The ionization energies (IE) agree with theoretical ionization energies calculated by ab initio methods, supporting the theoretical prediction that Li(2)F has a hyperlithiated configuration in which the odd electron delocalizes over the two lithiums and with photoionization measurement. The first ionization energy of Na(2)Cl was experimentally confirmed earlier and for Li(2)Cl as well.8 We have developed and used this new approach for the problem--in the present work ions were first formed by surface ionization, followed by electron attachment (neutralization).