Application of a mercuric iodide detector for the exploration and exploitation of niobium deposits in remote areas

The comparison of an ambient temperature mercuric iodide spectrometer (HgI₂) with a conventional cooled Si(Li) spectrometer is presented for the determination of niobium in Venezuelan laterites in the laboratory. The energy resolution of the HgI₂ spectrometer was only about 590 eV (FWHM) at 5.9 keV compared to about 150 eV for the conventional Si(Li) spectrometer. The efficiency was about 5 times lower in the region of the Nb_K peak as compared to the Si(Li) detector. Even though its energy resolution and efficiency is much poorer than the conventional Si(Li), the results it produced for the determination of niobium were acceptable for use in the exploration and exploitation of a niobium-rich deposit such as Cerro Impacto, Estado Bolívar, Venezuela.     

The Role of γ -Aminopropyltriethoxysilane (γ -APS) on Thermal Stability of TEOS-PDMS Ormosils

The degradation process of TEOS-PDMS Ormosils containing different amounts of γ -APS has been studied by means of DTA, TG, FTIR and ²⁹Si-NMR measurements. It has been found that the amount of γ -APS improved the thermal properties of Ormosil materials. The increase in γ -APS content causes the increment on the decomposition temperatures and activation energies of the studied Ormosils. These results have been attributed to the favourable effect of γ -APS in the copolymerisation reaction between TEOS and PDMS molecules. ²⁹Si-NMR analyses have shown that the incorporation of γ -APS increases the concentration of D(Q) units in the Ormosil structure, i.e., increases the number of TEOS molecules bonded to PDMS ones. Initial decomposition temperature (IDT), temperature of maximum weight loss rate (T_max), integral procedure decomposition temperature (IPDT) and activation energy values (E) were calculated from different equations which described the degradation of these materials. Addition of 10 wt% γ -APS produced an increase of 63^∘C in the IDT and of 115 and 110^∘C, respectively, for T_max and IPDT (up to 478 and 610^∘C) compared to the free γ -APS Ormosil. Activation energy values also rise up to 69.4 kJ⋅ mol⁻¹ by introducing 10 wt% of γ -APS.     

Determination of six metals in galician red wines (in northwestern Spain) by capillary electrophoresis

A simple technique is described for the routine simultaneous capillary electrophoretic determination of 6 cations in wine. Separation was achieved on a fused silica capillary column with a UV-Cat-1, alpha-hydroxysobutyric acid and 18-crown-6-ether buffer at pH 4.5 and indirect UV detection at 214 nm. The content of magnesium, sodium, potassium, calcium, manganese, and lithium was determined. The method is quantitative, with recoveries in the 92-102% range, and linear over more than one order of magnitude. The precision is better than 2.5-3.4%. The method is sensible, with detection limits between 0.01 and 0.06 mg/L. Twenty-five red wines with a Certified Brand of Origin from Galicia (north-western Spain) were analyzed by the proposed method. Various wines showed very similar electrophoretic profiles, but significant quantitative differences were observed.     

The use of emulsions for the determination of methylmercury and inorganic mercury in fish-eggs oil by cold vapor generation in a flow injection system with atomic absorption spectrometric detection

An on-line time based injection system used in conjunction with cold vapor generation atomic absorption spectrometry and microwave-aided oxidation with potassium persulfate has been developed for the determination of the different mercury species in fish-eggs oil samples. A three-phase surfactant-oil-water emulsion produced an advantageous flow when a peristaltic pump was used to introduce the highly viscous sample into the system. The optimum proportion of the oil-water mixture ratio was 2:3 v/v with a Tween 20 surfactant concentration in the emulsion of 0.008% v/v. Inorganic mercury was determined after reduction with sodium borohydride while total mercury was determined after an oxidation step with persulfate prior to the reduction step to elemental mercury with the same reducing agent. The difference between total and inorganic mercury determined the organomercury content in samples. A linear calibration graph was obtained in the range 0.1-20 micrograms l-1 of Hg2+ by injecting 0.7 ml of samples. The detection limits based on 3 sigma of the blank signals were 0.11 and 0.12 microgram l-1 for total and inorganic mercury, respectively. The relative standard deviation of ten independent measurements were 2.8 and 2.2% for 10 micrograms l-1 and 8.8 and 9.0% for 0.1 microgram l-1 amounts of total and inorganic mercury, respectively. The recoveries of 0.3, 0.6 and 8 micrograms l-1 of inorganic and organic mercury added to fish-eggs oil samples ranged from 93.0 to 94.8% and from 100 to 106%, respectively. Good agreement with those values obtained for total mercury content in real samples by electrothermal atomic absorption spectrometry was also obtained, differences between mean values were < 7%. With the proposed procedure, 22 proteropterous catfish-eggs oil samples from the northwestern coast of Venezuela were measured; while the organic mercury lay in the range 2.0 and 3.3 micrograms l-1, inorganic mercury was not detected.     

Etude de la chloration du polychlorure de vinyle en fonction de sa tacticite

Polyvinyl chloride samples of various tacticity have been prepared and photochlorinated in CCl₄ for 4 hr. The chlorination degree correlates directly with the degree of syndiotacticity. Initial PVC with syndiotacticity about 56 per cent, which can be regarded as alternate sequences of syndiotactic and isotactic diads, is quickly chlorinated. The mechanism of chlorine attack on the macromolecula is directly connected with the stereoregularity.     

On-line sorbent extraction, preconcentration and determination of lead by atomic absorption spectrometry

A method for the quantitative preconcentration of lead based on an existing batch process was developed for implementation in a flow system including a flame AAS detector. Lead can be quantitatively preconcentrated as pyrrolidinedithiocarbamate or dithizonate on an activated carbon minicolumn. The chelates are eluted in methyl isobutyl ketone and introduced directly into the nebuliser-burner. An enrichment factor of 50 is typically obtained for a preconcentration time of 2 min (lead can be determined at concentrations between 15 and 400 ng/ml), which results in a throughput of ca. 25 samples per hr. The sensitivity achieved with the two reagents is similar, but the selectivity provided by APDC exceeds that of dithizone. Based on the results obtained in the determination of lead in reference materials (minerals and skim milk), the proposed APDC method is applicable to real samples.     

Crystal structures and magnetic properties of two low-dimensional materials constructed from [Mn(III)(salen)H2O]+ and [M(CN)8](3-/4-) (M = Mo or W) precursors

The syntheses, X-ray structures, and magnetic behaviors of two new cyano-bridged assemblies, the molecular [Mn(III)(salen)H2O]3[W(V)(CN)8].H2O (1) and one-dimensional [Mn(salen)(H2O)2]2[[Mn(salen)(H2O)][Mn(salen)]2[Mo(CN)(8)]].0.5ClO4.0.5OH.4.5H2O (2), are presented. Compound 1 crystallizes in the monoclinic system, has space group P2(1)/c, and has unit cell constants a = 13.7210(2) A, b = 20.6840(4) A, c = 20.6370(2) A, and Z = 4. Compound 2 crystallizes in the triclinic system, has space group P, and has unit cell dimensions a = 18.428(4) A, b = 18.521(3) A, c = 18.567(4) A, and Z = 2. The structure of 1 consists of the asymmetric V-shaped Mn-NC-W-NC-Mn-O(phenolate)-Mn molecules, where W(V) coordinates with [Mn(salen)H2O] and singly phenolate-bridged [Mn(salen)H2O]2 moieties through the neighboring cyano bridges. The [W(V)(CN)8]3- ion displays distorted square-antiprism geometry. The structure of 2 consists of the cyano-bridged [Mn3(III)Mo(IV)]n- repeating units linked by double phenolate bridges into one-dimensional zigzag chains. The Mn(III) centers are bound to Mo(IV) of square-antiprism geometry through the neighboring cyano bridges. The magnetic studies of 1 reveal the antiferromagnetic intramolecular interactions through the CN and phenolate bridges and the relatively weak intermolecular interactions. Compound 1 becomes antiferromagnetically ordered below TN = 4.6 K. The presence of the magnetic anisotropy is documented with the MH measurements carried out for both polycrystalline and single-crystal samples. At T = 1.9 K, the spin-flop transition is observed in the field of 18 kOe applied parallel to the bc plane, which is the easy plane of magnetization. Field dependence of magnetization of 1 shows field-induced metamagnetic behavior from the antiferromagnetic ground state of ST = 3/2 to the state of ST = 5/2. The magnetic properties of 2 indicate a weak antiferromagnetic interaction between Mn(III) centers in double-phenolate-bridged [Mn(III)(salen)]2 dinuclear subunits and a very weak ferromagnetic interaction between them through the diamagnetic [Mo(IV)(CN)8]4- spacer.     

Highly enantioselective Cu-catalysed asymmetric 1,4-addition of diphenylzinc to cyclohexenone

Highly enantioselective Cu-catalysed 1,4-addition of diphenylzinc to cyclohexenone has been achieved for the first time using a monodentate phosphoramidite ligand.     

Desorption of chloroorganic compounds from a bed of activated carbon

The desorption of 1,2-dichloroethane from a bed of DTO activated carbon after adsorption from aqueous solution has been investigated. The desorption process was carried out using steam. The basic characteristics of the process were determined. The studies were performed in the temperature range 100-160 degrees C. A steam consumption indicator reduces with an increase of temperature from 100 to 140 degrees C. An elevation of temperature above 140 degrees C does not cause an improvement in the desorption efficiency. The number of performed cycles does not reduce the adsorption capacity of used activated carbon. Studies on the regeneration of the bed saturated with a seven-component mixture of chloroorganic compounds at temperature of 140 degrees C were carried out. The degree of removal of the sum of chloro-derivatives exceeded 0.96 at a volume ratio of steam (recalculated on the condensate) to bed of about 10. It was found that the dechlorination proceeds during desorption at elevated temperature. The quantitative ratio of chloro-derivatives in the desorbate was changed in comparison to the composition of wastewater directed to the adsorption.