Determination of boron in nickel-base alloys by the dianthrimide method

The dianthrimide method for the determination of boron in iron and low-alloy steels may be applied to nickel-base materials. The sample is dissolved, without any loss of boron, by hydrochloric and sulphuric acids and the resulting boric acid determined spectrophotometrically with dianthrimide. Background corrections are necessary to compensate for the absorbance from ions such as nickel and iron.     

Carbon-13 and nitrogen-15 nuclear magnetic resonance of physostigmine (eserine)

The ¹⁵N and ¹³C nmr spectra of physostigmine are discussed along with complete assignment of the signals. This alkaloid ¹⁵ N nmr spectrum is notable because it contains nitrogens in three different environments.     

Synthesis and X-Ray Analysis of a Nickel Triphenyl-Cyclopropenyl Complex. A mo-interpretation of the geometry and bonding in the (C3H3)ML3-type of complexes

The reaction of [(C₃Ph₃)Ni(PPh₃)₂]ClO₄ with P(CH₂CH₂PPh₂)₃(pp₃) and NaBPh₄ yields the [(C₃Ph₃)Ni(pp₃)]BPh₄-complex. After long exposure of the solution of this compound in acetone/butanol to the air a new derivative [(C₃Ph₃)-Ni(pp₂po)]BPh₄· 0.5 C₄H₉OH, where pp₂po is (Ph₂PCH₂CH₂)₂P(CH₂ CH₂POPh₂), is obtained. Complete X-ray analysis has been carried out for the latter complex: a=18.303 (5); b=29.445 (6), c=13.305 (5) Å, β=112.70 (9)°; space group monoclinic, P2₁/a, Z=4. Disorder problems were encountered in the refinement of the structure. The best R is 0.093. One of the arms of the parent pp₃-molecule, not coordinated to the metal, undergoes oxidation. The Ni-atom, coordinated by the three remaining P-atoms of the ligand, is also linked in a roughly η³-mode to the cyclopropenium ligand. The geometry of the molecule is examined in detail. Extended HMO-calculations were performed to interpret how the variation of P? Ni? P angles affects the bonding between the NiP₃- and C₃H₃-fragments. The conclusion is that the overall energy of the complex may be lowered in spite of a weakening of the Ni-cyclopropenium linkage. Extensions are made to other systems containing a linkage between a metal and a X₃-ring (X=P,As).     

Synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines

Methods for the synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines were developed. The principal route to the required intermediate 2-chloropyridines was based on rearrangements of mono N-oxides of 2,2′-bipyridine, 2,3′-bipyridine, 3,3′-bipyridine, 2,4′-bipyridine and 4,4′-bipyridine with phosphorus oxychloride. Reaction of 3,3′-bipyridine 1-oxide or 2,2′-bipyridine 1-oxide with phosphorus oxychloride gave mixtures of chloro isomers. Reaction with acetic anhydride, 3,3′-bipyridine 1-oxide and 2,2′-bipyridine 1-oxide gave exclusively [3,3′-bipyridine]-2(1H)-one and [2,2′-bipyridine]-6(1H)-one, respectively. 1,2,4-Triazolo[4,3-a]pyridines with pyridinyl groups at the 5,6,7 and 8 positions were synthesized.     

6- and 7-aryl-1,2,4-triazolo[4,3-b]-1,2,4-triazines. Synthesis and characterization

Synthetic methods for the preparation of 6-aryl-1,2,4-triazolo[4,3-b]-1,2,4-triazines ( 1 ) and the 7-aryl isomers ( 2 ) are described. Compounds 1 were prepared from aryl glyoxaldoximes 76 via 6-aryl-1,2,4-triazin-3(2H)ones ( 75 ). A simple procedure for the preparation of the 7-aryl isomers was effected using arylglyoxals 11 and the triazoles ( 4, 12a and 12b ). However, complete regioselectivity was not realized in all cases, especially when the triazoles were substituted at the C-5 position. A regiospecific synthesis of the 7-aryl isomers 2 was developed via the 3-methylthio-5-aryl-1,2,4-triazines ( 61 ). The structure of the parent 6-phenyl derivative 5 was confirmed by x-ray crystallography.     

膜流动电位测试中Ag-AgCl电极的制备及稳定性研究

膜的动电特性研究中,往往采用流动电位方法。该方法中,Ag-Ag Cl测试电极的质量是影响测试准确性的关键要素。本文采用正交试验设计和方差分析,着重考察电解法制备Ag-Ag Cl电极过程中,电流强度(I)、氯化时间(t)、电解质溶液浓度(CHCl)、电极来源(n)、烘烤温度(T)、活化电极溶液浓度(CKCl)等因素对Ag-Ag Cl电极稳定性的影响。得到Ag-Ag Cl电极的最优制备参数为:电流密度3.0m A/cm2,氯化时间50min,盐酸浓度0.1mol·L-1,烘烤温度120℃,活化电极溶液(KCl)浓度0.001mol·L-1;最显著影响因素为电极来源,显著影响因素为氯化时间和烘烤温度。对最优条件组合下制备的AgAg Cl电极,进行了稳定性实验,结果表明:制备的电极具有较好的稳定性,24h内电极电位漂移量小于0.10mv,7天内电极电位漂移量小于0.2mv;在聚偏氟乙烯中空纤维超滤膜流动电位测试中,流动电位与流动压差具有良好的线性和可重复性,回归曲线R20.99,变化规律符合Helmholtz-Smoluehowski公式,可以较好满足膜的流动电位测试要求。     

Expressions for the Activity Coefficients and Osmotic Coefficients of Solutions of Electrolytes and Nonelectrolytes Based on the Hydration Model of Zavitsas

In two papers Zavitsas described a model for the thermodynamic properties of aqueous solutions of a single electrolyte or nonelectrolyte (Zavitsas, J Phys Chem B 105:7805–7817, 2001; J Solution Chem 39:301–317, 2010) in which he assumed that part of the water is so strongly bound to the solute that it can be considered as part of it, and thus only the remaining unbound water is considered to be the solvent. He showed that when the usual water mole fraction was replaced by the resulting mole fraction of unbound water, obtained by optimizing an effective hydration number, basically linear relations were obtained to fairly high molalities for the freezing temperature lowering, boiling temperature elevation, and the water activity/vapor pressure of water. However, Zavitsas only considered the properties of the solvent, not the solute. In this paper we derive the corresponding expressions for the activity coefficient of the solute for the usual molality scale based on 1 kg of water, for the modified molality scale based on 1 kg of unbound water, for the mole fraction scale based on the total number of moles of water, and for the modified mole fraction scale based on the number of moles of unbound water. These equations show that if the hydration number is larger than the stoichiometric ionization number of the electrolyte, then all four types of mean activity coefficients are predicted to always be >1 (nearly all hydration numbers reported by Zavitsas for electrolyte solutions are greater than the corresponding ionization numbers), which directly conflicts with extensive experimental and theoretical evidence that the mean activity coefficients of electrolytes in aqueous solutions always initially decrease below unity. In contrast, for nonelectrolyte solutions, the hydration model of Zavitsas gives more realistic values of the activity coefficients.     

镁掺杂氧化铈整体式催化剂催化CO2和CH3OH直接合成碳酸二甲酯

采用共沉淀法成功地合成了不同Mg掺杂量的Ce_1-xMg_xO₂(x=0.05、0.10、0.15、0.20)固溶体催化材料,并运用透射电子显微镜(TEM)、X射线衍射(XRD)、氮气吸附-脱附测试、拉曼光谱、X射线光电子能谱(XPS)、CO₂程序升温脱附(CO₂-TPD)等技术对这些材料进行了表征。结果发现,通过调控CeO₂晶格中Mg的含量,可以调控所制备的Ce_1-xMg_xO₂催化材料的粒径、比表面积、表面缺陷等。其中Ce_0.90Mg_0.10O₂展现了最佳的表面性质,具有最小的平均粒径(约5.8 nm),最大的比表面积(约136 m2·g^-1)以及最高的表面氧含量(31.98%)。将Ce_1-xMg_xO₂催化材料涂覆在堇青石蜂窝陶瓷上制成整体催化剂,考察其对CO₂和CH₃OH直接合成碳酸二甲酯的催化性能。在140℃、2.4 MPa、反应2 h的条件下,Ce_0.90Mg_0.10O₂整体催化剂上碳酸二甲酯的收率高达20.21%,催化效果明显优于CeO₂和其余的Ce_1-xMg_xO₂(x=0.05、0.15、0.20)催化材料。