Development of high-speed video cameras for Dynamic PIV

The most promising next generation Image Velocimtry (IV) is the high-speed Dynamic PIV. It requires the development of innovative high-speed video camera sensors. We started by specifying the required performance of these new sensors, for measurements in air and water flows. These criteria founded on the most recent developments in PIV algorithms and incorporate results from a large questionnaire survey of users of high-speed video cameras in Japan. The results suggest that the followings are required: (1) frame rate of 1,000,000 fps, (2) pixel count of 1,000,000 pixels, (3) frame storage capacity of 100–200 frames for tracing a single event and 10,000 frames for turbulent measurements, (4) gray levels of 4–8 bits for PTV; 12 bits for observation. Finally, we reviewed the state of the art of high-speed video-image sensors. Currently the standard parallel-readout sensors can operate at 1 Kfps with a pixel count of approximately 1 Kpixels. The In-situ Storage Image Sensor (ISIS) developed by the authors has recently achieved frame rates of 1 Mfps.     

Synthesis and orientation study of a magnetically aligned liquid‐crystalline chitin/poly(acrylic acid) composite

A high magnetic field of 5 T was used to fabricate a magnetically aligned, optically anisotropic, liquid‐crystalline chitin/poly(acrylic acid) composite. The aligned mesophase was fixed by photoinitiated free‐radical polymerization. From an examination of polarized optical micrographs and an X‐ray diffraction study, a high degree of orientation of 0.70 was observed for the composite with a higher liquid‐crystalline chitin concentration (10.70 wt %); the orientation was reduced with a decreased chitin concentration at a given acrylic acid concentration. The X‐ray data for the developed composite showed a uniplanar orientation for the chitin crystallites, with its molecular long axes perpendicular to the direction of the magnetic field. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 711–714, 2003     

Development of measuring magnetic Compton profiles by grazing incidence geometry

A novel technique of measuring a magnetic Compton profile using the grazing angle geometry against a sample surface (Grazing Incidence Magnetic Compton Profile) has been successively developed. Measurements of a magnetic moment and a magnetic Compton profile are possible for a Fe 200 nm film on a thick glass substrate. The estimated thinnest limit for measurements is 100 nm for a Fe film.     

Iron speciation related to color of Jurassic sedimentary rocks in Turpan Basin, northwest China

Mesozoic-Cenozoic reddish and green beds are widely distributed in northwest China. Mössbauer spectroscopy revealed that the composition of iron species varies with color in the middle-upper Jurassic sedimentary rocks from the Turpan Basin. Three main kinds of iron species were identified: (1) ferric iron of hematite (hem-Fe³⁺), (2) paramagnetic ferric iron (para-Fe³⁺), and (3) paramagnetic ferrous iron (para-Fe²⁺). Pyrite iron (pyr-Fe²⁺) was revealed only in a few samples. In general, there is a direct correlation between rock color, iron species and total iron content, however, in detail, this relationship is more complicated. The reddish rocks contain higher contents of total iron and hem-Fe³⁺, whereas the gray rocks contain much more para-Fe²⁺. However, relatively low hematite content cannot give red color to rocks, probably due to suppression by other pigments such as organic matter in black or chlorite in green. The dark or green rocks normally contain either only paramagnetic Fe²⁺ and paramagnetic Fe³⁺ species or these two species associated with hematite Fe³⁺, but the relative content of hematite species is lower. The variations of different iron species control lithological properties such as color and also may reflect the sedimentary conditions. Moreover, iron speciation in these rocks is one of the main factors, which result the color features of rocks in remote sensing imagery.This revised version was published online in November 2005 with corrections to the Cover Date.     

Inductively-coupled plasma/atomic emission spectrometry of sulfur with a vacuum scanning spectrometer and its application to the analysis of coal liquefaction catalysts

Inductively-coupled plasma/atomic emission spectrometry with a high-resolution vacuum scanning monochromator is described for the determination of sulfur at 180.734 nm. The behavior of the signal-to-background ratio is investigated as functions of RF power, argon gas flow rate and observation height above the load coil. Under the operating conditions selected, the detection limit is 3 μg l^?1. The Se I 196.090-nm line is chosen as internal standard, because the S/Se line pair exhibited the least change with carrier gas flow rate and acid concentration of solution. Sulfur in NiMo and CoMo/ Al₂O₃ catalysts used for coal liquefaction is determined as S(II) and S(VI) species. The total amount of the species agreed well with the sulfur value obtained by the conventinal combustion method.     

Thermodynamic Insight into the Origin of a Calix[n]arene-[60]fullerene Interaction and its Application to a Porphyrin-[60]fullerene Energy Transfer System

The calixarene-fullerene interaction,which causes only a slight change in the absorptionspectra, has been substantiated by calorimetricmeasurements: the H° values arecomparable with those obtained from the associationconstants estimated by a spectroscopic method. Furthermore, we determined the association constantbetween homooxacalix[3]arene and [60]fullerenederivatives with a porphyrin moiety by fluorescencespectra.