Determination of triazine pesticides and related compounds in environmental water by liquid chromatography-mass spectrometry.

A method for the determination of 5 triazine herbicides and 12 degradation products in environmental water samples using liquid chromatography-electrospray ionization mass spectrometry (LC/ESI/MS) has been developed. The pesticides in water were extracted with two types of solid phase: a styrene-divinylbenzene copolymer and a graphitized carbon black. Desorption solvents for the extracted compounds were acetone for the styrene-divinylbenzene copolymer and methanol for the graphitized carbon black. Overall recoveries from ground water and river water ranged from 73% to 111%. The limits of detection (LODs) were 0.2 to 28 ng l(-1). This method was applied to several ground water samples.     

Interaction of two parallel plane jets of different velocities

The interaction of two parallel plane jets of different velocities is studied by flow visualization and PIV measurement to examine the influence of velocity ratio on the development ofjets in the initial region. It is found that the parallel plane jets develop toward the high velocity side and the jet width is reduced with a decrease in the jet velocity ratio. Corresponding to the variation of mean velocity field to the velocity ratio, the magnitudes of turbulence intensities, Reynolds stress and static pressure are weakened in the merging region of the jets and their peak locations of the properties are shifted to the high velocity side. These results indicate that the interaction of two parallel jets is weakened with a decrease in the velocity ratio of the jets.     

A conducting crystal based on a single-component paramagnetic molecule, [Cu(dmdt)(2)] (dmdt = dimethyltetrathiafulvalenedithiolate)

A single-component conducting molecular crystal composed of paramagnetic copper complexes, [Cu(dmdt)2]0+, was prepared. The crystal has an unprecedented three-dimensionally packed molecular arrangement and exhibits a fairly high conductivity (1 S cm-1 at room temperature). The magnetic susceptibility measurements revealed that [Cu(dmdt)2]0+ molecule keeps most of S = 1/2 spin moments. The difference of the bond lengths between [Cu(dmdt)2]0+ and [Cu(dmdt)2]2- is consistent with the result of the molecular orbital calculation.     

Excess molar heat capacities of ((<Emphasis Type="Italic">R</Emphasis>)-(+)-α-pinene+(<Emphasis Type="Italic">S</Emphasis>)-(-)- α-pinene) at temperatures between 293.15-308.15 K

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs20 New explanations are given for two types of irregular thermogravimetric (TG) data. A TG relationship between mass and temperature is derived on the basis of migration behavior of bubbles generated in bulk of sample system, and superposed on that derived on the basis of kinetics of the 4\super th\nosupersub order event, which is superposed on the experimental TG data obtained from three reference papers. This suggests that these TG data are reflecting migration of bubbles. A dependence of TG behavior on heating rate, which is contrary to usual that, is shown and is explained in terms of event-rate determination by boiling. \par }     

Thermody namic functions of 1,2-alkanediols in dilute aqueous solutions

The heat capacities of binary aqueous solutions of 1,2-ethanediol, 1,2-propanediol and 1,2-butanediol were measured at temperatures ranging from 283.15 to 338.15 K by differential scanning calorimetry. The partial molar heat capacities at the infinite dilution were then calculated for the respective alkanediols. For 1,2-ethanediol or 1,2-propanediol, the partial molar heat capacities at the infinite dilution of increased with increasing temperature. In contrast, the partial molar heat capacities of 1,2-butanediol at the infinite dilution decreased with increasing temperature. Heat capacity changes by dissolution of the alkanediols were also determined. Heat capacity changes caused by the dissolution of 1,2-ethanediol or 1,2-propanediol were increase with increasing temperature. On the other hand, heat capacity changes caused by the dissolution of 1,2-butanediol are decrease with increasing temperature. Thus our results indicated that the structural changes of water caused by the dissolution of 1,2-butanediol differed from that of the two other alkanediols. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cidep study of radical-ion pair systems: Photooxidation reactions of carbazoles by maleic anhydride in alcohol solution

Photooxidation (charge transfer) reactions of carbazole derivatives by maleic anhydride (MA) in alcoholic media are studied by a time-resolved cw-ESR (TRESR) and Fourier transform ESR (FTESR) techniques. The CIDEP spectra observed in the systems (methyl-, ethyl-, and phenyl-substituted carbazoles with MA) remarkably depend on the MA concentration. Under the high concentration conditions, an emissive TM (triplet mechanism) polarization with a slight A/E (absorption/emission) pattern of the RPM (radical pair mechanism) is observed. In the low concentration of MA, a TM-like absorptive polarization is superimposed on the A/E pattern of the RPM. Since this reaction takes place exclusively through the triplet state, this spectral phase reveals that the singlet state of the radical-ion pair (RIP) has an energy higher than that of the triplet state, in other words, the sign of the apparent exchange interaction of the present RIP systems is positive. The total absorptive polarization observed in the low concentration of MA is tentatively explained by the polarization transfer from the excited triplet state of carbazoles in thermal equilibrium.     

Enthalpies of mixing of <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">m</Emphasis>-isomers at 298.15 K

Excess enthalpies (H ^E) of 17 binary mixtures of o- and m-isomers of dichlorobenzene, difluorobenzene, methoxymethylbenzene, dimethylbenzene, dimethoxybenzene, aminofluorobenzene, fluoronitrobenzene, diethylbenzene, chlorofluorobenzene, fluoroiodobenzene, bromofluorobenzene, chloromethylbenzene, fluoromethylbenzene, bromomethylbenzene, iodomethylbenzene, fluoromethoxybenzene, dibromobenzene at 298.15 K were measured. All excess enthalpies measured were very small, and those of o-+m-isomers of aminofluorobenzene, dibromobenzene and iodomethylbenzene were negative but 14 other binary mixtures of isomers were positive over the whole range of mole fractions. H ^E of o-+m-isomers of dimethoxybenzene showed the largest enthalpic instability and those of aminofluorobenzene showed the largest enthalpic stability. There was a correlation between dipole–dipole interaction, dipole–induced dipole interaction or entropies of vaporization and excess partial molar enthalpies at infinite dilution.