Trinucleon cluster structure at high-excitation energies in A=6 nuclei

Trinucleon molecular structures in ⁶He and ⁶Be were investigated by using the ⁶Li(⁷Li, ⁷Be)⁶He reaction at 455 MeV and ⁶Li(³He, t)⁶Be reaction at 450 MeV, respectively. Binary decays into t + t from a broad state at E _x =18.0±1.0 MeV in ⁶He and into ³He + ³He from one at E _x =18.0±1.2 MeV in ⁶Be, respectively, were observed by measuring trinucleon cluster decays in coincidence with reaction particles. The branching ratios for binary decay were estimated to be about 0.7 for ⁶He and ⁶Be. These large branching ratios show that a trinucleon cluster state exists as an isobaric partner around E _x =18 MeV in ⁶He and ⁶Be.     

Design and synthesis of labeling reagents (MS probes) for highly sensitive electrospray ionization mass spectrometry and their application to the detection of carbonyl, alcohol, carboxylic acid and primary amine samples.

Novel labeling reagents, called MS probes, which possess a positively charged quaternary amine moiety and can transform a neutral analyte into a charged compound by simply mixing with the analyte and allowing the mixture to stand from several minutes to 30 min at room temperature or while heating to 50 degrees C, were designed and synthesized for the highly sensitive detection of carbonyl, alcohol, carboxylic acid and primary amine samples by electrospray ionization mass spectrometry (ESI-MS). The positively charged products can be detected with high sensitivity in an ESI-MS system, which is the most popular liquid MS instrument. All of the labeled products showed a remarkably large increase in the molecular-ion peak abundance detection sensitivity of over 500-fold at picomolar concentration levels compared to that of unlabeled analytes in an ESI-MS system. These MS probes, used together with liquid MS detection, are widely applicable as a convenient method for the highly sensitive detection of less than picomolar levels of analytes, and therefore greatly enhance the power of ESI-MS analysis.     

Generalized binomial and negative binomial distributions of order<Emphasis Type="Italic">k</Emphasis> by the<Emphasis Type="Italic">l</Emphasis>-overlapping enumeration scheme

In this paper, we investigate the exact distribution of the waiting time for ther-th ℓ-overlapping occurrence of success-runs of a specified length in a sequence of two state Markov dependent trials. The probability generating functions are derived explicitly, and as asymptotic results, relationships of a negative binomial distribution of orderk and an extended Poisson distribution of orderk are discussed. We provide further insights into the run-related problems from the viewpoint of the ℓ-overlapping enumeration scheme. We also study the exact distribution of the number of ℓ-overlapping occurrences of success-runs in a fixed number of trials and derive the probability generating functions. The present work extends several properties of distributions of orderk and leads us a new type of geneses of the discrete distributions.     

Formulation for XPS spectral change of oxides by ion bombardment as a function of sputtering time

XPS measurement revealed that the original state of TiO₂ was changed to Ti₂O₃ and TiO by ion bombardment. TiO₂ decreased and Ti₂O₃ increased at the initial stage. TiO increased at a later stage than Ti₂O₃. Each of them saturated after enough sputtering time.A formulation was proposed in order to explain the change of XPS spectra for oxides as a function of ion sputtering time. This formulation was based on reaction equations that contain two reduction processes (from TiO₂ to Ti₂O₃ and from Ti₂O₃ to TiO), and sputtering effects. Using four fitting parameters (two reduction coefficients, sputtering yield and information depth), the present formula was fitted to the experimental results. The fitting results agree satisfactorily with the experimental results. The calculation shows that the reduction coefficient from TiO₂ to Ti₂O₃ is about ten times larger than that from Ti₂O₃ to TiO. This calculation predicts that surface composition of an oxide that is changed by ion bombardment will reach a different value depending on its bulk composition. Moreover, the present formulation can determine the chemical states of compounds changed by ion bombardment.     

High-quality hydroxyapatite coating on biocompatible materials by laser-assisted laser ablation method

A new method for high-quality hydroxyapatite (HAp) coating is developed, the laser-assisted laser ablation method. In this method, two lasers are used. One is used for ablation of a HAp target. The other, the assist laser, is used to irradiate a Ti substrate surface. The effects of the assist laser irradiation are to anneal the HAp coating and to improve its adhesive strength to the Ti substrate. The quality of the HAp coating depends on the delay time of the assist-laser irradiation. HAp coatings obtained at a delay time of 10 microseconds or more are more amorphous. It was confirmed that the amorphous part of a coating dissolves in simulated body fluid, while the crystalline part does not. The value of the Ca/P ratio in a coating obtained at a delay time of a few microseconds is close to the stoichiometric value. PACS 81.16.Mk     

Keratinized epithelial transport of beta-blocking agents. I. Relationship between physicochemical properties of drugs and the flux across rat skin and hamster cheek pouch.

The maximum fluxes (Jmax) of beta-blockers through keratinized membranes were determined in vitro and compared with their physiochemical parameters such as lipophilicity (log k'0) and melting point (mp). Rat abdominal skin and hamster cheek pouch mucosa were used as the model membranes. Propranolol, metoprolol, timolol, pindolol, nadolol and agenolol were used as beta-blockers with a variety of physicochemical characters. Linear relations of Jmax with either log k'0 or mp were observed both in intact rat skin and in intact hamster cheek pouch, suggesting that the lipophilicity and thermodynamic activity of a drug in the crystal state primarily affect the drug's permeation through these membranes. However, the slope, dJmax/d(log k'0), for cheek pouch mucosa was greater than that for rat skin, corresponding to the lack of appendigeal shunt pathways in cheek pouch. Penetration studies using the delipidized membranes and the isolated stratum corneum sheet of hamster cheek pouch mucosa clarified that the primary rate-limiting barrier function might exist in the lipid layer of the stratum corneum. Jmax values for the tape-stripped and delipidized skins correlated with both the solubilities of drugs in the vehicle and with the mp, suggesting the polar porous characteristics of both model membranes. However, a theoretical approach confirmed that the contribution of an intracellular or aqueous pore route in the intact membrane to the permeation of drugs with positive lipophilic indexes is negligible.     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.     

Strain analysis of Si by FEM and energy-filtering CBED.

Lattice strains around a platelet oxygen precipitate in Si wafer is studied by energy filtering convergent-beam electron diffraction (CBED) and calculations based on the finite element method (FEM). Local lattice strains are measured from CBD patterns obtained with a probe size less than 2 nm in a specimen thicker than 450 nm. Strains measured are compressive along a direction normal to a plate of the precipitation and tensile along a direction parallel to the plate. Two-dimensional stress fields near the precipitate are obtained with FEM computer analyses by fitting the measured strains. It appears that shear stresses are concentrated at the end of the precipitate edge and the maximum shear stress at an interface between the precipitate and the Si-matrix is 1.9 GPa. It is demonstrated that a combination of the energy filtering CBED and FEM is very useful for the study of local strains near interfaces in semiconductor devices, in particular for the study of stress fields that are too steep for application of the conventional CBED technique.     

Fragmentation in doubly charged ion mass spectra of anhydropisatin and related compounds

The doubly charged ion mass spectra of anhydropisatin, 4-methoxyanhydropisatin, 3, 8, 9-trimethoxypterocarpen and 3, 4, 8, 9-tetramethoxypterocarpen were determined, and the fragmentation was explained by assuming that the paired electrons were partially localized in the fragmentations and by comparing the spectra with that of 3-(CD₃)-anhydropisatin. Conventional mass spectra of these compounds were very simple, but the doubly charged ion spectra were sufficiently characteristic for the reliable identification.