D3h‐Symmetric Porphyrin‐Based Rigid Macrocyclic Ligands for Multicofacial Multinuclear Complexes in a One‐Nanometer‐Sized Cavity

The one‐step synthesis of D_3h‐symmetric cyclic porphyrin trimers 1 composed of three 2,2′‐[4,4′‐bis(methoxycarbonyl)]bipyridyl moieties and three porphyrinatozinc moieties was achieved from a nickel‐mediated reductive coupling of meso‐5,15‐bis(6‐chloro‐4‐methoxycarbonylpyrid‐2‐yl)porphyrinatozinc. Although cyclic trimers 1 were obtained as a mixture that included other cyclic and acyclic porphyrin oligomers, an extremely specific separation was observed only for cyclic trimers 1 when using columns of silica gel modified with pyrenylethyl, cyanopropyl, and other groups. Structural analysis of cyclic trimers 1 was carried out by means of NMR spectroscopy and X‐ray crystallography. Treatment of an η³‐allylpalladium complex with a cyclic trimer gave a tris(palladium) complex containing three η³‐allylpalladium groups inside the space, which indicated that the bipyridyl moieties inside the ring could work as bidentate metalloligands.     

Constituents of Crinoidea, 4. Isolation and structure of ceramides and glucocerebrosides from the feather star Comanthus japonica

Five ceramides, JC-1-JC-5, and four glucocerebrosides, JCer-1-JCer-4, have been isolated from their parent ceramide and glucocerebroside molecular species JC and JCer obtained from the less polar lipid fraction of the chloroform/methanol extract of the feather star Comanthus japonica. The structures of these sphingolipids have been determined on the basis of chemical and spectroscopic evidence. Reversed-phase HPLC was effective at isolating these sphingolipids, revealing very close resemblance in their structures. JC-1, JC-3, JC-4, JC-5 and JCer-2, JCer-4 are newly found ceramides and glucocerebrosides, respectively.     

Second-derivative spectrophotometric study on the interactions of chlorpromazine and triflupromazine with bovine serum albumin

The second-derivative spectra of chlorpromazine (CPZ) or triflupromazine (TFZ) in buffer solutions (pH 7.4) containing various amounts of BSA (the reference solutions contained the same amount of BSA) showed derivative isosbestic points. The residual background signals derived from incomplete suppression of BSA signals can be entirely eliminated in the second-derivative spectra and BSA has spectrophotometrically one kind of binding site for CPZ or TFZ. The fractions of the drugs bound to BSA were calculated from the derivative intensity differences (ΔD values) of CPZ or TFZ before and after the addition of BSA. Scatchard plot experiments suggested that the binding of the drugs to BSA could be explained as a partition like non-specific binding model. The association constants (K) of CPZ or TFZ with BSA were calculated from the ΔD values according to the non-specific binding model by a nonlinear least-squares method. The K values were almost constant for all of the drug concentrations studied, and good reproducibility was obtained. The fractions predicted by the K values were in good coincidence to the observed values. These results confirm the usefulness of the proposed derivative method which does not need any separation procedures.     

Evaluation of the adsorption affinity of proteins to calcium hydroxyapatites by desorption and pre-adsorption methods

The adsorption affinity of bovine serum albumin (BSA) and lysozyme (LSZ) to calcium hydroxyapatite (CaHAP) was evaluated by desorption and two step adsorption methods. These experiments were carried out at 15°C in a 1×10⁻⁴ mol dm⁻³ KCl solution of pH 6.0. BSA molecules were scarcely desorbed, exhibiting an irreversible adsorption of BSA, though LSZ slightly desorbed. This result supports our previous findings that LSZ adsorbs weakly onto phosphate ions exposed on ac or bc faces of CaHAP while BSA adsorbs strongly onto positively charged sites on ac or bc faces of CaHAP. The amount of adsorbed LSZ was markedly increased by the pre-adsorption of BSA, where LSZ was adsorbed onto BSA-covered CaHAP. On the other hand, the amount of adsorbed BSA was not changed by the pre-adsorption of LSZ. In both pre-adsorption systems it was confirmed by an HPLC method that no protein molecule pre-adsorbed was desorbed after the post-adsorption procedure. Therefore, it was interpreted that the enhancement of adsorption of positively charged LSZ is induced by an electrostatic attractive force through pre-adsorption of negatively charged BSA molecules with a high coverage. However, since the coverage of LSZ onto CaHAP is considerably low, no stimulation of BSA adsorption occurred on the LSZ-covered surface. The formation of double protein adsorbed layers consisting of pre- and post-adsorbed proteins was proposed.     

Analysis of phenothiazines in human body fluids using disk solid-phase extraction and liquid chromatography

Seven phenothiazine derivatives, perazine, perphenazine, prochlorperazine, propericiazine, thioproperazine, trifluoperazine, and flupentixol, have been found to be extractable from human plasma and urine samples using disk solid-phase extraction (SPE) with an Empore C18 cartridge. Human plasma and urine (1 mL each) containing the 7 phenothiazine derivatives were mixed with 2 mL of 0.1M NaOH and 7 mL distilled water and then poured into the disk SPE cartridges. The drugs were eluted with 1 mL chloroform- acetonitrile (8 + 2) and determined by liquid chromatography with ammonium formate/formic acid-acetonitrile gradient elution. The detection was performed by ultraviolet absorption at 250 nm. The separation of the 7 phenothiazine derivatives from each other and from impurities was generally satisfactory using a SymmetryShield RP8 column (150 x 2.1 mm id, 3.5 microm particle size). The recoveries of the 7 phenothiazine derivatives spiked into plasma and urine samples were 64.0-89.9% and 65.1-92.1%, respectively. Regression equations for the 7 phenothiazine derivatives showed excellent linearity, with detection limits of 0.021-0.30 microg/mL for plasma and 0.017-0.30 microg/mL for urine. The within-day and day-to-day coefficients of variation for both samples were commonly below 9.0 and 14.9%, respectively.     

Preparation and characterization of carbonated barium-calcium hydroxyapatite solid solutions

Particles of carbonated barium-calcium hydroxyapatite solid solutions (BaCaHap) with different Ba/(Ba+Ca) (X(Ba)) atomic ratios were prepared by a wet method at 100 degrees C and characterized by various means. The crystal phases and structures of the products strongly depended on the composition of the starting solution, that is, the Ba/(Ba+Ca) atomic ratio ([X(Ba)]) and H3PO4 concentration ([H3PO4]) in the solution. BaCaHap with X(Ba)0.43 could be prepared at [X(Ba)]0.7 by changing [H3PO4], but could never be obtained at [X(Ba)]=0.8-0.95 regardless of [H3PO4]. The carbonated calcium hydroxyapatite particles prepared at [X(Ba)]=0 were fine and short rod-shaped particles (ca. 14x84 nm). With increasing [X(Ba)] from 0 to 0.8, the particles obtained became large spherical agglomerates. The carbonated barium hydroxyapatite particles formed at [X(Ba)]=1 were long rod-shaped agglomerates (ca. 0.2x2 microm) of fine primary particles. The amount of CO2 adsorbed irreversibly on a series of BaCaHaps showed a minimum at (Ba+Ca)/(P+C) atomic ratio of around 1.56, which agreed well with the minimum cation/P ratio obtained for the other hydroxyapatites, as already reported.     

Synthesis of (S-(−)-wybutine,the fluorescent minor base from yeast phenylalanine transfer ribonucleic acids

The Wittig reaction of 1-benzyl-7-formylwye (12) with (R)-[2-carboxy-2-[(methoxycarbonyl)amino]ethyl]triphenylphosphonium chloride (8) followed by successive methylation and reduction gave (-)-wybutine [(S)-1a].     

Synthesis and photophysical evaluations of β-fused uracil-porphyrin derivatives

New β-fused uracil-porphyrin conjugates were synthesized by the tetramerization of uracil-pyrroles under acidic conditions. Two different synthetic approaches were systematically studied in order to evaluate their efficiency, as well as the possibility to obtain a single regioisomer. Metallation effects were studied for aggregation in solution, and preliminary photophysical experiments were also performed in order to evaluate the potential of these new compounds.     

Separation and purification of 99mTc from 99Mo produced by electron linear accelerator

The medical radionuclide ⁹⁹Mo was produced by the ¹⁰⁰Mo(γ,n) reaction using bremsstrahlung photons generated by an electron linear accelerator. The amount of ⁹⁹Mo produced was compared to that predicted by calculation using the particles and heavy ion transport code system. From the ⁹⁹Mo produced, highly pure ^99mTc was separated using the so-called technetium master milker, and the chemical yield of ^99mTc was 83–99 %. The installation of a new complex using this method and the electron linear accelerator with the preferable specification was suggested, and a possibility to supply the demand of ^99mTc was discussed and shown.