Subtilisin catalysis of substrate anchored in cyclodextrin

The N-benzoyl-l-tyrosine ethyl ester (BTEE) anchored in cyclodextrin (β and β-methyl CD) serves as an excellent substrate for subtilisin Carlsberg catalysis. The rate of hydrolysis was found to be approximately twofold higher than that of the methanolic substrate. The K_mapp and V_max values for the CD anchored substrates were significantly higher than the methanol-solubilized BTEE.     

Di(2-ethyl hexyl) butyramide and di(2-ethyl hexyl)isobutyramide as extractants for uranium(VI) and plutonium(IV)

The extraction of uranium(VI) and plutonium(IV) from nitric acid into n-dodecane was studied using two isomeric branched alkyl amides, di(2-ethyl hexyl) butyramide (DEHBA) and di(2-ethyl hexyl) isobutyramide (DEHIBA). The extraction ratios of Pu(IV) at relatively high acidities were higher than the corresponding values for U(VI) in the case of DEHBA. However, with DEHIBA the values for Pu(IV) were negligibly small. Pu(IV) was found to be extracted as trisolvate by DEHBA and as disolvate by DEHIBA. U(VI) was extracted by both the amides. From the study of the extraction reactions at different temperatures, it was shown that all the reactions in the present investigation were enthalpy favoured and entropy disfavoured. Separation of Pu(IV) from bulk of U(VI) was feasible. However, the purity of the separated plutonium was not satisfactory in batch extraction studies.     

Biphasic kinetic investigations on the evaluation of non-salt forming reductants for Pu(IV) stripping from tributyl phosphate and N,N-dihexyl octanamide solutions in n-dodecane

The relative stability of different oxidation states of actinide elements is influenced by the nature of complexes formed and redox equilibria in aqueous/non-aqueous solutions. The reduction/stripping studies on Pu(IV) ions from loaded organic phases of 1.1 M tributyl phosphate and of 1.1 M N,N-dihexyl octanamide in n-dodecane were studied using organic soluble tert-butyl hydroquinone (TBH) and aqueous soluble reductants like acetaldoxime (AX) and hydroxyurea (HU). These studies were carried out as a function of reductant and nitric acid concentration (0.5–4 M HNO₃) and of time. The changes in Pu oxidation states were followed by spectrophotometry for TBH and by distribution ratio values for AX and HU as reductants. Spectrophotometric investigations using TBH as reductant showed that it was desirable to strip Pu(III) formed after reduction of Pu(IV) in the organic phase, which may otherwise be reconverted to extractable Pu(IV) by in situ generated HNO₂ from oxidative degradation of TBH to tert-butyl quinone. Similarly, the biphasic reduction/stripping of Pu(IV) using AX and HU as reductant rate was affected adversely with increased aqueous phase acidity. This data will help in the accurate simulation of Pu separation processes using these reductants in mixer-settlers/pulsed columns or centrifugal contactors.     

The effect of incorporation of ferrous titanate nanoparticles in sulfonated poly(ether ether ketone)/poly (amide imide) acid-base polymer for cations exchange membrane fuel cells

Journal of Solid State Electrochemistry - The sulfonated poly(ether ether ketone) (SPEEK) is one of the most promising aromatic proton exchange polymer membranes concerning fluorinated aliphatic...     

A Factorial Design Approach for Hydrothermal Synthesis of Phase‐Pure AgInO2: A Parametric Optimization Study

Owing to a wide range of industrial applications and fundamental importance, delafossite compounds have gathered tremendous interest in research community. In this study, the formation of hexagonal nanoplates of AgInO₂ mainly dominated by (00l) facets with no metallic Ag impurity, reported using a facile hydrothermal route at 180 °C using KOH as mineralizer by adopting a factorial design approach. Rietveld analysis of the powder XRD pattern and SAED confirms the rhombohedral system of AgInO₂. FE‐SEM image shows a uniform hexagonal plate‐like morphology with an average width of about 300 nm and thickness of 70 nm. XPS and EDX analysis confirm potassium ion free AgInO₂. A specific surface area of about 48.5 m² g^?1 is arrived from N₂ adsorption studies. Temperature‐dependent AC impedance measurements revealed an activation energy of 0.24 eV/f.u. Further, TG‐DTA studies found that the compound is stable in air up to 595 °C.     

Synthesis and characterization of ZSM-8-type zeolite crystals

Procedure for hydrothermal synthesis of ZSM-8-type zeolite crystals, using TEA—OH as a template, in the system having molar composition 16.2 (Na₂O) — Al₂O₃ — 117 (SiO₂) — 4.8 (TEA)₂O — 3887 H₂O at 170 °C is described. Results of characterization of these crystals by XRD, IR, EDAX, SEM, TGA, and adsorption studies are described and discussed. X-ray diffraction studies establish that the crystals are ZSM-8-type with structure similar to that of ZSM-5-type crystals. Crystals have prismatic bipyramidal morphology with average size 18–25 microns. Degased calcined samples adsorb xylenes in the order p > m > 0. Pore length per unit cell, estimated from n-hexane adsorption studies, is 46 Å.     

Critical phenomena in FINEMET alloy

The Fe_73.5Cu₁Nb₃Si_13.5B₉ FINEMET alloy has been prepared by the rapid solidification technique. The critical behaviour of this alloy in the amorphous as well as in its nanocrystalline states has been studied near their respective Curie temperatures. From the values of the critical exponents one can conclude that the alloy behaves like a 3D Heisenberg ferromagnet in the amorphous and nanocrystalline states. But there exists a slight increase in the value of β for the alloy annealed at 823 K (the nanocrystalline state) as observed in most of the amorphous alloys.