Heart Failure and PAHs,OHPAHs, and Trace Elements Levels in Human Serum: Results from a Preliminary Pilot Study in Greek Population and the Possible Impact of Air Pollution

Cardiovascular diseases (CVDs) have been associated with environmental pollutants. The scope of this study is to assess any potential relation of polycyclic aromatic hydrocarbons (PAHs), their hydroxylated derivatives, and trace elements with heart failure via their direct determination in human serum of Greek citizens residing in different areas. Therefore, we analyzed 131 samples including cases (heart failure patients) and controls (healthy donors), and the respective demographic data were collected. Significantly higher concentrations (p < 0.05) were observed in cases’ serum regarding most of the examined PAHs and their derivatives with phenanthrene, fluorene, and fluoranthene being the most abundant (median of >50 μg L⁻¹). Among the examined trace elements, As, Cd, Cu, Hg, Ni, and Pb were measured at statistically higher concentrations (p < 0.05) in cases’ samples, with only Cr being significantly higher in controls. The potential impact of environmental factors such as smoking and area of residence has been evaluated. Specific PAHs and trace elements could be possibly related with heart failure development. Atmospheric degradation and smoking habit appeared to have a significant impact on the analytes’ serum concentrations. PCA–logistic regression analysis could possibly reveal common mechanisms among the analytes enhancing the hypothesis that they may pose a significant risk for CVD development.     

Advances in wide bandgap SiC for optoelectronics

Silicon carbide (SiC) has played a key role in power electronics thanks to its unique physical properties like wide bandgap, high breakdown field, etc. During the past decade, SiC is also becoming more and more active in optoelectronics thanks to the progress in materials growth and nanofabrication. This paper will review the advances in fluorescent SiC for white light-emitting diodes, covering the poly-crystalline doped SiC source material growth, single crystalline epitaxy growth of fluorescent SiC, and nanofabrication of SiC to enhance the extraction efficiency for fluorescent SiC based white LEDs.     

In Vivo Optical Properties of Melanocytic Skin Lesions: Common Nevi, Dysplastic Nevi and Malignant Melanoma

We present an in vivo study of the optical properties of common nevi, dysplastic nevi and malignant melanoma skin lesions in human subjects. Reflectance spectra were measured on 1379 skin lesions, in the visible and near-infrared spectral regions, using a spectral imaging system, in a clinical setting. Analysis of the data using a reflectance model revealed differences between the optical properties of melanin present in nevi and melanoma lesions. These differences, which are in agreement with our previous observations on average reflectance spectra, may be potentially useful for the noninvasive characterization of pigmented skin lesions and the early diagnosis of melanoma.     

Poly(sodium styrene sulfonate)-b-poly(methyl methacrylate) diblock copolymers through direct atom transfer radical polymerization: Influence of hydrophilic–hydrophobic balance on self-organization in aqueous solution

A series of poly(sodium styrene sulfonate)-b-poly(methyl methacrylate), PSSNa-b-PMMA, amphiphilic diblock copolymers have been synthesized through atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in N,N-dimethylformamide/water mixtures, starting from a PSSNa macroinitiator. The kinetics of the polymerization was followed by ¹H NMR, while the chemical composition of the copolymers was verified by a variety of techniques, such as ¹H NMR, FTIR and TGA. The MMA content of the copolymers ranges from 0 up to 60 mol%, while the number–average molecular weight of the PSSNa macroinitiator was 9000 g/mol. The self-association of the diblock copolymers in aqueous solution was compared to the respective behavior of similar random P(SSNa-co-MMA) copolymers through optical density measurements, pyrene fluorescence probing, dynamic light scattering and surface tension measurements. It is shown that the diblock copolymers form micellar structures in water, characterized by an increasing hydrophobic character and a decreasing size as the length of the PMMA block increases. These micelle-like structures turn from surface inactive to surface active as the length of the PMMA block increases. Moreover, contrary to the MMA-rich random copolymers, the respective diblock copolymers form water insoluble polymer/surfactant complexes with cationic surfactants such as hexadecyltrimethyl ammonium bromide (HTAB), leading to materials with antimicrobial activity.     

A novel and efficient synthesis of 3,4-dihydroxyphenylacetic ester and amide derivatives/conjugates and assessment of their antioxidant activity

Phenolic acids, a sub-class of polyphenols, are widely studied. By contrary, 3,4-dihydroxyphenylacetic acid is scarcely studied. For this purpose, a series of 3,4-dihydroxyphenylacetic acid ester and amide derivatives/conjugates were synthesised for the first time. A systematic study has been performed to quantitatively identify the functional groups present in these compounds using different techniques such as ¹H NMR, ¹³C NMR and ESI MS. The synthesised compounds were evaluated for their in vitro antioxidant activity by a DPPH radical-scavenging assay. Their physico-chemical profile is also studied using Molinspiration tool. Among all tested compounds, amidoester 36 showed the best scavenging activity possessing an EC₅₀ 17 μΜ and improved physico-chemical properties compared to the parent compound.     

The phytochemical analysis and antioxidant activity assessment of orange peel (Citrus sinensis) cultivated in Greece-Crete indicates a new commercial source of hesperidin

The flavonoid content of several methanolic extract fractions of Navel orange peel (flavedo and albedo of Citrus sinensis) cultivated in Crete (Greece) was first analysed phytochemically and then assessed for its antioxidant activity in vitro. The chemical structures of the constituents fractionated were originally determined by comparing their retention times and the obtained UV spectral data with the available bibliographic data and further verified by detailed LC-DAD-MS (ESI+) analysis. The main flavonoid groups found within the fractions examined were polymethoxylated flavones, O-glycosylated flavones, C-glycosylated flavones, O-glycosylated flavonols, O-glycosylated flavanones and phenolic acids along with their ester derivatives. In addition, the quantitative HPLC analysis confirmed that hesperidin is the major flavonoid glycoside found in the orange peel. Interestingly enough, its quantity at 48 mg/g of dry peel permits the commercial use of orange peel as a source for the production of hesperidin. The antioxidant activity of the orange peel methanolic extract fractions was evaluated by applying two complementary methodologies, DPPH(*) assay and the Co(II)/EDTA-induced luminol chemiluminescence approach. Overall, the results have shown that orange peel methanolic extracts possess moderate antioxidant activity as compared with the activity seen in tests where the corresponding aglycones, diosmetin and hesperetin were assessed in different ratios.     

Metallocene-mediated cationic polymerization of vinyl ethers: Kinetics of polymerization and synthesis and characterization of statistical copolymers

The cationic polymerization of ethyl, n-butyl and iso-butyl vinyl ether, EVE, BVE and iBVE, respectively, was efficiently conducted using bis(η⁵-cyclopentadienyl)dimethyl hafnium, Cp₂HfMe₂, or bis(η⁵-cyclopentadienyl)dimethyl zirconium, Cp₂ZrMe₂ in combination with either tris(pentafluorophenyl)borate, B(C₆F₅)₃, or tetrakis(pentafluorophenyl)borate dimethylanilinum salt, [B(C₆F₅)₄]^?[Me₂NHPh]⁺, as initiation systems. The evolution of polymer yield, molecular weight and molecular weight distribution with time was examined. In addition, the influence of the initiating system, the monomer and the reaction conditions on the control of the polymerization was studied. Furthermore, statistical copolymers of EVE with BVE were prepared employing Cp₂HfMe₂ and [B(C₆F₅)₄]^?[Me₂NHPh]⁺ as the initiation system. The reactivity ratios were estimated using both linear graphical and non-linear methods. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions and the mean sequence length, which were derived using the monomer reactivity ratios. The glass transition temperatures, Tg, of the copolymers were measured by Differential Scanning Calorimetry, DSC, and the results were compared with predictions based on several theoretical models. The kinetics of thermal decomposition of the copolymers along with the respective homopolymers was studied by thermogravimetric analysis within the framework of the Ozawa-Flynn-Wall and Kissinger methodologies.     

On the adsorption and condensed film formation of dodecyl-, tetradecyl-, hexadecyl-, and octadecyltrimethylammonium bromides at the mercury/electrolyte interface

The adsorption and condensed film formation of dodecyl (DTAB)-, tetradecyl (TTAB)-, hexadecyl (CTAB)-, and octadecyl (OTAB)-trimethylammonium bromides on the hanging mercury electrode is studied in KBr as supporting electrolyte, at various temperatures from 5 to 45 degrees C. A condensed film is formed at negative potentials and at room temperature only in the presence of CTAB. The decrease of the temperature favors the formation of the condensed film. A transition temperature is observed for the film formation. Capacity-time curves at the potentials where the film is formed show a nucleation and growth mechanism, with induction time depending not only on the final potential but also on the initial potential range, although it is in the desorption region. In this temperature range no film is observed for DTAB and TTAB. However, the film is observed for OTAB, but only at higher temperatures, and is more easily formed with increasing temperature. The film is formed in a certain potential region and the nucleation rate increases while moving toward more negative potentials. Hysteresis phenomena are observed during changes of scan direction. The capacity vs time curves for OTAB, where condensed film is formed, are treated using an Avrami plot formulation and have been explained as progressive one-dimensional nucleation with a decrease of the nucleation rate during the overall film formation. The results show a marked effect of the chain length of the alkyl chain on the film formation.     

Structure, energetics, and bonding of first row transition metal pentazolato complexes: a DFT study

Quantum chemical calculations with gradient-corrected (B3LYP) density functional theory for the mono- and bispentazolato complexes of the first row transition metals (V, Cr, Mn, Fe, Co, and Ni), the all-nitrogen counterparts of metallocenes, were performed, and their stability was investigated. All possible bonding modes (e.g. eta1, eta2, eta3, and eta5) of the pentazolato ligand to the transition metals have been examined. The transition metal pentazolato complexes are predicted to be strongly bound molecules. The computed total bond dissociation enthalpies that yield free transition metal atoms in their ground states and the free pentazolato ligands were found in the range of 122.0-201.9 (3.7-102.3) kcal mol(-1) for the bispentazolato (monopentazolato) complexes, while those yielding M2+ and anionic pentazolato ligands were found in the range of 473.2-516.7 (273.6-353.5) kcal mol(-1). The electronic ground states of azametallocenes along with their spectroscopic properties (IR, NMR, and UV-vis) obtained in a consistent manner across the first transition metal series provide means for discussion of their electronic and bonding properties, the identification of the respective azametallocenes, and future laboratory studies. Finally, exploring synthetic routes to azametallocenes it was found that a [2 + 3] cycloaddition of dinitrogen to a coordinated azide ligand with nickel(II) does not seem to provide a promising synthetic route for transition metal pentazolato complexes while the oxidative addition of phenylpentazole and fluoropentazole to Ni(0) bisphosphane complexes merits attention for the experimentalists.