电子探针定量分析的标准样品——几种多元氧化物单晶

在很高的温度和适宜的生长条件下,分别采用熔盐籽晶法和高温引上法生长了高质量的YAP、NAB、KTP、LN、BBO、SBN等多元氧化物单晶,它们具有优良的物理化学性能,严格的化学比,固定的组成与结构以及较好的化学均匀性和电子束轰击下的稳定性。广泛地用于激光和非线性光学领域。我们选用这些晶体为原材料研制电子探针定量分析的标准样品。经过测量和标定,这些单晶标样符合中华人民共和国国家标准GB 4930-85(电子探针显微分析标准样品通用技术条件)的规定。含有稀土元素的标样如NAB和YAP能发出绿色荧光,是电子显微术中理想的阴极发光材料。     

Study of Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile for odorant biosensors

To make ultrathin films for the fabrication of artificial olfactory systems, odorant biosensors, we have investigated mixed Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile. Under optimized experimental conditions (phosphate buffer solution, pH 7.5, OBP-1F concentration of 4 mg L(-1), target pressure 35 mN m(-1)), the mixed monolayer at the air/water interface is very stable and has been efficiently transferred onto gold supports, which were previously functionalized by self-assembled monolayers (SAMs) with 1-octadecanethiol (ODT). Atomic force microscopy and electrochemical impedance spectroscopy were used to characterize mixed Langmuir-Blodgett (LB) films before and after contact with a specific odorant molecule, isoamyl acetate. AFM phase images show a higher contrast after contact with the odorant molecule due to the new structure of the OBP-1F/ODA LB film. Non-Faradaic electrochemical spectroscopy (EIS) is used to quantify the effect of the odorant based on the electrical properties of the OBP-1F/ODA LB film, as its resistance strongly decreases from 1.18 MOmega (before contact) to 25 kOmega (after contact).     

Defect modes tuning of one-dimensional photonic crystals with lithium niobate and silver material defect

In this paper, a novel PCs defect mode is designed by inserting a Ag/LiNbO₃/Ag sandwich structure into periodically stacked TiO₂/MgF₂ dielectric superlattice. The band gap calculation is conducted using transfer matrix method. An emergence of defect mode around 525 nm is demonstrated. By applying an external voltage on this defect mode, remarkable wavelength tuning can be achieved. At normal incidence, a tuning bandwidth up to 70 nm is obtained by moderate change of external voltage from −250 to 250 V. This feature can be employed to fabricate practical tunable filters in visible region.     

Precisely Tuning Photothermal and Photodynamic Effects of Polymeric Nanoparticles by Controlled Copolymerization

Cancer possesses normoxic and hypoxia microenvironments with different levels of oxygen, needing different efficacies of photothermal and photodynamic therapies. It is important to precisely tune the photothermal and photodynamic effects of phototherapy nano‐agents for efficient cancer treatment. Now, a series of copolymeric nanoparticles (PPy‐Te NPs) were synthesized in situ by controlled oxidative copolymerization with different ratios of pyrrole to tellurophene by FeCl₃. The photothermal and photodynamic effects of semiconducting nano‐agents under the first near‐infrared (NIR) irradiation were precisely and systematically tuned upon simply varying the molar ratio of the pyrrole to tellurophene. The PPy‐Te NPs were used for cancer treatment in mice, exhibiting excellent biocompatibility and therapeutic effect. This work presents a simple method to tune photothermal and photodynamic therapies effect in semiconducting nano‐agents for cancer treatment.     

SOFA评分联合超声对脓毒症合并AKI患者的预后价值分析

本文主要探究SOFA评分联合超声对脓毒症合并急性肾损伤(AKI)患者的预后价值。选取2017年1月~2019年1月本院脓毒症合并AKI患者50例作为观察组,并分为AKI 1、2、3期,将同期入院的50例脓毒症患者作为对照组,两组患者均采用SOFA评分联合超声进行预后评估。结果发现,观察组PDU评分低于对照组(P<0.05),RI值、SOFA评分高于对照组(P<0.05);不同分期的3组间的PDU评分、SOFA评分不同,随着AKI分期的增加,PDU评分降低、SOFA评分增加(P<0.05),但3组间的RI值并无不同(P>0.05);50例脓毒症合并AKI患者发生院内死亡率为44.00%。经单因素分析发现,年龄、机械通气时间、ICU住院时间、AKI分期、脓毒症休克、SOFA评分、PDU评分为影响患者预后不佳的因素(P<0.05);AKI3期、发生脓毒性休克、SOFA评分、PDU评分是脓毒症合并AKI患者预后不佳的独立因素(P<0.05),ROC曲线下面积(AUC)越大,对预后的预测效能越好,当AUC>70.00%时具有临床价值。两者联合显著高于单独应用SOFA评分(AUC=74.28%)或PDU评分(P<0.001)。上述结果说明,脓毒症合并AKI患者采用SOFA评分联合超声用于评估患者的预后,优于单独采用SOFA评分或超声,两者联合的预测价值更大。     

有机液体化学试剂馏程测定注意事项

对有机液体化学试剂馏程测定过程中应注意的一些问题如加热源选择、蒸馏速度控制、温度计选择、蒸馏收率以及同一样品不同特性测量结果的相关性分析等进行了分析，为正确测定馏程提供经验和依据。     

Delayed Fluorescent Emission from Pyrene Doped Phenanthrene Nanoparticles Based on Triplet-triplet Energy Transfer

Doped nanoparticles were prepared from pyrene and phenanthrene using a facile reprecipitation method. The doped nanoparticles presented unique delayed fluorescent emissions of pyrene under the unprotected condition. The ratio of the intensity of delayed fluorescence (I_DF) to that of phosphorescence (I_P) is about 4:1, which almost keeps unchanged with the decrease of pyrene content at room temperature. The intensity of the delayed fluorescence emissions is dependent on the relative content of pyrene, as well as the aggregation degree of nanoparticles. The delayed emissions are contributed to efficient triplet‐triplet energy transfer from phenanthrene (donor) to pyrene (acceptor). Steady fluorescence measurement have proved that the singlet‐singlet energy transfer process was also existent dominated by the radiation energy transfer mechanism.     

On the Formation of Nanostructures from Stilbazolium-like Dyes

Nanostructures with well-defined shape and highly monodisperse size were fabricated from model stilbazolium-like dyes with specific molecular structural and conformational characteristics. With the help of absorption and fluorescence optical spectroscopy, the correlated spectroscopy (COSY) and two- dimensional nuclear Overhauser effect spectroscopy (2D NOESY) techniques, along with X-ray diffraction (XRD) measurement, distinctively different aggregation processes of the model molecules are demonstrated. For model dye molecule with linear donor–π system–acceptor (D–π–A) structure, strong D–A pair, and planar conformation, specific intermolecular interaction was identified and special crystal structures as well as spectral properties were observed. For model dye molecules bearing nonlinear D–π–A–π–D structure, weak D–A pair but actual amphiphilic characteristics, a special aggregation process was confirmed and a focused size distribution of the produced nanostructures was obtained.