Ion chromatograph with three-dimensional printed absorbance detector for indirect ultraviolet absorbance detection of phosphate in effluent and natural waters

An ion chromatography system employing a low-cost three-dimensional printed absorbance detector for indirect ultraviolet detection towards portable phosphate analysis of environmental and industrial waters has been developed. The optical detection cell was fabricated using stereolithography three-dimensional printing of nanocomposite material. Chromatographic analysis and detection of phosphate were carried out using a CS5A 4 × 250 mm analytical column with indirect ultraviolet detection using a 255 nm light-emitting diode. Isocratic elution using a 0.6 mM potassium phthalate eluent combined with 1.44 mM sodium bicarbonate was employed at a flow rate of 0.75 mL/min. A linear calibration range of 0.5 to 30 mg/L PO₄³⁻ applicable to environmental and wastewater analysis was achieved. For retention time and peak area repeatability, relative standard deviation values were 0.68 and 4.09%, respectively. Environmental and wastewater samples were analyzed with the optimized ion chromatography platform and the results were compared to values obtained by an accredited ion chromatograph. For the analysis of environmental samples, relative errors of <14 % were achieved. Recovery analysis was also carried out on both freshwater and wastewater samples and recovery results were within the acceptable range for water analysis using standard ion chromatography methods.     

A consensus procedure improving solvent accessibility prediction

Prediction methods of structural features in 1D represent a useful tool for the understanding of folding, classification, and function of proteins, and, in particular, for 3D structure prediction. Among the structural aspects characterizing a protein, solvent accessibility has received great attention in recent years. The available methods proposed for predicting accessibility have never considered the combination of the results deriving from different methods to construct a consensus prediction able to provide more reliable results. A consensus approach that increases prediction accuracy using three high-performance methods is described. The results of our method for three different protein data sets show that up to 3.0% improvement in prediction accuracy of solvent accessibility may be obtained by a consensus approach. The improvement also extends to the correlation coefficient. Application of our consensus approach to the accessibility prediction using only three prediction methods gives results better than single methods combined for consensus formation. Currently, the scarce availability of predictors with similar parameters defining solvent accessibility hinders the testing of other methods in our consensus procedure.     

A highly efficient olefin metathesis initiator: improved synthesis and reactivity studies

The synthesis of ligand 8, required for the preparation of catalyst 4c has been optimised. Ligand exchange studies indicate that biphenyl-based alkylidene 4c initiates considerably faster than its unsubstituted analogue 4a. The performance of 4c in ring-opening cross metathesis reactions involving substrates containing unprotected chelating atoms is also reported.     

Structural adaptation of the subunit interface of oligomeric thermophilic and hyperthermophilic enzymes

Enzymes from thermophilic and, particularly, from hyperthermophilic organisms are surprisingly stable. Understanding of the molecular origin of protein thermostability and thermoactivity attracted the interest of many scientist both for the perspective comprehension of the principles of protein structure and for the possible biotechnological applications through application of protein engineering. Comparative studies at sequence and structure levels were aimed at detecting significant differences of structural parameters related to protein stability between thermophilic and hyperhermophilic structures and their mesophilic homologs. Comparative studies were useful in the identification of a few recurrent themes which the evolution utilized in different combinations in different protein families. These studies were mostly carried out at the monomer level. However, maintenance of a proper quaternary structure is an essential prerequisite for a functional macromolecule. At the environmental temperatures experienced typically by hyper- and thermophiles, the subunit interactions mediated by the interface must be sufficiently stable. Our analysis was therefore aimed at the identification of the molecular strategies adopted by evolution to enhance interface thermostability of oligomeric enzymes. The variation of several structural properties related to protein stability were tested at the subunit interfaces of thermophilic and hyperthermophilic oligomers. The differences of the interface structural features observed between the hyperthermophilic and thermophilic enzymes were compared with the differences of the same properties calculated from pairwise comparisons of oligomeric mesophilic proteins contained in a reference dataset. The significance of the observed differences of structural properties was measured by a t-test. Ion pairs and hydrogen bonds do not vary significantly while hydrophobic contact area increases specially in hyperthermophilic interfaces. Interface compactness also appears to increase in the hyperthermophilic proteins. Variations of amino acid composition at the interfaces reflects the variation of the interface properties.     

Ruthenium olefin metathesis catalysts with modified styrene ethers: influence of steric and electronic effects

A series of olefin metathesis catalysts with modified isopropoxybenzylidene ligands were synthesised, and the effects of ligands on the rate of metathesis investigated. Increased steric hinderance ortho to the isopropoxy group enhanced reaction rates. In the case of N-heterocyclic carbene complexes, decreasing electron density at both the chelating oxygen atom and the RuC bond accelerated reaction rates appreciably. Catalysts containing a tricyclohexylphosphane ligand, followed the same trend with regard to benzylidene electrophilicity, while higher electron density at oxygen enhanced reaction rates.     

Stereoselective synthesis of tetralins using cationic cyclisations

Tetralins, including the terpene calamenene, were prepared by 6-endo cationic cyclisations, effected by addition of an I(I) reagent to alkenylarenes, followed by reductive deiodination. An activating group on the arene was required for efficient cationic cyclisation. Good diastereoselectivity, relative to a chiral centre in the chain linking the alkene to the arene, was observed, with Z-alkenes giving predominantly 1,4-cis disubstituted tetralins, and E-alkenes giving predominantly 1,4-trans derivatives. Analogous 6-exo cationic cyclisations proved very limited in scope.     

Indium surface segregation in InGaAs-based structures prepared by molecular beam epitaxy and atomic layer molecular beam epitaxy

We present a comparative study on In surface segregation in InGaAs/GaAs structures prepared by molecular beam epitaxy (MBE) and atomic layer MBE (ALMBE) at different growth temperatures. The effect of segregation is evaluated by the energy position of exciton transitions in pseudomorphic 10 ML thick In_xGa_1−xAs/GaAs (0.15≤x≤0.30) and in 1 ML thick InAs/GaAs quantum wells. We show that: (i) In segregation decreases with the growth temperatures and is minimized at ALMBE and MBE growth temperatures lower than 260 and 340°C, respectively, and (ii) the segregation is more effective in ALMBE structures than in the MBE counterparts. The growth conditions that have been singled out allow the preparation of structures with high photoluminescence efficiencies even at the low growth temperatures required to minimize In segregation.