一种经氟化和热处理在双壁碳纳米管上生成缺陷的方法(英文)

Nanoscale defects in the outer tube to preserve the electrical and optical features of the inner tube can be engineered to exploit the intrinsic properties of double walled carbon nanotubes (DWCNTs) for various promising applications. We demonstrated a selective way to make defects in the outer tube by the fluorination of DWCNTs followed by the thermal detachment of the F atoms at 1000 °C in argon. Fluorinated DWCNTs with different amounts of F atoms were prepared by reacting with fluorine gas at 25, 200, and 400 °C that gave the stoichiometry of CF0.20, CF0.30, and CF0.43, respectively. At the three different temperatures used, we observed preservation of the coaxial morphology in the fluorinated DWCNTs. For the DWCNTs fluorinated at 25 and 200 °C, the strong radial breathing modes (RBMs) of the inner tube and weakened RBMs of the outer tube indicated selective fluorine attachment onto the outer tube. However, the disappearance of the RBMs in the Raman spectrum of the DWCNTs fluorinated at 400 °C showed the introduction of F atoms onto both inner and outer tubes. There was no significant change in the morphology and optical properties when the DWCNTs fluorinated at 25 and 200 °C were thermally treated at 1000 °C in argon. However, in the case of the DWCNTs fluorinated at 400 °C, the recovery of strong RBMs from the inner tube and weakened RBMs from the outer tube indicated the selective introduction of substantial defects on the outer tube while preserving the original tubular shape. The thermal detachment of F atoms from fluorinated DWCNTs is an efficient way to make highly defective outer tubes for preserving the electrical conduction and optical activity of the inner tubes.     

Transparent and Conductive Polyethylene Oxide Film by the Introduction of Individualized Single‐Walled Carbon Nanotubes

It is demonstrated that an optically transparent and electrically conductive polyethylene oxide (PEO) film is fabricated by the introduction of individualized single‐walled carbon nanotubes (SWNTs). The incorporated SWNTs in the PEO film sustain their intrinsic electronic and optical properties and, in addition, the intrinsic properties of the polymer matrix are retained. The individualized SWNTs with smaller diameter provide high transmittance as well as good electrical conductivity in PEO films.

     

Convexity and all‐time C∞‐regularity of the interface in flame propagation

We consider the following one‐phase free boundary problem: Find (u, Ω) such that Ω = {u > 0} and with Q_T = ?ⁿ × (0, T). Under the condition that Ω_o is convex and log u_o is concave, we show that the convexity of Ω(t) and the concavity of log u(·, t) are preserved under the flow for 0 ≤ t ≤ T as long as ?Ω(t) and u on Ω(t) are smooth. As a consequence, we show the existence of a smooth‐up‐to‐the‐interface solution, on 0 < t < T_c, with T_c denoting the extinction time of Ω(t). We also provide a new proof of a short‐time existence with C^2,α initial data on the general domain. © 2002 John Wiley & Sons, Inc.     

Mechanical properties of carbon nanomaterials.

Carbon nanomaterials show a variety of interesting chemical and physical properties. In this Minireview we focus on the mechanical properties of carbon nanomaterials with emphasis on carbon nanotubes and their composite materials. We introduce some recently developed components made of carbon nanotube composite materials and outline their importance for applications in everyday life.     

Power concavity on nonlinear parabolic flows

Our object in this paper is to show that the concavity of the power of a solution is preserved in the parabolic p‐Laplace equation, called power concavity, and that the power is determined by the homogeneity of the parabolic operator. In the parabolic p‐Laplace equation for the density u, the concavity of u^(p?2)/p is considered, which indicates why the log‐concavity has been considered in heat flow, p = 2. In addition, the long time existence of the classical solution of the parabolic p‐Laplacian equation can be obtained if the initial smooth data has ‐concavity and a nondegenerate gradient along the initial boundary. © 2004 Wiley Periodicals, Inc.     

Synthetic fluorescent probes to apprehend calcium signalling in lipid droplet accumulation in microalgae——an updated review

Lipid bodies are dynamic organelles of photosynthetic microalgae that can be used as the third generation resources for biofuel production.Biosynthesis of lipids can be influenced by different signalling processes.Visualisation of these processes can provide useful information about the fate and associated roles of lipid molecules in different biological systems.In photosynthetic organisms,however,studies of calcium ediated lipid biosynthesis is bottlenecked due to the limitation of proper and efficient technologies,which also include visualisation techniques.Currently,most studies to visualise lipid droplets in vivo have used traditional dyes,and proper visualisation of lipid drops is hindered by dye-specific limitations.This hurdle could be overcome by using recently developed aggregation-induced emission biooprobes.This review reveals current knowledge gaps in the studies of lipid drops and calcium ions in microalgae,as calcium signaling is important secondary messenger to detect a wide variety of environmental stimuli in plant and animal cells.To obtain insight into the mechanisms of these processes,the merits and demerits of currently available visualisation techniques for lipid drops and calcium are also detailed.Finally,opportunities and possibilities are proposed to recommend further improvement of techniques for detecting the role of calcium during lipid formation in microalgae for biofuel production.     

Surface chemistry in the process of coating mesoporous SiO2 onto carbon nanotubes driven by the formation of Si-O-C bonds

The deposition of mesoporous silica (SiO(2)) on carbon nanotubes (CNTs) has opened up a wide range of assembling possibilities by exploiting the sidewall of CNTs and organosilane chemistry. The resulting systems may be suitable for applications in catalysis, energy conversion, environmental chemistry, and nanomedicine. However, to promote the condensation of silicon monomers on the nanotube without producing segregated particles, (OR)(4-x)SiO(x)(x-) units must undergo nucleophilic substitution by groups localized on the CNT sidewall during the transesterification reaction. In order to achieve this preferential attachment, we have deposited silica on oxidized carbon nanotubes (single-walled and multiwalled) in a sol-gel process that also involved the use of a soft template (cetyltrimethylammonium bromide, CTAB). In contrast to the simple approach normally used to describe the attachment of inorganic compounds on CNTs, SiO(2) nucleation on the tube is a result of nucleophilic attack mainly by hydroxyl radicals, localized in a very complex surface chemical environment, where various oxygenated groups are covalently bonded to the sidewall and carboxylated carbonaceous fragments (CCFs) are adsorbed on the tubes. Si-O-C covalent bond formation in the SiO(2)-CNT hybrids was observed even after removal of the CCFs with sodium hydroxide. By adding CTAB, and increasing the temperature, time, and initial amount of the catalyst (NH(4)OH) in the synthesis, the SiO(2) coating morphology could be changed from one of nanoparticles to mesoporous shells. Concomitantly, pore ordering was achieved by increasing the amount of CTAB. Furthermore, preferential attachment on the sidewall results mostly in CNTs with uncapped ends, having sites (carboxylic acids) that can be used for further localized reactions.     

Fabrication of Transparent,Tough, and Conductive Shape‐Memory Polyurethane Films by Incorporating a Small Amount of High‐Quality Graphene

We report a mechanically strong, electrically and thermally conductive, and optically transparent shape‐memory polyurethane composite which was fabricated by introducing a small amount (0.1 wt%) of high‐quality graphene as a filler. Geometrically large (≈4.6 μm²), but highly crystallized few‐layer graphenes, verified by Raman spectroscopy and transmission electron microscopy, were prepared by the sonication of expandable graphite in an organic solvent. Oxygen‐ containing functional groups at the edge plane of graphene were crucial for an effective stress transfer from the graphene to polyurethane. Homogeneously dispersed few‐layered graphene enabled polyurethane to have a high shape recovery force of 1.8 MPa cm⁻³. Graphene, which is intrinsically stretchable up to 10%, will enable high‐performance composites to be fabricated at relatively low cost and we thus envisage that such composites may replace carbon nanotubes for various applications in the near future.     

Mechanically Robust,Electrically Conductive Biocomposite Films Using Antimicrobial Chitosan‐Functionalized Graphenes

An effective way of covalently functionalizing graphene with a chitosan polymer via a nitrene chemistry is demonstrated. The biofunctionalized graphene is prepared by the chemical reduction of graphene oxide using a nitrene chemistry, and then covalently grafting chitosan to the graphene surface. The effectiveness of the biofunctionalized graphene as a reinforcing filler (4 wt%) in a chitosan polymer matrix is verified by the dramatic enhancement of the mechanical properties (breaking stress = 330%, Young's modulus = 243%) and the electrical conductivity (0.3 S m^?1) without much loss in the elongation‐at‐break. The reinforcing effect can be explained by both the homogeneous dispersion of graphene within the matrix and the strong bond arising from the intrinsically intimate contact between the graphene and the matrix. The high antimicrobial activity of the biofunctionalized graphene compared with graphene oxide and chemically reduced graphene may be because of the presence of chitosan polymer on the edges of the graphene. The strong, antimicrobial graphene‐filled composite film can be used for food packaging and for coating various biomedical devices, where bacterial surface colonization is undesirable.