On a category of module bundles

It is shown, that the category ℰ _A (X) ofA-bundles over a topological spaceX is an additive pseudo-Abelian category for each Waelbroeck algebraA. This research was supported by Greek State Scholarship Foundation and Estonian Science Foundation grant 6205.     

Evidences of phase separation in moisture‐cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry

The degree of phase separation in several moisture‐cured poly(urethane urea)s (PUUs) was studied by FTIR spectroscopy, wide angle X‐ray diffraction (WAXD), and temperature‐modulated differential scanning calorimetry (TMDSC). This latter technique was shown to be particularly useful in analysing the degree of phase separation in PUU polymers. Both phase mixing and phase segregation coexisted in the PUUs and the degree of phase separation increased as the urea hard segment (HS) content in the PUU increased. The maximum solubility of urea HSs into the polyol soft segments (SSs) was achieved for 50 wt % urea HS content in diol‐based PUUs, whereas for triol‐based PUUs the highest solubility between HS and SS was reached for lower urea HS amount. Finally, the higher the urea HS content the higher the extent of phase separation in the PUU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3034–3045, 2007     

100-TW femtosecond laser based on parametric amplification

In experiments on the parametrical amplification of femtosecond pulses in wide-aperture DKDP crystals, a power of more than 100 TW has been reached, which is much higher than the record level achieved in such lasers. The energy efficiency obtained for the parametric amplifier is equal to 27%. The energy of a 72-fs pulse is equal to 10 J.     

Structural phase transformations and physical properties of intercalation compounds in the Cr0.5Ti(Se1−x Tex)2 system

The atomic structure and magnetic and electric properties of the Cr_0.5TiSe₂-Cr_0.5TiTe₂ system of intercalated phases were studied in detail by gradually replacing selenium by tellurium. It was revealed that this replacement changes the crystalline structure from monoclinic in the initial compounds to hexagonal in the compounds containing various types of chalcogen atoms; this is accompanied by disordering of chromium atoms in the van der Waals gaps. The electrical resistance and magnetic characteristics vary nonmonotonically on replacement of selenium by tellurium, which is associated with a change in the degree of atomic disordering during the transition from Cr_0.5TiSe₂ to Cr_0.5TiTe₂.     

Mössbauer studies of the re-entrant spin-glass behaviour of Fe–Al alloys

Fe–Al alloys around the concentration of 30 at. % Al present re-entrant spin-glass behaviour at low temperatures. This behaviour is not completely understood and Mössbauer spectroscopy, combined with other experimental techniques, is useful to describe and explain this behaviour. Results show that the Mössbauer spectra coincide with the magnetic behaviour showed in literature and they can be explained as a magnetic cluster system whose magnetic clusters are getting smaller when the temperature is decreasing. When the temperature is reaching to the spin-glass transition at 92 K the spins in the paramagnetic matrix are moving slower and below this transition the spins are completely frozen.     

A real time method for surface cleanliness measurement

The measurement of surface cleanliness is a significant problem in many industrial and technological processes. Existing methods are based on laboratory procedures, that are not performed in real time, can not be automated, and usually are restricted to a small portion of the sample. In this study we describe a new method for real time measurement of the amount of surface dirt or contamination deposited on a surface. It relies on the ablation of the surface dirt film by means of a short laser pulse, and the subsequent measurement of the emitted sound. The intensity of the sound is proportional to the amount of surface dirt and provides a direct measurement of the cleanliness of the surface. We also developed a reference sample for calibration, based on a uniform distribution of dots printed on white paper. The density and the dot size can be easily modified providing a homogeneous, uniform and reproducible standard for the measurement. Based on this method, we designed, developed and patented the first industrial instrument for on-line determination of the degree of cleanliness of manufactured cold rolled steel plate bobbins. PACS 79.20.D; 81.70.C; 42.62.     

Advances in constant-velocity Mössbauer instrumentation

A prototype of a programmable constant-velocity scaler is presented. This instrument allows the acquisition of partial Mössbauer spectra in selected energy regions using standard drivers and transducers. It can be fully operated by a remote application, thus data acquisition can be automated. The instrument consists of a programmable counter and a constant-velocity reference. The reference waveform generator is amplitude modulated with 13-bit resolution, and is programmable in a wide range of frequencies and waveforms in order to optimize the performance of the transducer. The counter is compatible with most standard SCA, and is configured as a rate-meter that provides counts per selectable time slice at the programmed velocity. As a demonstration of the instrument applications, a partial Mössbauer spectrum of a natural iron foil was taken. Only positive energies were studied in 512 channels, accumulating 20 s per channel. A line width of 0.20 mm/s was achieved, performing with an efficiency of 80%.     

TDPAC study in ZnTiF6·6H2O between room temperature and 1273 K

Using the time differential perturbed angular correlation technique, the hyperfine interactions as titanium sites in ZnTiF6·6H₂O and its decomposition products were determined between room temperature (300 K) and 1273 K. The different steps in the decomposition pattern were identified and a simple model is given for it.     

Young's inequality in trace-class operators

 If a and b are trace-class operators, and if u is a partial isometry, then , where ∥⋅∥₁ denotes the norm in the trace class. The present paper characterises the cases of equality in this Young inequality, and the characterisation is examined in the context of both the operator and the Hilbert–Schmidt forms of Young's inequality. Received: 20 December 2001 / Revised version: 11 July 2002 / Published online: 10 February 2003 Mathematics Subject Classification (2000): 47A63, 15A60     

Estimates of the rate of convergence of a dynamic reconstruction algorithm under incomplete information about the phase state

In this paper, we study a dynamic reconstruction algorithm which reconstructs the unknown unbounded input and all unobservable phase coordinates from the results of measurements of part of the coordinates. An upper and a lower bound for the accuracy of the reconstruction is obtained. We determine the class of inputs for which the upper bound is uniform. We give a condition for optimally matching the algorithm parameters, ensuring the highest order of the upper bound and equating the orders of the upper and lower bounds. Thus, we establish the sharpness of the upper bound.