Preparation of hydrophobic and conductive cotton fabrics using multi-wall carbon nanotubes by the sol–gel method

Journal of Sol-Gel Science and Technology - In this paper, a simple method is presented for making a conductive and hydrophobic cotton fabric using a multi-walled carbon nanotube (MWCNT). The...     

Kinetic study of the oxidation of ethanol by 3,4-lutidine chromium(VI) peroxide in dichloromethane solution

The oxidation kinetics of ethanol with 3,4-lutindine chromium(VI) peroxide (LCP) were investigated by monitoring the absorbance change at 565 nm in dichloromethane solution. The reaction had a first-order dependence on oxidant and a fractional (one half) dependence on reactant. The stoichiometric ratio between LCP and ethanol was 1 : 2. The activation parameters were determined from temperature dependence of the reaction rate. It was found that the cleavage of the peroxide groups of LCP is primarily responsible for the oxidant of ethanol to acetaldehyde. Based on the kinetic results obtained (including deuterium isotope effect) a plausible mechanism is proposed. © 1994 John Wiley & Sons, Inc.     

Heteropoly acids, their salts and polyoxometalates as heterogenous, efficient and eco-friendly catalysts in organic reactions: Some recent advances

In this review article, some recent advances of applying heteropoly acids and polyoxometalates as heterogeneous, reusable and eco-friendly catalysts in organic synthesis are discussed.     

Flow injection chemiluminescence determination of hydrazine by oxidation with chlorinated isocyanurates

A rapid and sensitive flow injection chemiluminescence (CL) method is described for the determination of hydrazine based on the CL generated during its reaction with either sodium dichloroisocyanurate (SDCC) or trichloroisocyanuric acid (TCCA) in alkaline medium. The emission intensity is greatly enhanced if dichlorofluorescein (DCF) as sensitizer is present in the reaction medium. The presence of citrate prevents the precipitation of some cations in the reaction medium and also causes an enhancement in emission intensity. The effect of analytical and flow injection variables on these CL systems and determination of hydrazine are discussed. The optimum parameters for the determination of hydrazine were studied and were found to be the following: SDCC and TCCA both 1x10(-3) M; NaOH, 2x10(-1) M; DCF, 5x10(-6) M; citrate, 1x10(-3) M and flow rate, 3.8 ml min(-1). The optimized method yielded 3sigma detection limits of 2x10(-7) and 3x10(-7) M for hydrazine with SDCC and TCCA oxidants, respectively. The method is simple, fast, sensitive, and precise and was applied to the determination of hydrazine in water samples.     

The facile and efficient Michael addition of indoles and pyrrole to alpha,beta-unsaturated electron-deficient compounds catalyzed by aluminium dodecyl sulfate trihydrate [Al(DS)3].3H2O in water

Aluminium dodecyl sulfate trihydrate [Al(DS)3].3H2O is easily prepared and can be used as a Lewis acid surfactant catalyst in water to conduct the highly efficient Michael addition of indoles and pyrrole to alpha,beta-unsaturated electron-deficient compounds at room temperature.     

A new diphenylphosphinite ionic liquid (IL-OPPh2) as reagent and solvent for highly selective bromination, thiocyanation or isothiocyanation of alcohols and trimethylsilyl and tetrahydropyranyl ethers

A new diphenylphosphinite ionic liquid (IL-OPPh₂) is introduced. This ionic liquid is used as both a reagent and a solvent to convert alcohols and trimethylsilyl and tetrahydropyranyl (THP) ethers into their corresponding alkyl bromides, thiocyanates or isothiocyanates in the presence of Br₂ and SCN⁻ at 80 °C. In this ionic liquid, bromination and thiocyanation of alcohols occurs highly selectively in the presence of trimethylsilyl and THP-ethers and also between different classes of alcohols. The use of this ionic liquid allows easy separation of the desired products from the phosphinate by-product.     

The effect of block copolymer structure on the internalization of polymeric micelles by human breast cancer cells

The objective of this study was to assess the effect of hydrophilic/hydrophobic block chain lengths on the internalization of poly(ethylene oxide)-block-poly(varepsilon-caprolactone) (PEO-b-PCL) micelles by cancer cells. PEO-b-PCL block copolymers with varied PEO and PCL chain lengths were synthesized, assembled to polymeric micelles and loaded with a hydrophobic fluorescent probe (DiI) through a co-solvent evaporation method of physical encapsulation. The slow release of the fluorescent probe from the micellar structure was evidenced following DiI transfer to lipid vesicles. The extent of micellar uptake by cancer cells was investigated through their incubation with MCF-7 cells followed by measurement of the fluorescent emission intensity of DiI (lambda=550 nm) in separated lysed cells. Cellular internalization of polymeric micelles was confirmed by laser scanning microscopy. The mechanism of micellar uptake was investigated by pretreatment of MCF-7 cells with chlorpromazine and cytochalasin B. Encapsulation of DiI in PEO-b-PCL micelles lowered the extent and rate of hydrophobic probe internalization by cancer cells. For polymeric micelles with 5000 gmol(-1) of PCL and varied PEO molecular weights of 2000, 5000 and 13,000 gmol(-1), maximum uptake was observed at a PEO molecular weight of 5000 gmol(-1). For polymeric micelles with 5000 gmol(-1) of PEO and varied PCL molecular weights of 5000, 13,000 and 24,000 gmol(-1), maximum uptake was observed at 13,000 gmol(-1) of PCL. Chlorpromazine reduced the cellular uptake of PEO-b-PCL micelles independent from the block copolymer structure, pointing to the involvement of clathrin mediated endocytosis mechanisms in the uptake of polymeric micelles by cancer cells. Inhibition of cellular uptake of PEO-b-PCL micelles by cytochalasin B, on the other hand, was found to be dependent on the chemical structure of the core/shell forming blocks.     

Ionic Liquids Modify the Performance of Carbon Based Potentiometric Sensors

A new type of potentiometric sensor based on a recently constructed carbon ionic liquid electrode (CILE) is described. Two kinds of ionic liquids, i.e., N‐octylpyridinium hexafluorophosphate (OPFP) and 1‐butyl‐3‐methylimidazoluim hexafluorophosphate (BMFP) were tested as binder for construction of the carbon composite electrode. The characteristics of these electrodes as potentiometric sensors were evaluated and compared with those of the traditional carbon paste electrode (CPE). The results indicate that potentiometric sensors constructed with ionic liquid show an increase in performance in terms of Nernstian slope, selectivity, response time, and response stability compared to CPE.     

Dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe3O4@SiO2 nanoparticles as a novel recyclable catalyst for N‐arylation of nitrogen heterocycles and green synthesis of 5‐substituted 1H‐tetrazoles

In this study, dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe₃O₄@SiO₂ nanoparticles were prepared via a multistep‐synthesis. Then, the synthesized composite was fully characterized by various techniques such as fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), dynamic light scattering (DLS), UV‐vis spectroscopy, energy dispersive X‐ray analysis (EDX), thermogravimetric analysis (TGA) and vibration sample magnetometer (VSM). From the information gained by FE‐SEM and TEM studies it can be inferred that the particles are mostly spherical in shape and have an average size of 50 nm. Also, the amount of Cu is determined to be 0.51 mmol/g in the catalyst by inductively coupled plasma (ICP) analyzer. This magnetic nano‐compound has been successfully applied as a highly efficient, magnetically recoverable and stable catalyst for N‐arylation of nitrogen heterocycles with aryl halides (I, Br) and arylboronic acids without using external ligands or additives. The catalyst was also employed in a one‐pot, three‐component reaction for the efficient and green synthesis of 5‐substituted 1H‐tetrazoles using various aldehydes, hydroxylamine hydrochloride and sodium azide in water. The magnetic catalyst can be easily separated by an external magnet bar and is recycled seven times without significant loss of its activity.