Investigation of water absorption in clay-reinforced polypropylene nanocomposites

The behaviour of polypropylene nanocomposites containing different amounts of commercial nanoclay upon exposure to distilled water and sea water at different temperatures was investigated and compared with that of neat polypropylene. In the initial stages, the weight gain (moisture absorption) follows Fick's second law, but at longer times deviations are observed owing to physical degradation and in some cases a loss of mass. Distilled water diffuses more rapidly than sea water. As the nanoclay content increases, both the rate of moisture absorption and the maximum moisture content increase, owing to the hydrophilic nature of the nanoclay and the added compatibilizing agent. Although the moisture absorption decreases the flexural properties of both the nanocomposites and neat PP, because the unexposed (as-moulded) nanocomposites are significantly superior to the neat PP they remain so even after prolonged exposure.     

Polymorphism in 3‐acetyl‐4‐hydroxy‐2H‐chromen‐2‐one

A new polymorph (denoted polymorph II) of 3‐acetyl‐4‐hydroxy‐2H‐chromen‐2‐one, C₁₁H₈O₄, was obtained unexpectedly during an attempt to recrystallize the compound from salt–melted ice, and the structure is compared with that of the original polymorph (denoted polymorph I) [Lyssenko & Antipin (2001). Russ. Chem. Bull. 50 , 418–431]. Strong intramolecular O—H...O hydrogen bonds are observed equally in the two polymorphs [O...O = 2.4263 (13) Å in polymorph II and 2.442 (1) Å in polymorph I], with a slight delocalization of the hydroxy H atom towards the ketonic O atom in polymorph II [H...O = 1.32 (2) Å in polymorph II and 1.45 (3) Å in polymorph I]. In both crystal structures, the packing of the molecules is dominated and stabilized by weak intermolecular C—H...O hydrogen bonds. Additional π–π stacking interactions between the keto–enol hydrogen‐bonded rings stabilize polymorph I [the centres are separated by 3.28 (1) Å], while polymorph II is stabilized by interactions between α‐pyrone rings, which are parallel to one another and separated by 3.670 (5) Å.     

Minimising maximum lateness in a two-machine flowshop

The objective of this paper is to develop a branch and bound algorithm for the problem of minimising maximum lateness in a two-machine flowshop, subject to release dates and time lag constraints. The importance of this NP-hard problem is twofold, it arises as a strong relaxation of the classical permutation flowshop problem, and it generalises several well studied two-machine flowshop problems. Computational experiments performed on a large set of randomly generated problems show that our algorithm can solve to optimality large size instances.     

New Triterpenes from Gymnema sylvestre

Phytochemical investigation of the aerial parts of Gymnema sylvestre has led to the isolation of seven new triterpenes, six oleane types ( 5, 7 – 11 ) and a new lupane type ( 12 ), and of the six known analogues 1 – 4, 6 , and 13 . The structures and relative configurations of these compounds were elucidated by spectroscopic analyses, including 1D‐ and 2D‐NMR spectroscopy and mass spectrometry, and by the comparison of their NMR data with those of related compounds.     

Minimizing maximum lateness in a flow shop subject to release dates

We consider the problem of minimizing the maximum lateness in a m-machine flow shop subject to release dates. The objective of this paper is to develop a new branch-and-bound algorithm to solve exactly this strongly NP-hard problem. The proposed branch-and-bound algorithm encompasses several features including a procedure for adjusting heads and tails, heuristics, and a lower bounding procedure, which is based on the exact solution of the two-machine flow shop problem with time lags, ready times, and delivery times. Extensive computational experiments show that instances with up to 6000 operations can be solved exactly in a moderate CPU time.     

Reactive layer-by-layer deposition of poly(ethylene imine) and a precursor of TiO2: influence of the sodium chloride concentration on the film growth, interaction with hexacyanoferrate anions, and particle distribution in the film

Films prepared according to a layer-by-layer (LBL) manner find increasing importance in many applications such as coatings with dedicated optical or electronic properties, particularly when including nanomaterials. An alternative way to prepare such hybrid layer-by-layer coatings is to perform sol-gel chemistry in a layer-by-layer manner. In this article, we highlight the importance of the NaCl concentration as a parameter to control the growth as well as the properties of LBL films made from poly(ethylene imine) as the organic counterpart and titanium IV (bisammoniumlactato)dihydroxyde ([Ti(lac)(2)(OH)(2)](2-)) as the precursor of TiO(2). An increase in the sodium chloride concentration leads to the faster growth of the film and to a decrease in the number of hexacyanoferrate anions remaining in the film after a buffer rinse. This may be due to a progressive increase in the fraction of negatively charged TiO(2) as suggested by transmission electron microscopy. In the presence of 0.5 M NaCl, the fraction of TiO(2) is close to 60% in mass. As a surprising finding, the films produced from 0.15 M NaCl are not homogeneously filled with TiO(2) even if the film is produced in an LBL fashion. The increased concentration of TiO(2) at the film-solution interface could constitute a barrier for the incorporation of the negatively charged redox probe.     

One-pot deposition of palladium on hybrid TiO2 nanoparticles and catalytic applications in hydrogenation

One-pot deposition of Pd onto TiO(2) has been achieved through directly contacting palladium(II) salt with nanosized functionalized TiO(2) support initially obtained by sol-gel process using titanium isopropoxide and citric acid. Citrate groups act as functional moieties able to directly reduce the Pd salt avoiding any further reducing treatment. Various palladium salts (Na(2)PdCl(4) and Pd(NH(3))(4)Cl(2)·H(2)O) and titanium to citrate (Ti/CA) ratios (20, 50, and 100) were used in order to study the effect of the nature of the precursor and of the citrate content on the final Pd particle size and catalytic properties of the as-obtained Pd/TiO(2) systems. Characterization was performed using N(2) adsorption-desorption isotherms, ICP-AES, FTIR, XRD, XPS, and TEM. The as-obtained hybrid Pd/TiO(2) catalysts were tested in the selective hydrogenation (HYD) of an α,β-unsaturated aldehyde, i.e. cinnamaldehyde. Citrate-free Pd/TiO(2)-based catalysts present lower selectivity into saturated alcohol. However, citrate-functionalized Pd/TiO(2) catalyst seems to control the selectivity, the particle size and dispersion of Pd NPs leading to high intrinsic activity.     

New Acylated Oleanane and Lupane Triterpenes from Gymnema sylvestre

Phytochemical investigation of the aerial parts of Gymnema sylvestre led to the isolation of two known oleanane‐type triterpenes, 1 and 3 , five new acylated derivatives, 2, 4 , and 5 – 7 , and a new lupane‐type triterpene, 8 . The structures and relative configurations of these compounds were elucidated by spectroscopic analyses, including 1D‐ and 2D‐NMR spectroscopy and mass spectrometry, and by the comparison of their NMR data with those of related compounds.     

The two-machine flowshop scheduling problem with sequence-independent setup times: New lower bounding strategies

The two-machine flowshop environment with sequence-independent setup times has been intensely investigated both from theoretical and practical perspectives in the scheduling literature. Nevertheless, very scant attention has been devoted to deriving effective lower bounding strategies. In this paper, we propose new lower bounds for the total completion time minimization criterion. These bounds are based on three relaxation schemes, namely the waiting time-based relaxation scheme, the single machine-based relaxation scheme, and the Lagrangian relaxation scheme. Extensive computational study carried on instances with up to 500 jobs reveals that embedding the waiting time-based bounding strategy within the Lagrangian relaxation framework yields the best performance while requiring negligible CPU time.