Evaluating cost impacts on reverse logistics using an Economic Order Quantity (EOQ) model with environmental and social considerations

Central European Journal of Operations Research - Societal awareness and legislation changes concerning sustainability have affected how organizations generate value for stakeholders, as well as...     

Survivability in IP-over-WDM Networks: WDM Lightpath Protection versus IP LSP Protection

This article compares the performance of WDM lightpath protection and IP LSP protection schemes for IP-over-WDM networks. A mathematical formulation of the maximum throughput problem is presented and analytical expressions for recovery time are derived for both schemes. The throughputs and recovery times are analyzed and compared. Results show that the IP LSP protection scheme presents higher throughputs then WDM lightpath protection. The IP LSP protection scheme, providing individual IP LSP protection has, however, scalability problems. This scheme presents high recovery times when a failure affects many lightpaths and many hops are allowed for the primary routes of IP LSPs.     

A Hybrid Improvement Heuristic for the One-Dimensional Bin Packing Problem

We propose in this work a hybrid improvement procedure for the bin packing problem. This heuristic has several features: the use of lower bounding strategies; the generation of initial solutions by reference to the dual min-max problem; the use of load redistribution based on dominance, differencing, and unbalancing; and the inclusion of an improvement process utilizing tabu search. Encouraging results have been obtained for a very wide range of benchmark instances, illustrating the robustness of the algorithm. The hybrid improvement procedure compares favourably with all other heuristics in the literature. It improved the best known solutions for many of the benchmark instances and found the largest number of optimal solutions with respect to the other available approximate algorithms.     

Imidazol(in)ium carboxylates as N-heterocyclic carbene ligand precursors for Suzuki-Miyaura reactions

Simple catalysts formed in situ from palladium acetate and a variety of imidazolium and imidazolinium carboxylates and dithiocarboxylates have been screened in the coupling of aryl halides with trans-2-phenylvinylboronic acid. Imidazol(in)ium carboxylates show an excellent activity, which compares to that displayed by the parent imidazol(in)ium chlorides, whereas imidazol(in)ium dithiocarboxylates are poorly efficient. Interestingly, the base employed exerts a profound influence on the trans/cis stereochemistry of the coupling product.     

Mechanosynthesis of YIG and GdIG: A Structural and Mössbauer Study

We have investigated the mechanosynthesis of gadolinium and yttrium iron garnets by high-energy ball-milling of α-Fe₂O₃ and Gd₂O₃ or α-Fe₂O₃ and Y₂O₃, respectively, followed by short thermal annealings conducted at moderate temperatures. The samples were characterized by X-ray diffraction and Mössbauer spectroscopy, in order to determine the influence of the milling time and annealing conditions on the final products. For as-milled samples of each rare-earth system, the results revealed the formation of perovskite phases, in relative amounts that depend on the milling time. The formation of garnet phases was observed in as-annealed samples treated at 1000°C for 2 h or 1100°C for 3 h, i.e., at very modest annealing requirements when compared with ordinary solid-state-reaction processes performed without previous high-energy milling. Also, the occurrence was verified of a milling time for which the relative amount of garnet phases formed by annealing was maximized. This time depends on the rare-earth composing the garnet phase and on the annealing temperature.     

Study of interactions of various ionic species with solvents toward the design of receptors

In earlier studies, the interactions of isolated ionic species with various solvents were investigated using ab initio calculations. The ionic species investigated included cations (proton, hydronium, ammonium, and metal cations) and anions (single electron, hydroxide, and halide anions). However in the present study, we investigate the interactions of these ionic species with the solvent in the presence of other competing ionic species. We also elaborate on how the information obtained from these extensive studies have been employed in designing and synthesizing various kinds of novel ionophores and receptors.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

Synthesis and N.m.r. studies of bis-trisubstituted phosphine platinum(o) and palladium(o) complexes with push-pull olefins

Summary Platinum(0) and palladium(0) complexes of the type: P₂M(R₁R₂C=CR₃R₄) (P=trisubstituted phosphine; R₁, R₂, R₃ and R₄ are different groups having electron acceptor or electron donor properties; M=Pt or Pd) with so called pushpull olefins, have been prepared and characterized. In some cases unusual patterns in the n.m.r. spectra of olefinic protons were observed. The spectra were analyzed by computer simulation and general rules for ABMX patterns for this type of complexes are given.     

Direct determination of gallium on polyurethane foam by X-ray fluorescence

Gallium chloride is easily extracted from 6M HCl by comminuted polyether-type polyurethane foam. After the extraction step, the gallium absorbed by the PU foam can be quantitatively determined by X-ray fluorescence. A procedure for the direct determination of gallium absorbed by PU foam by XRFS is thus described. Gallium is determined at levels as low as 60 ng/ml (C(L)), with a calibration sensitivity of 424 cps ml/mug, within a linear range 0.1-2.30 mug/ml. The procedure investigated was successfully applied to determination of gallium in aluminum alloys, bauxite and industrial residue samples.