Stability of vinylidene chloride copolymers containing 4-vinylpyridine units

Vinylidene chloride copolymers are prominent in the barrier plastic packaging industry. These materials display excellent barrier to the transport of oxygen (and other small molecules) as well as flavor and aroma molecules. However, they suffer from a propensity to undergo degradative dehydrochlorination at process temperatures. To scavenge hydrogen chloride formed and prevent its interaction with the metallic components of process equipment, a passive base is usually included as an additive prior to processing. The base is most often an inorganic oxide or salt. These may negatively impact the properties of the polymer, particularly as a film. An organic base that could be covalently incorporated into the copolymer might display better behavior. Accordingly, a series of copolymers containing low levels of 4-vinylpyridine (0.05–3 mole%) have been prepared, characterized, and examined by thermogravimetry to assess thermal stability. In all cases, polymers containing 4-vinylpyridine units are less stable than the polymer containing none of this comonomer. Clearly, the pyridine moiety is a sufficiently strong base to promote E2 elimination of hydrogen chloride to generate dichlormethylene units in the mainchain from which thermal degradation may be initiated.     

关于五阶非线性微分方程一致耗散解的一个结果

Criteria for the existence of uniformly dissipative solutions for a certain fifth order non-linear differential equation are given by means of the frequency domain method.     

Prediction and optimization of the performance characteristics of CZTS thin film solar cell using band gap grading

The results of the numerical simulation of the performance characteristics of (Cu₂ZnSnS₄) CZTS thin film solar cell due to bandgap grading is presented in this work. The investigation of the performance of this solar cell was carried out using the Analysis of Microelectronics and Photonics software (AMPS-1D). A substrate cell structure FTO/CdS/CZTS/Mo(SLG) was used as the base model. An efficiency of 8.33% was obtained from the simulation with baseline parameters while an intentional grading of the device was carried out on the device both at the front and back interface of the absorber. Front grading was observed to degrade the device performance while significant improvement of the device performance was observed with back grading. An intentional double grading of the device further enhanced the efficiency up to 12.26%.     

Spectroscopic,conformational analysis,structural benchmarking,excited state dynamics,and the photovoltaic properties of Enalapril and Lisinopril

There have been numerous attempts to theoretically design a better photovoltaic property with much interest on how to improved absorption and emission parameters of most reactive compounds in respect to dye – sensitized solar cells (DSSCs). This is regardless of the promising futures of the photovoltaic properties. However, for such effective design, it is necessary to understand the electronic and photophysical properties of the dye systems. Herein detailed density functional theory (DFT) and time – dependent DFT (TD-DFT) investigation of the excited state characteristics and the influence of various solvents: water, acetone, ethanol and chloroform on the photophysical properties of enalapril and lisinopril were investigated along with the experimental spectral (UV–vis and FT-IR) analysis. The electronic structure calculations were conducted using the 6–311++G(d,p) basis set in combination with B3LYP, M06-2X, and ?B97XD DFT functionals for the structural benchmarking investigations of the studied compounds. Results of the excitation electronic analysis of enalapril was observed to have wavelength absorption in the order gas > chloroform > ethanol > water which correspond to 229.19, 228.81, 228.85, 229.03 nm respectively while Lisinopril have the order of chloroform > gas > water > ethanol which present ethanol have the highest transition energy. In all the studied structured, the transition assignment corresponds to π $\to$ π* all corresponding to the Frank -Condon local excitation. It can be inferred from the photovoltaic properties that among the studied compounds in four different phases enalapril have the highest oscillator strength, but the values of light-harvesting efficiency (LHE) varies and show greater stability in Lisinopril. Lisinopril was observed to have the highest value of $V_{OC}$ compared to Enalapril this further confirmed the result obtained from the frontier molecular orbitals.     

Spherical cell approach for the effective viscosity of suspensions

In the present paper, the spherical cell approach is employed for addressing the effective viscosity of suspensions of spherical particles. The proposed derivation is based on the only assumption which constitutes the essence of the spherical cell approach: a representative part of the suspension is a spherical cell which contains a particle surrounded by the continuous phase. In contrast with the previous studies on this topic, no additional assumptions are used in the present analysis. The general method of derivation and the final result, which represents the effective viscosity as a function of the solid-phase volume fraction, are compared with earlier studies where the spherical cell approach was applied for describing the effective viscosity.     

Kinetics of Phenolic Compounds Modification during Maize Flour Fermentation

This study aimed to investigate the kinetics of phenolic compound modification during the fermentation of maize flour at different times. Maize was spontaneously fermented into sourdough at varying times (24, 48, 72, 96, and 120 h) and, at each point, the pH, titratable acidity (TTA), total soluble solids (TSS), phenolic compounds (flavonoids such as apigenin, kaempferol, luteolin, quercetin, and taxifolin) and phenolic acids (caffeic, gallic, ferulic, p-coumaric, sinapic, and vanillic acids) were investigated. Three kinetic models (zero-, first-, and second-order equations) were used to determine the kinetics of phenolic modification during the fermentation. Results obtained showed that fermentation significantly reduced pH, with a corresponding increase in TTA and TSS. All the investigated flavonoids were significantly reduced after fermentation, while phenolic acids gradually increased during fermentation. Among the kinetic models adopted, first-order (R² = 0.45–0.96) and zero-order (R² = 0.20–0.82) equations best described the time-dependent modifications of free and bound flavonoids, respectively. On the other hand, first-order (R² = 0.46–0.69) and second-order (R² = 0.005–0.28) equations were best suited to explain the degradation of bound and free phenolic acids, respectively. This study shows that the modification of phenolic compounds during fermentation is compound-specific and that their rates of change may be largely dependent on their forms of existence in the fermented products.     

Synthesis,Characterization, DFT and Photocatalytic Studies of a New Pyrazine Cadmium(II) Tetrakis(4-methoxy-phenyl)-porphyrin Compound

This study describes the synthesis, theoretical investigations, and photocatalytic degradational properties of a new (pyrazine)(meso-tetrakis(4-tert-methoxyphenyl)-porphyrinato)-cadmium (II) ([Cd(TMPP)-Pyz]) complex (1). The new penta-coordinated Cd^II porphyrin complex (1) was characterized by various spectroscopic techniques, including FT-IR, NMR, UV-visible absorption, fluorescence emission, and singlet oxygen, while its molecular structure was studied using single crystal X-ray diffraction. The UV–Vis spectroscopic study highlighted the redshift of the absorption bands after the insertion of the Cd(II) metal ion into the TMPP ring. The co-coordination of the pyrazine axial ligand enhanced this effect. A fluorescence emission spectroscopic study showed a significant blueshift in the Q bands, accompanied by a decrease in the fluorescence emission intensity and quantum yields of Φ_f = 0.084, Φ_f = 0.06 and Φ_f = 0.03 for H₂-TMPP free-base porphyrin, [Cd(TMPP)] and [Cd(TMPP)(Pyz)] (1) respectively. Singlet oxygen revealed that the H₂-TMPP porphyrin produced the most efficient singlet oxygen quantum yield of (Φ_Δ = 0.73) compared to [CdTMPP] (Φ_Δ = 0.57) and [Cd(TMPP)(Pyz)] (1) (Φ_Δ = 0.13). In the crystal lattice, the [Cd(TMPP)Pyz] was stabilized through non-covalent intermolecular interactions (NCI), such as the hydrogen bonds C-H···N and C-H···Cg. Additionally, crystal explorer software was then utilized to measure the quantitative analysis of the intermolecular interactions in the unit cell of the crystal structure and established that the C-H···π interaction dominated. The Natural bond orbital (NBO) analysis revealed that each molecule is stabilized by hyperconjugation and charge delocalization. As a photocatalyst, the coordination complex 1 showed excellent photocatalytic activity toward the degradation of Levafix Blue CA reactive dye (i.e., dye photo-degradation of 80%).     

Fatty Acid Profile and Antioxidant Capacity of Dabai (Canarium odontophyllum L.): Effect of Origin and Fruit Component

In the present work, the influence of geographical location on the fatty acid profiles, antioxidant potential, as well as cytotoxicity of edible dabai fruit fractions (kernel, skin, and pulp) were analyzed. The fatty acid profiles were determined by Gas Chromatography (GC), and the antioxidant activity was quantified with free 2,2-diphenyl-1-picr/ylhdrazyl, while the cytotoxicity was assessed by the brine shrimp lethality test. The results showed that the samples from Sibu, Serian, and Kapit geographical locations had a high content of the saturated fatty acids, ranging from 46.63% to 53.31% in the three fractions. The highest mono-saturated fatty acids (MUFA) content was found in Sibu. Serian and Kapit kernel fractions MUFA, however, ranged from 21.2% to 45.91%. No fatty acid composition was detected in Bentong and Kanowit. The fatty acid composition and DPPH free radical scavenging antioxidant activity of dabai were statistically independent using a multivariate analysis in different localities in Malaysia. The skin fraction had a more appreciable antioxidant potential and toxicity level than the pulp and kernel fractions. The highest antioxidant activity (EC₅₀ 198.76 ± 1.06 µg/mL) with an LC₅₀ value of 1387.22 µg/mL was obtained from the Sibu skin fraction. Therefore, the fatty acid composition, antioxidant, as well as cytotoxicity analyses of the extracts from different localities indicated that “geographical location” remarkably influenced fatty acid composition, antioxidant activity, and toxicity.     

Urea hard segment morphology in flexible polyurethane foam

A series of flexible polyurethane slabstock foam samples were prepared with varying water content and studied using transmission electron microscopy (TEM), video-enhanced optical microscopy (VEM), and small-angle X-ray scattering (SAXS). A new TEM sample preparation technique was developed in which the foam is impregnated with water, frozen, and microtomed, and the polyether soft segment is selectively degraded in the electron beam. Structures of two size scales were detected. A texture with grains (“urea aggregates”) 50–200 nm in size was imaged using both VEM and low-magnification TEM for foams with formulations containing more than 2 pphp water. For the first time, images of urea hard segment microdomains in polyurethane foam (approximately 5 nm in size) were obtained using high-magnification TEM. A microdomain spacing of approximately 6–8 nm was estimated from the SAXS scattering profiles. Glycerol was added to one of the formulations in order to modify the urea microphase separation and to give insight into morphology development in molded polyurethane foam systems. No structure was observed in low-magnification TEM images of the glycerol-modified foam, although smaller structures (hard segments) were detected at high magnification and by SAXS. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 573–581, 1998