Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Activated carbon derived from tree bark biomass with promising material properties for supercapacitors

Journal of Solid State Electrochemistry - Activated carbon from tree bark (ACB) has been synthesized by a facile and environmentally friendly activation and carbonization process at different...     

Synthesis and molecular modeling study of Cu(Ⅱ) complexes derived from 2-(diphenylmethylene)hydrazinecarbothioamide derivatives with cholinesterase inhibitory activities

Thiosemicarbazones of 2-amino-5-chlorobenzophenone and 3-aminobenzophenone（L¹-L⁴） have been synthesized and their Cu（Ⅱ） complexes（1-4） were afforded via coordination with cupric chloride.All these compounds were characterized by UV-vis and IR spectroscopy together with CHN elemental analysis.NMR spectroscopy was also applied to characterize the ligands.In vitro chohnesterase inhibitory assays for the complexes（1-4） showed IC₅₀ values less than 10μmol/L,with complex 1 exhibiting the most activity,IC₅₀=2.15μmol/L and 2.16μmol/L for AChE and BuChE,respectively. Molecular modeling simulation revealed the binding interaction template for complex 1 with the AChE and BuChE receptors.In DPPH assay,the complexes also showed more in vitro antioxidant activities in comparison to their parent ligands.     

Preparation of polypropylene/ethylene‐propylene‐diene terpolymer/nitrile rubber ternary thermoplastics vulcanizates with good mechanical properties and oil resistance by core‐shell dynamic vulcanization

As the most successful commercialized thermoplastic vulcanizates (TPVs), polypropylene (PP)/ethylene propylene rubber (EPDM) TPVs exhibit poor oil resistance. In this work, we prepared PP/EPDM/butadiene acrylonitrile rubber (NBR) ternary TPVs with good oil resistance using core‐shell dynamic vulcanization. According to the theoretical analysis of the spreading coefficient and the transmission electron microscopy results, the rubber phases exhibited a special core‐shell structure, in which the cross‐linkedNBR‐core was encapsulated by the EPDM‐shell. The core‐shell structure effectively improved the interfacial compatibility between PP and NBR phase as the EPDM‐shell could avoid the direct contact of them, thus improving the mechanical properties of the TPVs. For example, the PP/EPDM/NBR (40/30/30) ternary TPV showed enhanced tensile strength of 12.57 MPa, compared with 10.71 MPa of PP/EPDM (40/60) TPV and 11.11 MPa of PP/NBR (40/60) TPV, respectively. Moreover, the oil resistance of the TPVs was also improved. Compared with PP/EPDM TPV, the change rates in mass, volume, tensile strength and elongation at break of PP/EPDM/NBR TPV after oil immersion decreased by 42.18%, 48.69%, 52.68% and 28.77%, respectively.     

Alkaloid extracts of Ficus species and palm oil-derived tocotrienols synergistically inhibit proliferation of human cancer cells

Tocotrienols have been reported to possess anticancer effects other than anti-inflammatory and antioxidant activities. This study explored the potential synergism of antiproliferative effects induced by individual alkaloid extracts of Ficus fistulosa, Ficus hispida and Ficus schwarzii combined with δ- and γ-tocotrienols against human brain glioblastoma (U87MG), lung adenocarcinoma (A549) and colorectal adenocarcinoma (HT-29) cells. Cell viability and morphological results demonstrated that extracts containing a mixture of alkaloids from the leaves and bark of F. schwarzii inhibited the proliferation of HT-29 cells, whereas the alkaloid extracts of F. fistulosa inhibited the proliferation of both U87MG and HT-29 cells and showed synergism in combined treatments with either δ- or γ-tocotrienol resulting in 2.2–34.7 fold of reduction in IC₅₀ values of tocotrienols. The observed apoptotic cell characteristics in conjunction with the synergistic antiproliferative effects of Ficus species-derived alkaloids and tocotrienols assuredly warrant future investigations towards the development of a value-added chemotherapeutic regimen against cancers.     

Hydrazone-based ligands for micro-solid phase extraction-high performance liquid chromatographic determination of biogenic amines in orange juice

Eight hydrazone-based ligands were synthesized, trapped in a silica sol-gel matrix, and were subsequently used in the micro-solid phase extraction (μ-SPE) of biogenic amines (BAs). The BAs investigated were tryptamine, phenylethylamine, putrescine, histamine, tyramine and spermidine. Prior to the extraction, dansyl chloride was added to the samples which were heated to 70°C for 10 min. The samples were extracted with μ-SPE, after which analytes were desorbed using acetonitrile via ultrasonication. The extracts were analysed by high performance liquid chromatography (HPLC) with ultraviolet detection. Of the eight ligands investigated as sorbents, benzophenone 2,4-dinitrophenylhydrazone was found to be the most promising. The enhanced π-π interaction between the analytes and the ligand facilitated the adsorption process. Under the most suitable extraction conditions, the method demonstrated good linearity with correlation coefficient of more than 0.985 over a concentration range of 1-50 μg L(-1). Satisfactory repeatability with relative standard deviations of 7.43-11.30% (n=3) were obtained. Detection limits ranged from 3.8 to 31.3 ng L(-1). The μ-SPE method exhibited lower recoveries (71.5-87.4%) when compared to the solid phase extraction technique (79.7-95.0%), but enrichment factors of 94-460 were obtained. The proposed μ-SPE-HPLC method was applied to the determination of BAs in orange juice purchased from local supermarkets, with satisfactory results. The orange juices were characterized by the presence of relatively high levels of putrescine (range, 550-2210 μg L(-1)) but tryptamine and phenylethylamine were not detected in any of the tested samples.     

Determination of Pesticide Residues in Fruit and Vegetables by High-Performance Liquid Chromatography–Tandem Mass Spectrometry with Multivariate Response Surface Methodology

Multivariate response surface methodology optimization using Placket–Burman and Box–Behnken designs were respectively used for the screening and optimization of significant factors for liquid chromatography–tandem mass spectrometry. Consequently, the optimized instrument successfully improved the sample preparation protocol and the method was validated. However, modified QuEChERS dispersive solid phase extraction coupled with ionic liquid-based dispersive liquid–liquid microextraction were used for the determination of multi-pesticide residues in fruit and vegetable samples. The analysed samples were jackfruit, strawberries, cucumber, pears, and carrots. The resulting linearity range (5–400?µg/kg) and regression coefficient (>0.99) results were satisfactory. The 94.2 and 95.8% accuracy (89–138%) and precision (0–25%) results were satisfactory and within the recommended ranges (≤20%) and (70–120%), respectively. The limits of detection (0.01–0.54?µg/kg) and quantitation (0.03–1.79?µg/kg) were excellent. The matrix effects (≤?87%) for all analysed samples were not significant. The estimated measurement uncertainties (≤27%) were within the acceptable range (≤50%). Justifiably, the response surface methodology optimized instrument and sample treatment techniques were reliable and convenient for multi-pesticide residue determination in various fruits and vegetables.     

Morphological and Interaction Characteristics of Surface-Active Ionic Liquids and Palmitic Acid in Mixed Monolayers

A series of water soluble, surface-active ionic liquids (SAILs), namely, 1-alkyl-3-methyl imidazolium chlorides ([C_n-mim]Cl) and their mixtures with palmitic acid (PA) are investigated in Langmuir monolayers and Langmuir–Blodgett films. It is inferred from the surface pressure-area isotherms that C₁₆-mim-IL mixes non-ideally with PA and stabilizes the binary mixed films. In addition, the residence of mim-IL at the water surface is enhanced as a function of the increasing alkyl side chain length. Generally, the compressional moduli values decrease upon increasing the content of the mim-ILs over a wide range of compositions. Furthermore, film relaxation measurements indicate that the IL component is selectively excluded from the mixed films upon achieving a certain target pressure. Brewster angle microscope images demonstrate minimal changes on the PA domains in the presence of either C₄- and C₈-mim-ILs, whereas presence of the hexadecyl counterpart results in the formation of condensed sheets. Atomic force microscopy imaging of deposited films show the formation of propeller-like aggregates when C₈- or C₁₆-mim-IL is present in the mixed films.     

Multi-pesticide Residues Determination in Samples of Fruits and Vegetables Using Chemometrics Approach to QuEChERS-dSPE Coupled with Ionic Liquid-Based DLLME and LC–MS/MS

Pesticides play vital roles in agricultural practices, but the nature and mishandling of the chemicals have led to their accumulation in moist soil, vegetables and fruits. Thus, development of efficient methods for pesticides determination is one of the most important ways to address such challenges. Multivariate response surface methodology optimisation using Placket–Burman and Box–Behnken designs were respectively used for screening and optimisation of significant factors of quick, easy, cheap, effective, rugged and safe (QuEChERS) with dispersive solid-phase extraction (SPE). Consequently, the optimised QuEChERS-dSPE technique coupled with modified ionic liquid-based (IL-based) dispersive liquid–liquid microextraction was used for sample preparation before LC–MS/MS. The developed method was validated (SANTE 11831-2017) for multi-pesticide residues determination in samples of bananas, cabbages, tomatoes, oranges and onions. The precision results were satisfactory in terms of relative standard deviation (≤?20%) as recommended. The results of accuracy for relative recoveries (82–137%) were satisfactory because 92.5% of results were within the recommended range (70–120%). The matrix effects in all the samples were very weak (less effective) (≤???80%). The linearity of the evaluated results was 5–400 µg kg^?1 and regression coefficients (R²) were?>?0.99. The resulting limits of detection and quantitation were 0.02–0.32 and 0.07–1.06 µg kg^?1, respectively, and therefore satisfactory. Certifiably, the estimated measurement uncertainties range (1–16%) was acceptable (≤?50%). Thus, the developed method could be reliable and suitable for routine determination of multiple pesticide residues in various vegetable and fruit samples.