Investigation of the species-specific degradation behaviour of methylmercury and ethylmercury under microwave irradiation

The degradation behaviour of methylmercury (MeHg) under microwave irradiation is investigated, as is the (different) degradation behaviour of ethylmercury (EtHg) under similar irradiation. A simple and highly sensitive SPME-GC-pyrolysis-AFS system was used to analyse the aqueous MeHg and EtHg standard solutions after derivatization with sodium tetraphenylborate (NaBPh₄). Samples were irradiated in a microwave digester at microwave powers ranging from 20 to 160 W for durations of 2 to 10 min. The different tolerances towards microwave treatment of the two organomercury species were evident. Practically no degradation was experienced for MeHg for up to 8 minutes of irradiation at 120 W or for up to 4 minutes at 160 W. Significant analyte loss was observed for EtHg after 2 minutes at 40 W of microwave power. Awarded a Poster Prize on the occasion of the European Winter Conference on Plasma Spectrochemistry, February 2005, Budapest, Hungary     

Characterisation of a hydraulic high-pressure sample introduction assisted flow injection-inductively coupled plasma time-of-flight mass spectrometry system and its application to the analysis of biological samples

A flow injection (FI) method was developed using hydraulic high-pressure nebulization as a sample introduction system, coupled to inductively coupled plasma time-of-flight mass spectrometer (ICP-TOFMS) for rapid and simultaneous determination of 19 elements. The operating conditions of the system (analyte flow rate, heating and cooling temperatures of the desolvation module, carrier gas flow rate) for the simultaneous determination of 19 analytes were optimised. The optimum parameters of the sample introduction system were found to be 1.4 ml min⁻¹ and 1.35 l min⁻¹ for the analyte solution and nebulizer flow rates, respectively. A compromised condition for heating and cooling stage temperatures of 170 and −5 °C was chosen. The detection limits were compared to those obtained by using ICP-TOFMS with alternative sample introduction techniques e.g. conventional nebulization, flow injection chemical hydride generation (FI-CHG) and the obtained results were comparable or better than those resulting from alternative sample introduction. Applying the optimised conditions the simultaneous determination of Ag, As, Ba, Cd, Co, Cu, Ga, In, Li, Mn, Mo, Pb, Sb, Se, Sn, Sr, Tl, V and Zn was carried out. Absolute detection limits (3σ) in the range of 2-750 pg and precision between 0.5 and 9.6% from five replicate measurements of 10 ng ml⁻¹ multielemental sample solutions were achieved by using a 200 μl sample loop. The developed method was applied for the analysis of certified reference materials of biological origin (TORT-2 “Lobster Hepatopancrease”, BCR-422 “Cod Muscle” and IAEA MA-B-3/TM “Fish Homogenate”), and the results showed good agreement with the certified values.     

In-source fragmentation and accurate mass analysis of multiclass flavonoid conjugates by electrospray ionization time-of-flight mass spectrometry

In-source collision-induced dissociation (CID) fragmentation features of multiclass flavonoid glycoconjugates were examined using liquid chromatography electrospray time-of-flight mass spectrometry. Systematic experiments were performed to search for optimal conditions for in-source fragmentation in both positive and negative ion modes. The objective of the study was to attain uniformly appropriate conditions for a wide range of analytes independently of the aglycone, the attached sugar part and the type of bond between the aglycone and the glycan moieties (O- or C-glycosides). Studied substances included representatives of flavonols, flavones, flavanones and anthocyanins and, regarding their glycan parts, mono-, di- and triglycosides with varying distribution of carbohydrate moieties (di-O-glycosides, O-diglycosides, O,C-diglycosides). The breakdown properties of the analytes along with the abundances of the characteristic diagnostic ions required for structural elucidation of complex flavonoid derivatives were evaluated. An optimized value was found for the instrument parameter (fragmentor voltage) affecting the in-source CID fragmentation of the analytes [230 V (ESI+) and 330 V (ESI-)]. Thus, appropriate performance in terms of both highly sensitive full-scan acquisition and fragmentation information was obtained for all the investigated flavonoids. In addition, singularities in the abundance of selected diagnostic ions (e.g. Y(0), Y(1) and Y*) due to variations in the interglycosidic linkage (rutinoside-neohesperidoside) in the glycan part were found and are also evaluated and discussed in detail. The combination of in-source CID fragmentation with high mass accuracy MS detection establishes a working basis for the development of versatile and useful LC-MS methods for wide-scope screening, non-targeted detection and tentative identification of flavonoid derivatives.     

Systematic bottom-up approach for flavonoid derivative screening in plant material using liquid chromatography high-resolution mass spectrometry

In this work, a systematic comprehensive screening procedure has been proposed for the detection of multiclass flavonoid derivatives by liquid chromatography high-resolution mass spectrometry (LC-HRMS). The procedure is based on the combined use of accurate mass measurements and in-source fragmentation obtained with a liquid chromatography time-of-flight mass spectrometry instrument. The method relies on automated screening of selected diagnostic ions based on an exact mass database. The included diagnostic ions represent theoretical combinations of aglycones and typical glycan part constituents of flavonoid derivatives (i.e., various saccharide units and acyl moieties). The proposed identification protocol is following a systematic evaluation of the obtained positive hits from the diagnostic ions database according to a “bottom-up” approach that is thoroughly discussed. The main benefit of the proposed bottom-up protocol resides in the fact that untargeted flavonoid derivatives can be detected and tentatively identified without the need for any preliminary knowledge on the sought compound. In addition to information on the nature of the (1) aglycone and the (2) glycan part, further indication of (3) sugar unit distribution and information on (4) the type of the glycosidic bonds can also be attained. Selected examples of plant extracts demonstrate the potential of the proposed LC-HRMS approach for the systematic screening of flavonoids. A broad variety of compounds were tentatively identified including both anthocyanins and non-anthocyanin flavonoids having various glycan moieties such as mono-, di-, and triglycosides with varying distributions and linkage types of carbohydrate moieties (O-glycosides, C-glycosides, O,C-glycosides).     

LC Simultaneous Determination of the Free Forms of B Group Vitamins and Vitamin C in Various Fortified Food Products

An LC–UV screening method for simultaneous determination of ascorbic acid (C), and the free forms of thiamine (B₁) riboflavin (B₂), niacin (B₃), pyridoxine (B₆) in enriched food products was developed and validated. The chromatographic separation was accomplished within 18 min using a gradient of water with 0.1% formic acid (pH 2.5) and methanol with 0.1% formic acid on a C₁₈ reverse phase column (5 μm, 150 × 3.2 mm) while detection was performed at two wavelengths (266 and 290 nm). Sample preparation was based on an extraction method originally developed for vitamin C. This procedure besides extracting vitamin C was extended to the extraction of the free forms of vitamins B₁, B_2, B_3, B₆ and B₉. The developed analytical method was successfully applied for the simultaneous determination of the vitamin C content along with the free vitamin B forms of three different enriched food products.