Kinetic determination of silver ion by its perturbation on Belousov-Zhabotinskii oscillating chemical reaction using potentiometric method.

Silver ion can perturb the Belousov-Zhabotinskii (B-Z) oscillating chemical reaction. Therefore, the B-Z oscillating system was applied in the determination of silver ion by using a platinum wire as an indicator electrode in the potentiometric method. The amplitude of the potentiometric oscillation increased linearly in proportion to [Ag+] in the range of 9.42 x 10(-6) M to 2.54 x 10(-4) M, with a correlation coefficient of 0.999 under the optimum conditions. The obtained LOD (2sigma) was 8.85 x 10(-6) M and the relative standard deviation (RSD) for five measurements of 1 x 10(-4) M silver ion was 5%. The influence of some potentially interference was also investigated.     

Old Reagent,New Results: Aromatization of Hantzsch 1,4-Dihydropyridines with Supported Bismuth Nitrate under Microwave Irradiation in Solventless System

Hantzsch 1,4-dihydropyriines were rapidly and efficiently oxidized using bismuth nitrate supported onto silica gel under microwave irradiation.     

An active and selective heterogeneous catalytic system for Michael addition

Potassium fluoride doped natural zeolite was found to be an efficient and selective solid base catalyst for 1,4-Michael addition. The catalyst is easily prepared and the workup procedure simplified by simple filtration.All products were obtained in high yields as well as short reaction times.     

One-Pot,Three-Component Coupling Reaction: Catalyst-Free Green Synthesis of Novel N-Heteroaryl α-Naphthylglycines

A series of novel N-heteroaryl α-arylglycines containing naphthol rings has been prepared by one-pot, three-component condensation reaction of glyoxalic acid, heteroaryl amines and naphthols in water at ambient temperature and under reflux conditions in moderate to high yields. The promising advantages such as removal of organic solvent, no need to catalyst, simplicity of the reaction procedure and easy product separation will be discussed in this article.     

Uranium recovery from UCF liquid waste by nanoporous MCM-41: breakthrough capacity and elution behavior studies

Adsorption and recovery of uranium by nanoporous MCM-41 from aqueous solutions (synthetic solution and uranium conversion facility liquid waste) were investigated by use of a fixed-bed column (1.2 cm diameter and 3.0 cm height). Adsorption was carried out at flow rates 0.2 and 0.5 mL min^?1, which correspond to retention times of 10 and 6 min. The maximum breakthrough capacity for uranium ions was achieved by use of nanoporous MCM-41 at the optimum pH of 3.6 and flow rate 0.2 mL min^?1 (61.95 μg g^?1). The Thomas and Yan models were applied to the experimental data, by use of linear regression, to determine the characteristics of the column for process design. The breakthrough curves calculated from the models were in good agreement with the experimental data. The elution behavior of uranium on nanoporous MCM-41 was studied with different eluents; the results showed that 0.1 M HCl is good eluent for uranium recovery. The regenerated column could be used in a multitude of adsorption–desorption cycles.     

A novel method for risk assessment of electrostatic sensitivity of nitroaromatics through their activation energies of thermal decomposition

This study presents a novel relationship between electric spark sensitivity of nitroaromatic energetic compounds and their activation energies of thermal decomposition. The new correlation can help to elucidate the mechanism of initiation of energetic materials by electric spark. It can be used to predict the magnitude of electric spark sensitivity of new nitroaromatics, which is difficult to measure. The methodology assumes that electric spark sensitivity of a nitroaromatic energetic compound with general formula C_aH_bN_cO_d can be expressed as a function of its activation energy of thermal decomposition as well as optimized elemental composition and the contribution of specific molecular structural parameters. The new correlation has the root mean square and the average deviations of 1.43 and 1.17 J, respectively, for 22 nitroaromatic energetic compounds with different molecular structures. The proposed new method is also tested for eight nitroaromatic energetic compounds, which have complex molecular structures, e.g., 1,3,7,9-tetranitrophenoxazine, 2,4,6-tris(2,4,6-trinitrophenyl)-1,3,5-triazine, and 1-(2,4,6-trinitrophenyl)-5,7-dinitrobenzotriazole.     

Alizarin-modified sulfonate carbon nanoparticles in vanadium sensing

The adsorption processes of alizarin onto hydrophilic carbon nanoparticles (Emperor 2000?) are investigated. The significant increase in voltammetric responses for pre-adsorbed alizarin compared with those for solution confirms high affinity of alizarin to carbon nanoparticles (possibly due to π–π stacking interaction between aromatic rings of alizarin and surface-sulfonated carbon nanoparticles). To obtain the optimum of adsorption conditions, the effects of pH, agitation rate, and adsorption time are investigated. Under square wave voltammetry conditions, the peak current for the reduction of alizarin shows a linear relationship with concentration in the range from 2.0 to 10.0 nM. The limit of detection is estimated 5.8?×?10^?9 mol L^?1. Next, alizarin is applied as a receptor for sensing of trace vanadium in acetate buffer pH 5. Linear calibration curves are obtained for vanadium in the range of 1.0?×?10^?6 to 1.0?×?10^?4 mol L^?1 and the limit of detection is estimated 9.6?×?10^?8 mol L^?1. Determination of vanadium in real samples such as sea and tap water is demonstrated.     

Copper-based metal–organic framework decorated by CuO hair-like nanostructures: Electrocatalyst for oxygen evolution reaction

We report a Cu-based metal–organic framework (MOF) decorated by CuO nanostructures as an efficient catalyst for the oxygen evolution reaction (OER). MIL-53(Cu) was synthesized by a hydrothermal approach using 1,4-bezenedicarboxylic acid as organic precursor and further annealed at 300°C to form CuO nanostructures on its surface. The produced electrocatalyst, CuO@MIL-53(Cu), was characterized using various techniques. Under alkaline conditions, the developed electrocatalyst exhibited an overpotential of 801 and 336 mV versus RHE at 10 and 1 mA cm⁻², respectively. The reproducibility of the catalytic performance was validated using several electrodes. It was confirmed that the CuO hair-like nanostructures grown on MIL-53(Cu) using thermal treatment exhibit high OER activity, good kinetics and durability. CuO@MIL-53(Cu) is an economic noble-metal-free OER electrocatalyst. It has potential for application as anode material for sustainable energy technologies like batteries, fuel cells and water electrolysis.     

Spacecraft formation flying in the port-Hamiltonian framework

The problem of controlling the relative position and velocity in multi-spacecraft formation flying in the planetary orbits is an enabling technology for current and future research. This paper proposes a family of tracking controllers for different dynamics of Spacecraft Formation Flying (SFF) in the framework of port-Hamiltonian (pH) systems through application of timed Interconnection and Damping Assignment Passivity-Based Control (IDA-PBC). The leader–multi-follower architecture is used to address this problem. In this regard, first we model the spacecraft motion in the pH framework in the Earth Centered Inertial frame and then transform it to the Hill frame which is a special local coordinate system. By this technique, we may present a unified structure which encompasses linear/nonlinear dynamics, with/without perturbation. Then, using the timed IDA-PBC method and the contraction analysis, a new method for controlling a family of SFF dynamics is developed. The numerical simulations show the efficiency of the approach in two different cases of missions.

     

Inverse Bremsstrahlung absorption coefficient in inhomogeneous plasma with nonextensive electron velocity distribution and Tsallis exponential electron density profile

Inverse bremsstrahlung (collisional) absorption of the laser beam is studied in plasma with a generalized (q-nonextensive) electron velocity distribution and some kind of generalized electron density profile. It is shown that for some values of parameters designating the q-nonextensive electron velocity distribution function and its generalized density profile, the calculated absorption coefficient reduces to the already known cases with Maxwellian velocity distribution with linear and exponential density profiles.