Separation and identification of Taxifolin 3-O-glucoside isomers from Chamaecyparis obtusa (Cupressaceae)

Taxifolin 3-O-glucoside isomers, [(2R, 3R)-, (2R, 3S)-, (2S, 3R)- and (2S, 3S)-] were isolated from leaves of Chamaecyparis obtuse (Cupressaceae). Their structures were elucidated on the basis of UV, MS, CD, 1H- and 13C-NMR spectral data, including 2D shift correlation. It was found that the compounds could be distinguished by the use of 1H- and 13C-NMR spectral data.     

Addition of hydroxide to an isoelectronic series of bis-diazineplatinum(II) complex ions

Base hydrolysis of bis-bipyridylplatinum(II) occurs via a 1:1 intermediate adduct with hydroxide ion. The equilibrium constants for this 1:1 addition of hydroxide inwater to complex ions [PtL2]2+, where L=one of theisoelectronic set 2,2-bipyridyl (bpy); 2,2- bipyrazine (bpz); 3,3-bipyridazine (bpdz) and 2,2- bipyrimidine (bpym) are respectively (as log10K at 25°C): 4.23; 4.59; 3.82; 6.14. This result is rationalized in terms of addition at the 6–position of the ligand.     

Effective PET and ICT switching of boradiazaindacene emission: a unimolecular, emission-mode, molecular half-subtractor with reconfigurable logic gates

[reaction, structure: see text] We report a unimolecular system functioning as a combinatorial logic circuit for half-subtractor. The emission characteristics can be modulated by chemical inputs, and when followed at two different wavelengths, two functionally integrated logic gates XOR and INHIBIT are obtained. Both logic gates function in the emission mode, and with very large differences in the signal intensity allowing unequivocal assignment of logic-0 and logic-1.     

Ion sensing coupled to resonance energy transfer: a highly selective and sensitive ratiometric fluorescent chemosensor for Ag(I) by a modular approach

We report a novel dimeric boradiazaindacene dye which can be converted in one step to an efficient resonance energy transfer (RET) dyad. In addition, if this modification is done with appropriate ligands, RET can be coupled to ion sensing. The utility of this approach is demonstrated in a highly selective, emission ratiometric chemosensor for Ag(I).     

New Copper（Ⅱ） and Nickel（Ⅱ） Complexes of 4-Morpholinoacetophenone Thiosemicarbazone： Structural, Electrochemical and Antimicrobial Studies

4-Morpholinoacetophenone thiosemicarbazone, MAPT, and its nickel（Ⅱ） and copper（Ⅱ） complexes have been prepared and characterized by elemental analysis, magnetic susceptibility, spectral methods （FT-IR, ^1H NMR） and cyclic voltammetry. Electrochemical behaviors of the complexes have been studied by cyclic voltammetry in DMF media showing metal centered reduction processes for both of them. The redox properties, nature of the electrode processes and the stability of the complexes were discussed. [Cu（MAPT）2]Cl2 complex shows Cu（Ⅱ）/Cu（Ⅰ） couple and quasi-reversible wave associated with the Cu（Ⅲ）/Cu（Ⅱ） process. The reduction/oxidation potential values depend on the structures of complexes. Also, the antimicrobial activities of these complexes were determined against S. aureus, E. coli and B. subtilis.     

Five new nortropane alkaloids and six new amino acids from the fruit of Morus alba LINNE growing in Turkey

Investigation of the constituents of the fruits of Morus alba LINNE (Moraceae) afforded five new nortropane alkaloids (1-5) along with nor-psi-tropine (6) and six new amino acids, morusimic acids A-F (7-12). The structures of the new compounds were determined to be 2alpha,3beta-dihydroxynortropane (1), 2beta,3beta-dihydroxynortropane (2), 2alpha,3beta,6exo-trihydroxynortropane (3), 2alpha,3beta,4alpha-rihydroxynortropane (4), 3beta,6exo-dihydroxynortropane (5), (3R)-3-hydroxy-12-[(1S,4S)-4-[(1S)-1-hydroxyethyl]-pyrrolidin-1-yll-dodecanoic acid-3-O-beta-D-glucopyranoside (7), (3R)-3-hydroxy-12-[(1S,4S)-4-[(1S)-1-hydroxyethyl]-pyrrolidin-1-yll-dodecanoic acid (8), (3R)-3-hydroxy-12-1(1R,4R,5S)-4-hydroxy-5-methyl-piperidin-1-yll-dodecanoic acid-3-O-beta-D-glucopyranoside (9), (3R)-3-hydroxy-12-[(1R,4R,5S)-4-hydroxy-5-methyl-piperidin-1-yll-dodecanoic acid (10), (3R)-3-hydroxy-12-[(1R,4R,5S)-4-hydroxy-5-hydroxymethyl-piperidin-1-yl]-dodecanoic acid-3-O-beta-D-glucopyranoside (11), and (3R)-3-hydroxy-12-[(1R,4S,5S)-4-hydroxy-5-methyl-piperidin-1-yl]-dodecanoic acid (12) on the basis of spectral and chemical data.     

The Prospect of Dimensionality in Porous Semiconductors

With the advent of silicon-based semiconductors, a plethora of previously unknown technologies became possible. The development of lightweight low-dimensional organic semiconductors followed soon after. However, the efficient charge/electron transfers enabled by the non-porous 3D structure of silicon is rather challenging to be realized by their (metal-)organic counterparts. Nevertheless, the demand for lighter, more efficient semiconductors is steadily increasing resulting in a growing interest in (metal-)organic semiconductors. These novel materials are faced with a variety of challenges originating from their chemical design, their packing and crystallinity. Although the effect of molecular design is quite well understood, the influence of dimensionality and the associated change in properties (porosity, packing, conjugation) is still an uncharted area in (metal-)organic semiconductors, yet highly important for their practical utilization. In this Minireview, an overview on the design and synthesis of porous semiconductors, with a particular emphasis on organic semiconductors, is presented and the influence of dimensionality is discussed.     

Thermal computations of temperature distribution and bulb heat transfer in an automobile headlamp

In this study, experimental and numerical analysis was performed to define thermal deformation inside the head lamp because of usage plastic materials and thermal loads. Buoyancy, radiation and conjugate effects were considered. Velocity and temperature distributions were obtained and possible hot points and condense regions can be determined. Nusselt number distribution on cylindrical bulb were computed and compared with literature. Relatively important heat transfer increase in natural convection was found.     

Three‐Dimensional Architectures Incorporating Stereoregular Donor–Acceptor Stacks

We report the synthesis of two [2]catenane‐containing struts that are composed of a tetracationic cyclophane (TC⁴⁺) encircling a 1,5‐dioxynaphthalene (DNP)‐based crown ether, which bears two terphenylene arms. The TC⁴⁺ rings comprise either 1) two bipyridinium (BIPY²⁺) units or 2) a BIPY²⁺ and a diazapyrenium (DAP²⁺) unit. These degenerate and nondegenerate catenanes were reacted in the presence of Cu(NO₃)₂?2.5 H₂O to yield Cu‐paddlewheel‐based MOF‐1050 and MOF‐1051. The solid‐state structures of these MOFs reveal that the metal clusters serve to join the heptaphenylene struts into grid‐like 2D networks. These 2D sheets are then held together by infinite donor–acceptor stacks involving the [2]catenanes to produce interpenetrated 3D architectures. As a consequence of the planar chirality associated with both the DNP and hydroquinone (HQ) units present in the crown ether, each catenane can exist as four stereoisomers. In the case of the nondegenerate (bistable) catenane, the situation is further complicated by the presence of translational isomers. Upon crystallization, however, only two of the four possible stereoisomers—namely, the enantiomeric RR and SS forms—are observed in the crystals. An additional element of co‐conformational selectivity is present in MOF‐1051 as a consequence of the substitution of one of the BIPY²⁺ units by a DAP²⁺ unit: only the translational isomer in which the DAP²⁺ unit is encircled by the crown ether is observed. The overall topologies of MOF‐1050 and MOF‐1051, and the selective formation of stereoisomers and translational isomers during the kinetically driven crystallization, provide evidence that weak noncovalent bonding interactions play a significant role in the assembly of these extended (super)structures.     

Metallo Phthalocyanines bearing 2‐Isopropyl‐6‐methylpyrimidin‐4‐yloxy Substituents: Synthesis,Characterization, Aggregation Behavior,Antioxidant and Antibacterial Activity,and Electronic Properties

A novel phthalonitrile derivative bearing 2‐isopropyl‐6‐methylpyrimidin‐4‐yloxy substituents at peripheral positions was synthesized by a nucleophilic substitution reaction. Metallophthalocyanines were obtained from the reaction of the novel phthalonitrile with metal Zn, Cu, Co, and Ni salts. The characterization of the compounds was performed using elemental analysis as well as UV/Vis, FT‐IR, and ¹H‐NMR spectroscopy. The aggregation behaviors of phthalocyanine complexes were also investigated. These metallophthalocyanines do not show any aggregation behavior between 10^–4–10^–6 M concentration range in THF. The antioxidant activities of the synthesized compounds were evaluated using three different tests: 2, 2‐diphenyl‐1‐picrylhydrazyl (DPPH) radical scavenging, metal chelating activity, and reducing power assays. All the compounds exhibited various antioxidant activities. In addition, antimicrobial activity of the compounds was tested over four gram positive and two gram negative bacteria. Moreover, the ground‐state geometries of the complexes were optimized using density functional theory (DFT) methods at B3LYP/6‐31G(d, p) level in order to obtain information about the 3D arrangements and electronic structure.