Influence of ionic liquid counterions on activity and selectivity of ethylene trimerization using chromium-based catalysts in biphasic media

In recent years ionic liquids (ILs) have attracted much interest because of their widespread use in various fields. Several trimerization and oligomerization catalysts have been evaluated in ILs with different organic–inorganic hybrid structures. High catalytic activity and selectivity, easy product separation, and recycling of the catalyst are the advantages of a biphasic catalyst system compared to the homogeneous catalysts. In this study, the influence of IL counter-anions on activity and selectivity of the ethylene trimerization catalysts based on Cr-SNS-R was investigated. All synthesized materials were characterized using Fourier-transform infrared spectroscopy, ¹H NMR, ¹³C NMR, UV–Vis. spectroscopy, thin-layer chromatography, and elemental analysis (CHNS). In ethylene trimerization reaction, the dodecyl substituent in the SNS ligand exhibited better activity and selectivity than the butyl substituent. The results revealed that the presence of BF₄⁻ as a counter-anion in the IL led to an increase in activity and selectivity compared to Br⁻ and I⁻ counter-anions. It was found that the BF₄⁻ counter-anion plays a conclusive role in the development of 1-hexene activity and selectivity to a maximum amount of 71,132 g_1-C6/(g_Cr × h) and more than 99%, respectively. Finally, the catalyst was reused thrice without losing its 1-hexene selectivity.     

All‐in‐one solid‐phase microextraction: Development of a selective solid‐phase microextraction fiber assembly for the simultaneous and efficient extraction of analytes with different polarities

In the present work, for the first time, an all‐in‐one solid‐phase microextraction technique was developed for the simultaneous and efficient extraction of analytes within a vast polarity range. A novel fiber assembly composed of two different steel components each coated with different coatings (polydimethylsiloxane and polyethylene glycol) in terms of polarity by sol–gel technology was employed for the extraction of model compounds of different polarity in a single run followed by gas chromatography with mass spectrometry. Effective parameters in the extraction step and gas chromatography with mass spectrometry analysis were optimized for all model compounds. The detection limits of the developed method for model compounds were below 0.2 ng/L. The repeatability and reproducibility of the proposed method, explained by relative standard deviation, varied between 7.22 and 9.15% and between 7.95 and 14.90 (n = 5), respectively. Results showed that, under random conditions, compared to separate extractions performed by two other differently end‐coated components that had not been assembled as the final dual fiber, as two individual fibers; simultaneous, efficient and relatively selective extraction of all model compounds was obtained in a single run by the proposed all‐in‐one technique. Finally, the optimized procedure was applied to extraction and determination of the model compounds in spiked water samples.     

The mechanical response of core-shell structures for nanoporous metallic materials

Nanoporous gold (NP-Au) exhibits microscale plasticity, but macroscopically fails in a relatively brittle manner. This current study suggests that a core-shell structure can increase both ductility and strength of NP-Au. A core Au foam structure was created using conventional dealloying methods with average ligament size of 60?nm. Nickel was then electroplated on to the NP-Au with layer thicknesses ranging from 2.5?nm to 25?nm. Nanoindentation demonstrated a significant increase in the hardness of the coated Np-Au, to about five times of that of the pure Np-Au, and a decrease in creep by increasing the thickness of the coated Ni layer. Molecular dynamics simulations of Au–Ni ligaments show the same trend of strengthening behavior with increasing Ni thickness suggesting that the strengthening mechanisms of the Np-Au are comparable to those for fcc nano ligaments. The simulations demonstrate two different strengthening mechanisms with the increased activity of the twins in plated Au–Ni ligaments, which leads to more ductile behavior, as opposing to the monolithic Au ligaments where nucleation of dislocations govern the plasticity during loading.     

Synthesis,Spectra Characterization,Electrochemical Behavior of Silyl Derivatives of Ferrocene

Ferrocenyl‐substituted silanes via the reaction between mono and dilithio‐ferrocene with trimethyl, trietheyl, vinyldimethyl or t‐butyldimethyl chlorosilanes is prepared. The electrochemical behaviors of these compounds were investigated by cyclic voltammetry. This work describes the electrochemical and electrocatalytic properties of carbon ceramic electrode (CCE) modified with ferrocene composites as a new electrocatalyst material.     

The effect of synthesis method and post-synthesis treatment on the formation of neutral Mn(II) complex into anionic zeolite structure and investigation of its catalytic activity in the epoxidation of alkenes

In this study, we improved the catalytic performance of manganese porphyrin encapsulated HY zeolite for alkene epoxidation reaction. For this purpose, Manganese tetra pyridyl porphyrin encapsulated into modified dealuminated Y zeolite (MnTPP-MDAZY) was synthesized using zeolite template synthesis method. This heterogenized catalyst was characterized by FT-IR, UV–Vis, XRD and atomic absorption spectra (AAS) technique. Catalyst loading was 0.263 mmol/g support. In this way, high catalyst loading is probably related to the decrease of the size of metalloporphyrin and the post-synthesis treatment. The latter one causes the increase of the diameter of the mesoporous structure as a result of the dealumination of zeolite with EDTA treatment. High catalyst loading efficiently enhances the epoxidation of alkenes.     

Silver‐Triggered Activity of a Heterogeneous Palladium Catalyst in Oxidative Carbonylation Reactions

A silver‐triggered heterogeneous Pd‐catalyzed oxidative carbonylation has been developed. This heterogeneous process exhibits high efficiency and good recyclability, and was utilized for the one‐pot construction of polycyclic compounds with multiple chiral centers. AgOTf was used to remove chloride ions in the heterogeneous catalyst Pd‐AmP‐CNC, thereby generating highly active Pd^II, which results in high efficiency of the heterogeneous catalytic system.     

Silver-Triggered Activity of a Heterogeneous Palladium Catalyst in Oxidative Carbonylation Reactions

A silver-triggered heterogeneous Pd-catalyzed oxidative carbonylation has been developed. This heterogeneous process exhibits high efficiency and good recyclability, and was utilized for the one-pot construction of polycyclic compounds with multiple chiral centers. AgOTf was used to remove chloride ions in the heterogeneous catalyst Pd-AmP-CNC, thereby generating highly active Pd^II, which results in high efficiency of the heterogeneous catalytic system.