In this paper, an adaptive FE analysis is presented based on error estimation, adaptive mesh refinement and data transfer for enriched plasticity continua in the modelling of strain localization. As the classical continuum models suffer from pathological mesh-dependence in the strain softening models, the governing equations are regularized by adding rotational degrees-of-freedom to the conventional degrees-of-freedom. Adaptive strategy using element elongation is applied to compute the distribution of required element size using the estimated error distribution. Once a new mesh is generated, state variables and history-dependent variables are mapped from the old finite element mesh to the new one. In order to transfer the history-dependent variables from the old to new mesh, the values of internal variables available at Gauss point are first projected at nodes of old mesh, then the values of the old nodes are transferred to the nodes of new mesh and finally, the values at Gauss points of new elements are determined with respect to nodal values of the new mesh. Finally, the efficiency of the proposed model and computational algorithms is demonstrated by several numerical examples. 相似文献
We consider the rate of convergence for a class of perturbed hemivariational inequalities in reflexive Banach Spaces. Our results can be viewed as an extension and refinement of some previous known results in this area. 相似文献
The ability of living filamentous cells of the cyanobacterium Oscillatoria homogenea to separate stable strontium and 90Sr from aqueous solution is demonstrated in this study. On a basis of filamentous cell biovolume, the removal were 43.78 nM·ml·(mm3)−1 and 3129.48 mBq·ml·(mm3)−1 after 240 hour incubation. The optimum pH for strontium uptake is 9±0.3. The increasing biovolume of the blue-green alga
elevates sorption. In the liquid culture containing 21.2 mm3·ml−1 filamentous cells and 1000 nM·ml−1 initial strontium concentration, the maximum strontium removal was 455.34 nM·ml·(mm3)−1. At 1200 Lux illumination, the maximum removal value was 58.62 nM·ml·(mm3)−1, and at the initial strontium concentration of 6590 nM·ml−1, 235.40 nM·ml·(mm3)−1 removal was observed. The experimental data fitted to Langmuir isotherm and the model parameters and correlation coefficient
(R2) were qmax = 7.143 μg·(mm3)−1, b = 0.003 and 0.99, respectively. 相似文献
In this article, the design and fabrication of a Fourier transform spectrometer, based on a thermally actuated tunable grating, are presented. Grooves of a binary grating are filled with nitrobenzene, the refractive index of which highly depends on temperature. Through the application of heat, the temperature of the nitrobenzene is changed, which in turn changes the efficiency of the grating. To measure the spectrum of a light beam, the light under inspection is first passed through the grating and the intensity of the zero order of diffraction is recorded as a function of temperature. Next, the Fourier transform of the measured data is calculated. The resolution of the spectrometer is also discussed. Finally, a micro-spectrometer that is based on a thermally actuated grating is proposed. 相似文献
In this article a novel method for the fabrication of a passive 3D mixer is presented. It has been shown that in CO2 laser ablation of Polymethyl Methacrylate (PMMA), bending and straight cone structures can be fabricated by adjusting the laser scanning parameters. The effect of the bending cones in the flow direction of a fluid is discussed with computer simulation and a passive mixer based on such structures is designed. Bending and straight cones are fabricated on a PMMA substrate using CO2 laser ablation technique. The structure is molded with PDMS to make two half-channels with bending and straight cones extending out of the surface. Two PDMS structures are stacked on top of each other with a certain displacement to fabricate the mixer. 相似文献
Fluid atomic behavior is an important factor for industrial applications. Computer simulations based on simple models predict Poiseuille flow for these atomic structures with the presence of external force. In this work, we describe the dynamical properties of Ar and O2 flows with precise atomic arrangement via dissipative particle dynamics (DPD) and molecular dynamics (MD) simulation approaches. In these methods, each model is represented by using Large-scale Atomic/Molecular Massively Parallel Simulator package. Simulation results show that maximum rate for velocity of Ar flow in platinum and copper microchannels is 0.100 (unit less)/0.091 Å ps?1 and 0.121 (unit less)/0.105 Å ps?1 by using DPD/MD approach. This atomic parameter changes to 0.111 (unit less)/0.102 Å ps?1 and 0.125 (unit less)/0.108 Å ps?1 for O2 fluid with mentioned approaches. By decreasing the microchannel size, the maximum rate of velocity reaches to 0.101 (unit less)/0.099 Å ps?1 and maximum temperature rate decreases to 485 (unit less)/440 K with DPD/MD approaches. These calculated parameters can be used in industrial application designing for some processes such as heat transfer in structures. It was seen that the developed DPD approach was able to simulate the fluid flow and heat transfer of various types of fluids at micro- and nanoscales with suitable accuracy versus MD.
Pyrolysis is a commonly used method for the recovery of used lubricating oil (ULO), which should be kinetically improved by a catalyst, due to its high level of energy consumption. In this research, the catalytic effects of carbon nanotube (CNT) and graphene nanoplatelets on the pyrolysis of ULO were studied through thermogravimetric analysis. First, the kinetic parameters of ULO pyrolysis including activation energy were calculated to be 170.12 and 167.01 kJ mol?1 by FWO and KAS methods, respectively. Then, the catalytic effects of CNT and graphene nanoplatelets on pyrolysis kinetics were studied. While CNT had a negligible effect on the pyrolysis process, graphene nanoplatelets significantly reduced the temperature of maximum conversion during pyrolysis from 400 to 350 °C, due to high thermal conductivity and homogenous heat transfer in the pyrolysis process. On the other hand, graphene nanoplatelets maximized the rate of conversion of highly volatile components at lower temperatures (<?100 °C), which was mainly due to the high affinity of these components toward graphene nanoplatelets and also the effect of nanoplatelets’ edges which have free tails and can bond with other molecules. Moreover, graphene nanoplatelets decreased the activation energy of the conversion to 154.48 and 152.13 kJ mol?1 by FWO and KAS methods, respectively.