Nonlinear signal-processing model for signal generation in multilevel two-dimensional optical storage

A two-dimensional optical storage (TwoDOS) format with binary modulation is being developed in which channel bits are arranged on a two-dimensional hexagonal lattice [W. M. J. Coene, in Optical Data Storage, Vol. 88 of OSA Trends in Optics and Photonics Series (Optical Society of America, Washington, D.C., 2003), pp. 90-92]. The aim is to increase the capacity by a factor of 2 and the data rate by a factor of 10 over third-generation Blu-ray Disc technology. Following a route similar to that used in one-dimensional conventional optical storage [Jpn. J. Appl. Phys. 42, 1074 (2003)] could lead to a further increase in capacity by the addition of another dimension to writing data, such as the use of multiple levels instead of the two levels (pit and land) used in the binary TwoDOS disk format. We present a nonlinear signal-processing model for signal waveform generation as a function of the M-ary channel symbols, as well as simulated signal readouts for multilevel TwoDOS.     

一个简单、环境友好的硅胶固载硫酸催化Biginelli反应体系(英文)

A protocol for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones and-thiones was developed by means of a three-component condensation of an aldehyde,a β-dicarbonyl compound,and urea or thiourea in acetic acid catalyzed by silica-bonded S-sulfonic acid.Compared to the classical Biginelli reaction conditions,this new protocol has the advantages of consistently excellent yields and short reaction times.After the reaction,the catalyst could be recovered easily and reused with little change in its activity.     

Thermal and Structural Behaviors of Polypropylene Nanocomposites Reinforced with Single-Walled Carbon Nanotubes by Melt Processing Method

In this work, polypropylene (PP) matrix reinforced with several single-walled carbon nanotubes (SWNTs) concentrations were prepared by a melt-mixing method. The effect of SWNTs on the thermal degradation behavior of polypropylene was studied by thermal gravimetric analysis. The results revealed that adding the SWNTs into the PP can increase the decomposition temperature. The results obtained from differential scanning calorimetry showed that incorporating SWNTs reduced the crystallinity but increased the crystallization temperature of the PP. The mechanical measurements showed that the tensile modulus of the nanocomposite was greatly enhanced to 882 MPa, compared to 485 MPa for pristine PP. For wide-angle X-ray diffraction tests, two cooling methods were used. The addition of SWNTs to the polymer in slow-cooled samples resulted in partial crystallization in the γ -form, while SWNTs had no effect in water-cooled samples, the sample crystallizing in the α -form. Scanning electron microscopy observations on the fracture surface of the nanocomposites showed the dispersion of the SWNTs in the nanocomposites.     

Effect of carbon nanotubes content on crystallization kinetics and morphology of polypropylene

Thermoplastic nanocomposites were prepared in a laboratory mixer using polypropylene (PP) and different amounts of single-walled carbon nanotubes (SWNT) in the range 0.25–2 wt%. The effect of SWNT content on the thermal and mechanical properties and also morphology of the PP/SWNT nanocomposites were studied. The results obtained from nonisothermal crystallization of PP and the nanocomposites, which were carried out using the differential scanning calorimetry technique, showed that not only the overall rate of crystallization of PP increased when SWNT was added to the polymer but also the rate of nucleation was higher and the crystallite size distribution was more uniform for the nanocomposites than for PP. From the optical microscopy studies, it was found that the PP spherulites decreased in size when SWNT was introduced into the polymer and also the mature spherical shaped crystals of PP changed in part to the immature kidney- or bean-shaped crystal forms in the nanocomposites. In addition, the crystallization kinetics was also studied by using isothermal spherulitic growth rate, and the values of nucleation constant, K_g, and end surface free energy, σ_e, were calculated for PP and the nanocomposites according to Lauritzen–Hoffman theory. The reductions of these two parameters were in agreement with the fact that the rate of crystallization of PP in nanocomposites was higher than that of the pristine polymer.     

Study of the Nonisothermal Crystallization Kinetics and Melting Behaviors of Polypropylene Reinforced with Single-Walled Carbon Nanotubes Nanocomposite

Nonisothermal crystallization kinetics of polypropylene (PP) nanocomposite reinforced with 0.5 wt. % single-walled carbon nanotubes (SWNT) was characterized by differential scanning calorimetry at five different cooling and heating rates. The Avrami, Ozawa, and Seo-Kim kinetic models were used to describe the nonisothermal crystallization of the polymer and its nanocomposite. The addition of nano-filler, in general, improved the crystallization rate and increased the peak crystallization temperature of the nanocomposite as compared to PP. The results show that the Avrami and Seo-Kim models are suitable under different cooling rate conditions but that the Ozawa model is inappropriate for the nanocomposite. Equilibrium melting temperatures, derived from the linear Hoffman-Weeks equation, were shown to decrease in the nanocomposite. Additional analysis was performed based on the Thomson-Gibbs, Lauritzen-Hoffman, and Dobreva-Gutzowa theories, which were applied to take into account the lamellar thickness, nucleating agent, and nucleating activity of the nanocomposite in the nonisothermal melt crystallization process.