On the redox reactions between allyl radicals and NOx

NO_x mitigation is a central focus of combustion technologies with increasingly stringent emission regulations. NO_x can also enhance the autoignition of hydrocarbon fuels and can promote soot oxidation. The reaction between allyl radical (C₃H₅) and NO_x plays an important role in the oxidation kinetics of propene. In this work, we measured the absolute rate coefficients for the redox reaction between C₃H₅ and NO_x over the temperature range of 1000–1252 K and pressure range of 1.5–5.0 bar using a shock tube and UV laser absorption technique. We produced C₃H₅ by shock heating of C₃H₅I behind reflected shock waves. Using a Ti:Sapphire laser system with frequency quadrupling, we monitored the kinetics of C₃H₅ at 220 nm. Unlike low-temperature chemistry, the two target reactions, C₃H₅ + NO → products (R1) and C₃H₅ + NO₂ → products (R2), exhibited a strong positive temperature dependence for this radical-radical type reaction. However, these reactions did not show any pressure dependence over the pressure range of 1.5–5.0 bar, indicating that the measured rate coefficients are close to the high-pressure limit. The measured values of the rate coefficients resulted in the following Arrhenius expressions (in unit of cm³/molecule/s):$k_1\left({\mathrm{C}}_3{\mathrm{H}}_5+\text{NO}\right)=1.49\times {10}^{?10}\exp \left(?6083.6\frac{\mathrm{K}}{T}\right)\left(1017?1252K\right)$$k_2\left({\mathrm{C}}_3{\mathrm{H}}_5+\mathrm{N}{\mathrm{O}}_2\right)=1.71\times {10}^{?10}\exp \left(?3675.7\frac{\mathrm{K}}{T}\right)\left(1062?1250K\right)$To our knowledge, these are the first high-temperature measurements of allyl + NO_x reactions. The reported data will be highly useful in understanding the interaction of NO_x with resonantly stabilized radicals as well as the mutual sensitization effect of NO_x on hydrocarbon fuels.     

Volumetric determination of Pt(IV) in the presence of Ir,Pd, and Rh with ferrous ammonium sulfate in alkaline mannitol medium

A potentiometric reductimetric method for the determination of platinum (Pt(IV)Pt(II)) with a standard Fe(II) solution in an alkaline medium of mannitol is described. The method, the error of which does not exceed 2%, can be used in the presence of palladium, iridium, and rhodium.     

Objective measurement of minimal erythema and melanogenic doses using natural and solar-simulated light

Very little information exists on the amount of natural and artificial UV light required to cause sunburn and tanning in individuals with very pale skin who are at the greatest risk of developing skin cancer. We have investigated minimal erythema dose (MED) and minimal melanogenic dose (MMD) in a group of 31 volunteers with Fitzpatrick skin types I and II using an Oriel 1000 W xenon arc solar simulator and natural sunlight in Sydney, Australia. We measured the erythemal and melanogenic responses using conventional visual scoring, a chromameter and an erythema meter. We found that the average MED measured visually using the artificial UV source was 68.7 +/- 3.3 mJ/cm2 (3.4 +/- 0.2 standard erythema doses [SED]), which was significantly different from the MED of sunlight, which was 93.6 +/- 5.6 mJ/cm2 (P < 0.001) (11.7 +/- 0.7 SED). We also found significant correlations between the solar-simulated MED values, the melanin index (erythema meter) and the L* function (chromameter). The average MMD (obtained in 16 volunteers only) using solar-simulated light was 85.6 +/- 4.9 mJ/cm2, which was significantly less than that measured with natural sunlight (118.3 +/- 8.6 mJ/cm2; P < 0.05). We mathematically modeled the data for both the chromameter and the erythema meter to see if we were able to obtain a more objective measure of MED and differentiation between skin types. Using this model, we were able to detect erythemal responses using the erythema index function of the erythema meter and the a* function of the chromameter at lower UV doses than either the standard visual or COLIPA methods.     

Optical and Electrical Properties of Polymerizing Plasmas and Their Correlation with DLC Film Properties

Diamond-like carbon (DLC) films were grown from radiofrequency plasmas of acetylene-argon mixtures, at different excitation powers, P. The effects of this parameter on the plasma potential, electron density, electron temperature, and plasma activity were investigated using a Langmuir probe. The mean electron temperature increased from about 0.5 to about 7.0 eV while the mean electron density decreased from about 1.2 × 10⁹ to about 0.2 × 10⁹ cm^–3 as P was increased from 25 to 150 W. Both the plasma potential and the plasma activity were found to increase with increasing P. Through actinometric optical emission spectrometry, the relative concentrations of CH, [CH], and H, [H], in the discharge were mapped as a function of the applied power. A rise in [H] and a fall in [CH] with increasing P were observed and are discussed in relation to the plasma characteristics and the subimplantation model. The optical properties of the films were calculated from ultraviolet-visible spectroscopic data; the surface resistivity was measured by the two-point probe method. The optical gap, E _G, and the surface resistivity, _s, fall with increasing P. E _G and _s are in the ranges of about 2.0–1.3 eV and 10¹⁴–10¹⁶ /, respectively. The plasma power also influences the film self-bias, V _b, via a linear dependence, and the effect of V _b on ion bombardment during growth is addressed together with variation in the relative densities of sp² and sp³ bonds in the films as determined by Raman spectroscopy.     

Co-thickness and oxidation states effect on magnetic anisotropy in Co/MgO heterostructure

Interfacial magnetism and magnetic anisotropy constant ($K_i$) in Co/MgO heterostructure have been studied using ab-initio density functional calculations. It is found that interfacial Co spin magnetic moment shows a strong interdependence on Co-O bond lengths and a reasonable spin-polarization of ～80% is established as a function of Co layers. Our results revealed a saturated positive (out-of-plane) $K_i$ of +2.80 mJ/m² at ≥12 Co layers (～1.6 nm Co thickness), which is associated with orbital magnetic moment difference in [100] and [001] direction along with a strong hybridization between $d_{xy}$ and $d_{x^2?y^2}$ orbitals through orbital angular momentum operator $\stackrel{?}{L_z}$. Furthermore, it is shown that the $K_i$ magnitude almost remains constant and weakens in the case of under- and over-oxidations in the interfacial MgO and Co layers, respectively. Interestingly, $K_i$ improved for oxygen migrated interface due to enhanced $d_{xy}$ and $d_{x^2?y^2}$ orbitals coupling. The disordered interfaces stability is checked by analyzing the formation energy. Hence, the present findings disclose that the higher Co thickness in ordered Co/MgO structure supports to out-of-plane [001] (positive) $K_i$, which could be useful for its technological implementation in high-density magnetic data storage devices with high thermal stability.     

New heteroleptic palladium(II) dithiocarbamates: synthesis,characterization, packing and anticancer activity against five different cancer cell lines

Two new heteroleptic palladium(II) complexes have been synthesized by reacting equimolar quantities of palladium(II) chloride, sodium 4‐(2‐methoxyphenyl)piperazine‐1‐carbodithioate and diphenyl‐p‐tolylphosphine ( 1 ) or tri‐p‐tolylphosphine ( 2 ). Complexes 1 and 2 have been characterized using elemental analysis, Fourier transform infrared spectroscopy, multinuclear NMR (¹H, ¹³C and ³¹P) spectroscopy and single‐crystal X‐ray analysis. The latter technique confirms a pseudo square‐planar geometry in which two adjacent positions are occupied by bidentate dithiocarbamate while chloro and substituted triphenylphosphine are present at the remaining two positions. The anticancer activity of both complexes against five different cancer cell lines (LU – human lung carcinoma, established at UIC, Department of Surgical Oncology; MCF7 – human breast adenocarcinoma, ATCC number HTB‐22?; MDA‐MB‐231 – human breast adenocarcinoma, ATCC number HTB‐26?; Hepa‐1c1c7 – mouse liver hepatoma, ATCC number CRL‐2026?; PC‐3 – human prostate adenocarcinoma, ATCC number CRL‐1435?) was determined by MTT assay, revealing 2 has higher activity than 1 . A drug–calf thymus DNA binding study with UV–visible spectroscopy reveals a higher DNA binding affinity of 2 (3.511 × 10⁴ M^?1) than 1 (4.213 × 10³ M^?1). Density functional theory studies confirm the relatively more stable nature of 2 than 1 . Copyright © 2016 John Wiley & Sons, Ltd.     

Metal-based anticancer agents: targeting androgen-dependent and androgen-independent prostate and COX-positive pancreatic cancer cells by phenanthrenequinone semicarbazone and its metal complexes

A planar, polycyclic and aromatic hydrocarbon ligand, namely 9,10-phenanthrenequinone semicarbazone, and its transition metal complexes have been synthesized and structurally characterized. The in vitro antiproliferative activity of these compounds against five human cancer cell lines revealed that they were effective against androgen receptor-positive/negative prostate cancer cells as well as COX-positive pancreatic BxPC-3 cancer cell line. The driving force behind such antiproliferative activity seems to be the up-regulated COX expression in these cells, which was amenable for targeting through metal complexation. These structural motifs can, therefore, serve as a starting point for developing novel cytotoxic agents against the growing number of prostate and pancreatic cancers.     

A study of heat and mass transfer of Non-Newtonian fluid with surface chemical reaction

Considering the significance of non-Newtonian fluid usage in manufacturing such as molten plastics, polymeric materials, pulps, and so on, significant efforts have been made to investigate the phenomenon of non-Newtonian fluids. In this article the influences of heat and mass transfer on non-Newtonian Walter's B fluid flow over uppermost catalytic surface of a paraboloid is encountered. An elasticity of the fluid layer is considered in the freestream together with heat source/sink and has the tendency to cause heat flow in the fluid saturated domain. The flow problem of two-dimensional Walter's B fluid is represented using Law of conservation of mass, momentum, heat, and concentration along with thermal and solutal chemical reactive boundary conditions. The governing equations are non-linear partial differential equation and are non-dimensionalized by employing stream function and similarity transformation. The final dimensionless equations yielded are coupled non-linear ordinary differential equations. Furthermore, shooting technique along with RK-4th order method is used to get the numerical results. Graphs and tables are modeled by using MATLAB software to check the effects of Walter's B parameter, Chemical reaction parameter and Thickness parameter on temperature, velocity, and concentration profiles. Tabular analysis shows the results of some physical parameters like skin friction coefficient, Nusselt number and Sherwood number due to the variation of Walter's B parameter, thickness parameter and chemical reactive parameter.     

Synthesis and inverse virtual screening of new bi-cyclic structures towards cancer-relevant cellular targets

Structural Chemistry - We report here synthetic approaches to access new classes of small molecules based on three heterocyclic scaffolds, i.e. 3,7-dihydropyrimido[4,5-d]pyridazine-4,8-dione,...     

Selenium Alleviates the Adverse Effect of Drought in Oilseed Crops Camelina (Camelina sativa L.) and Canola (Brassica napus L.)

Drought poses a serious threat to oilseed crops by lowering yield and crop failures under prolonged spells. A multi-year field investigation was conducted to enhance the drought tolerance in four genotypes of Camelina and canola by selenium (Se) application. The principal aim of the research was to optimize the crop yield by eliciting the physio-biochemical attributes by alleviating the adverse effects of drought stress. Both crops were cultivated under control (normal irrigation) and drought stress (skipping irrigation at stages i.e., vegetative and reproductive) conditions. Four different treatments of Se viz., seed priming with Se (75 μM), foliar application of Se (7.06 μM), foliar application of Se + Seed priming with Se (7.06 μM and 75 μM, respectively) and control (without Se), were implemented at the vegetative and reproductive stages of both crops. Sodium selenite (Na₂SeO₃), an inorganic compound was used as Se sources for both seed priming and foliar application. Data regarding physiochemical, antioxidants, and yield components were recorded as response variables at crop maturity. Results indicated that WP, OP, TP, proline, TSS, TFAA, TPr, TS, total chlorophyll contents, osmoprotectant (GB, anthocyanin, TPC, and flavonoids), antioxidants (APX, SOD, POD, and CAT), and yield components (number of branches per plant, thousand seed weight, seed, and biological yields were significantly improved by foliar Se + priming Se in both crops under drought stress. Moreover, this treatment was also helpful in boosting yield attributes under irrigated (non-stress) conditions. Camelina genotypes responded better to Se application as seed priming and foliar spray than canola for both years. It has concluded that Se application (either foliar or priming) can potentially alleviate adverse effects of drought stress in camelina and canola by eliciting various physio-biochemicals attributes under drought stress. Furthermore, Se application was also helpful for crop health under irrigated condition.