Preparative isolation of (+)-beta-eudesmol fromAmyris balsamifera

Summary Optically pure (+)-beta-eudesmol is a possible starting material for the synthesis of several termite defense compounds. A two step procedure for the isolation of gram quantities of (+)-beta-eudesmol from commercially availableAmyris balsamifera oil (syn. West Indian sandalwood oil), containing 8% beta-eudesmol, was developed. Step one consisted of an efficient vacuum distillation of the total oil. Step two was a medium pressure LC separation with an AgNO₃ impregnated silica gel stationary phase. Several other separation procedures failed due to the presence of many closely related sesquiterpene alcohols (75% of the oil).     

Solvent‐assisted prototyping of microfluidic and optofluidic microsystems in polymers

Due to their low‐cost and processing simplicity, polymers have made a substantial impact on everyday life and scientific discoveries. Such discoveries include the use of microanalysis and optical microsystems, which—albeit simpler to prototype than their inorganic counterparts—still require dedicated procedures at high temperatures and pressures. Here, recent developments in microsystem prototyping are highlighted, based on solvent‐assisted polymer stimulation. These developments—largely inspired by the earlier demonstration of solvent‐assisted micromolding (SAMIM) for nanoimprinting—enable micronscale imprinting, but also bonding to substrates and three‐dimensional chemical functionalization via strict benchtop procedures. These solvent‐assisted strategies are categorized into two groups: those based on solvent immersion and those based on complete polymer dissolution. Recent embodiments within each group are discussed and compared in performance. Solvent‐assisted prototyping further narrows the gap of processing complexity and costs between the PDMS elastomer and thermoplastic polymer microfluidics, and also enables novel architectures and thus new opportunities in microscale Life Sciences and Chemistry investigations. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1681–1686     

Electro-switchable polydimethylsiloxane-based optofluidics

We report on the fabrication and characterization of a new generation of electro-switchable optofluidic devices based on flexible substrates, combined with the extraordinary properties of reconfigurable soft-materials. A conductive polydimethylsiloxane microstructure has been first sputtered with an Indium Tin Oxide (ITO) layer and then functionalized with an amorphous film of SiO(x). Then, the "layer" by "layer" microstructure has been infiltrated with an anisotropic and reconfigurable fluid (Nematic Liquid Crystal, NLC). The sample has been characterized in terms of morphological, optical and electro-optical properties: the soft-conductive microstructure exhibits a uniform and regular morphology, even after testing with mechanical stretching and deformations. Combination of the conductive ITO with the functionalization film (which has been employed for inducing in-plane alignment of NLC molecules) enables us to carry out a series of optical and electro-optical experiments; these confirm excellent properties in terms of a reconfigurable device and a diffractive element as well.     

Elastomer based tunable optofluidic devices

The synergetic integration of photonics and microfluidics has enabled a wide range of optofluidic devices that can be tuned based on various physical mechanisms. One such tuning mechanism can be realized based on the elasticity of polydimethylsiloxane (PDMS). The mechanical tuning of these optofluidic devices was achieved by modifying the geometry of the device upon applying internal or external forces. External or internal forces can deform the elastomeric components that in turn can alter the optical properties of the device or directly induce flow. In this review, we discuss recent progress in tunable optofluidic devices, where tunability is enabled by the elasticity of the construction material. Different subtypes of such tuning methods will be summarized, namely tuning based on bulk or membrane deformations, and pneumatic actuation.     

Modular polymer biosensors by solvent immersion imprint lithography

We recently demonstrated Solvent Immersion Imprint Lithography (SIIL), a rapid benchtop microsystem prototyping technique, including polymer functionalization, imprinting and bonding. Here, we focus on the realization of planar polymer sensors using SIIL through simple solvent immersion without imprinting. We describe SIIL's impregnation characteristics, including an inherent mechanism that not only achieves practical doping concentrations, but their unexpected 2‐fold enhancement compared to the immersion solution. Subsequently, we developed and characterized optical sensors for detecting molecular O₂. To this end, a substantially high dynamic range is reported, including its control through the immersion duration, a manifestation of SIIL's modularity. Overall, SIIL exhibits the potential of improving the operating characteristics of polymer sensors, while significantly accelerating their prototyping, as it requires a few seconds of processing and no need for substrates or dedicated instrumentation. These are critical for O₂ sensing as probed by way of example here, as well as any polymer permeable reactant. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 98–103     

Investigations into beam monitors at the AEg ̄ IS experiment

Detailed diagnostic of antiproton beams at low energies is required for essentially all experiments at the Antiproton Decelerator (AD), but will be particularly important for the future Extra Low ENergy Antiproton ring (ELENA) and its keV beam lines to the different experiments. Many monitors have been successfully developed and operated at the AD, but in particular beam profile monitoring remains a challenge. A dedicated beam instrumentation and detector test stand has recently been setup at the AE \(\bar {g}\) IS experiment (Antimatter Experiment: Gravity, Interferometry, Spectroscopy). Located behind the actual experiment, it allows for parasitic use of the antiproton beam at different energies for testing and calibration. With the aim to explore and validate different candidate technologies for future low energy beam lines, as well as the downstream antihydrogen detector in AE \(\bar {g}\) IS, measurements have been carried out using Silicon strip and pixel detectors, a purpose-built secondary emission monitor and emulsions. Here, results from measurements and characterization of the different detector types with regard to their future use at the AD complex are presented.