Multiple Scattering Effects of Ag Particles in Random Ag-SiN Film

A layer of 40nm-thick Ag-SiN film with Ag nano-particles embedded and distributed randomly in the SiN thin film were deposited by the method of radiant-frequency magnetron sputtering. Specimens orderly comprising a random Ag-SiN film and an optical phase change recording layer were exposed to a focused laser beam with wavelength of 69Ohm. It is shown that, with a random Ag-SiN layer deposited above the recording layer. Calculation by the finite difference time domain method of a 4Ohm-thick SiN film under a Gaussian beam irradiation has been carried out to simulate the near-field distribution in the film, which showed a huge local near-field intensity enhancement of about 200 times if small Ag particles with diameter of 6 nm were modelled inthe SiN film in the central region of the in cident laser spot.     

基于Delaunay三角法的电压门控钾离子通道的分类和拓扑结构识别

本文构建了一个Delaunay模型对电压门控钾离子(Kv)通道进行预测。该方法通过建立一系列带有隐含变量的单纯形来分类电压门控钾离子通道,然后通过未知序列在主成分空间里面的投影来预测结构。结果表明该模型无论是在分类和结构预测上均可以得到很好的结果。     

Experimental and Theoretical Evidence for the Existence of Broad Forbidden Gaps in the Three—Component Composite

The influence of localized resonance on the properties of band-gaps of the two-dimensional periodic composite are analysed numerically and experimentally by comparing the two-component phononic crystal with the three-component one. The three-component composite which exhibits localized resonance in the elastically soft coating ring is composed of a square array of coated cylinders embedded in an epoxy resin. The coated cylinders consist of a steel inner core and a rubber coating, which has much smaller wave velocity and mass density than the matrixand tile inner material. Tile measured transmission power of tile three-component composite drops to the noise level in a broad ultrasonic frequency interval in contrast to the binary composite, which is in good agreement with the calculation using the finite element method.     

在配位体络合体系中合成窄分布聚苯乙烯

本文报道了在RLi-配位体络合体系中阴离子聚合方法合成窄分布聚苯乙烯的研究结果.在己烷、庚烷、甲苯等溶液中合成分子量范围为10~2～10~3。的窄分布聚苯乙烯(MWD<1.10)时,以鹰爪豆矸、N,N,N’,N’-四甲基乙二胺为配位体的络合体系,聚合操作简便,效果非常好.在非极性溶剂中加一定比例的THF以后,该体系也能合成分子量范围为10~4～10~5的窄分布聚苯乙烯.     

Stereoselective Synthesis of （E）-α-Aryltellurenylvinyl-stannanes and Their Application in the Synthesis of Stereodefined Trisubstituted Alkenes

(E)-α-Aryltellurenylvinylstannanes have been synthesized stereoselectively via the hydrozirconation of alkynylstannanes, followed by the reactions with aryltellurenyl iodides. (E)-α-Aryltellurenylvinylstannanes can undergo sequential cross coupling reactions with both electrophiles and nucleophiles in the presence of transition metal complexes to form two carbon-carbon bonds in the same olefinic carbon leading to trisubstituted alkenes stereoselectively.     

还原氧化石墨烯@泡沫镍载CoO纳米花电极制备及催化CO2性能

本文以氧化石墨烯包覆泡沫镍电极(GO@NF)作为基底,采用水热法在GO@NF基底上原位生长CoO纳米花,同时GO在水热过程中被同步热还原为还原氧化石墨烯(RGO),从而一步制得还原氧化石墨烯包覆泡沫镍负载CoO纳米花电极(CoO/RGO@NF)。使用XRD和SEM对CoO/RGO@NF电极进行表征,发现CoO纳米花均匀生长在泡沫镍三维网络结构上,CoO纳米花为大量针状纳米棒围绕一个中心而成的花状结构,纳米棒的长度约为10 ~ 15 μm,直径约为100 ~ 200 nm。使用循环伏安和线性扫描法测试了CoO/RGO@NF电极电催化CO₂的还原性能,在-0.76 V（vs. SHE）电位下,CoO/RGO@NF电极电催化CO₂还原的电流效率达到70.9%,产甲酸法拉第效率达到65.2%,甲酸产率为59.8 μmol·h^-1·cm^-2,且电极可持续稳定电催化还原CO₂ 4 h,表明CoO/RGO@NF电极对CO₂电还原有着优良的催化活性、选择性和稳定性。     

神奇的手指

你在计算18×19时,如果恰逢大脑“短路”,你会怎么做呢？你会不会还选择数自己的手指头,有时手指头不够用,甚至还要加上自己的双脚呢？当然如果你要使用计算器,那么我们能说什么呢？但是有更好玩的,我们何不去尝试一下呢。一起跟着动动手吧！     

金属有机骨架薄膜材料的三阶非线性光学性能研究进展

金属有机骨架(MOFs)材料因其可设计的结构以及灵活可控的配位模式,在三阶非线性光学(NLO)领域引起了广泛的关注。与液体分散状态相比,MOFs在固体状态下的三阶NLO性能更为重要,这不仅可以深入了解MOFs本身所固有的光学性能,还有助于实现MOFs在光学器件中的实际应用。然而,由于散射的存在和透光率的限制,单独的MOFs材料难以直接实现固体状态下的三阶NLO性能研究,将MOFs制备成具有较好光学透过性的薄膜是研究其NLO性能最为可行的一种策略。MOFs薄膜不仅很好地继承了MOFs所固有的三阶NLO性能,而且还结合了薄膜的高透光率以及灵活的机械性能。基于此,本文分析总结了MOFs薄膜的制备方法及其NLO性能研究方面的相关工作,并根据目前MOFs薄膜在三阶NLO性能方面的研究现状对其未来发展予以了展望。     

毛细管电泳技术快速检测牙周病原菌

建立了毛细管电泳快速检测牙龈卟啉单胞菌(P.g)、齿垢密螺旋体(T.d)、福赛斯坦纳菌(T.f)3种牙周病病原菌种的方法。紫外分光光度法表明,采用无菌吸潮纸尖及PBS缓冲液可以实现牙周病原菌的快速有效提取。对提取的牙周病病原菌种做多聚酶链式反应(PCR)与多重PCR反应,最后以20 cm长,75μm内径的石英毛细管作为分离通道,分离电压4000 V,1.2%羟乙基纤维素(HEC,250 K)为筛分介质,牙周病病原菌菌种P.g,T.d,T.f PCR及多重PCR产物12 min内得到较好分离。结果表明,毛细管电泳与PCR技术相结合,可以实现牙周病原菌种快速鉴定,且检测限低至4.80×10-11ng/μL。方法已用于牙周病原菌菌种的快速检测。