排序方式: 共有4条查询结果,搜索用时 15 毫秒
1
1.
以晶体硅金刚线切割废料为原料,通过氮化反应制得氮化硅,既回收了金刚线切割废料,又解决了环境污染的问题。 通过X射线衍射仪(XRD)、扫描电子显微镜(SEM)和X射线能量色谱仪(EDS)等技术手段研究了原料经HCl和HF酸洗净化后制备氮化产物的物相组成、组分质量分数和微观形貌的影响。 结果表明,HCl酸洗后切割废料制备的氮化产物中主要物相为Si2N2O和Si3N4,而HF酸洗后切割废料制备的氮化产物中主要物相为Si3N4。 氮化产物中Si2N2O的形成与切割废料中SiO2的质量分数有关,降低原料中SiO2的质量分数是切割废料经过高温氮化制得氮化硅的前提。 相似文献
2.
在温度为2050℃,压力为20 MPa的条件下,通过热压烧结的方法在碳化硼(B4C)中分别添加2%~5%的CeO2制备B4C-CeB6复合材料。通过原位反应在B4C中引入CeB6。详细研究了CeO2添加量对B4C-CeB6复合材料的微观结构和力学性能的影响。结果表明:随着CeO2添加量的增加(不超过4%),B4C-CeB6复合材料的相对密度和力学性能逐渐升高;但是当CeO2添加量超过4%时,产生的CO增多会导致复合材料的相对密度和显微硬度下降;当CeO2含量较低时,由于CeB6的断裂韧性要比纯B4C高,裂纹穿过CeB6相断裂就会消耗更多的能量,使复合材料的断裂韧性得以提高;而当CeO2含量较高时,... 相似文献
3.
Fe-doped In2O3 films are grown epitaxially on YSZ (100) substrates by pulsed laser deposition. The in-situ reflection high-energy electron diffraction, the atomic force microscopy, and the x-ray diffraction patterns show that the films have a well defined cubic structure epitaxially oriented in the (100) direction. Room temperature ferromagnetism is observed by an alternating gradient magnetometer. Strong perpendicular magnetic anisotropy with a remnant magnetization ratio of 0.83 and a coercivity of 2,5 kOe is revealed. Both the structural and the magnetic measurements suggest that this ferromagnetism is an intrinsic property deriving from the spin-orbit coupling between the diluted Fe atoms. 相似文献
4.
1