深度学习与“课程思政”协同效应的策略研究——以医用物理学为例

以医用物理学为载体,以深度学习为核心,以达成"课程思政"对课程和学生的要求为目标,探讨了深度学习与"课程思政"的内在联系,在提出课堂教学困境的基础上,讨论了实现深度学习与"课程思政"协同效应的策略,包括提高参与程度、完善学习过程、建构知识的意义和采用多元评价方式.     

CSNS铁氧体环性能初步测试

用于中国散裂中子源CSNS的环射频铁氧体同轴谐振腔,工作频率在1.02MHz至2.42MHz.论文对决定腔性能的铁氧体环材料进行了性能测试研究.通过改变铁氧体环的偏置磁场来改变铁氧体的磁导率,使腔的等效电感发生变化,从而使得LC并联谐振回路的谐振频率改变,进而获得铁氧体环在不同频率,不同高频磁场强度下的μrqf、品质因数和功率密度值.本文比较了几种不同铁氧体环的测量结果,选择适合于CSNS的环射频铁氧体谐振腔的材料为4M2.     

钙、铁、硅(碱度)X荧光分析仪在攀钢炼铁厂的应用

采用钙、铁、硅（碱度）X荧光分析仪进行烧结球团中Si、Ca、Fa元素（碱度）含量的测定，结果表明，该仪器满足烧结球团中元素（碱度）快速、准确分析的要求。     

Study on the 1.3 GHz low loss shape superconducting cavities at IHEP

As part of the international research program on the superconducting cavity for the International Linear Collider (ILC) R&;D on the 1.3 GHz low loss superconducting cavities has been carried out at the Institute of High Energy Physics (IHEP) since 2005. A design of 1.3 GHz low loss cavity shape was proposed and six single-cell cavities of different niobium material were successfully fabricated with standard technology. In this study our priority was on large grain (LG) cavities. The two LG cavities were treated with complete procedures of surface treatments based on chemical polishing (CP) without electro polishing (EP) at IHEP. The two LG cavities and a fine grain cavity were sent to KEK for vertical testing. All the three cavities reached accelerating gradients higher than 35 MV/m and the maximum gradient of 40.27 MV/m was achieved in the LG cavity. This paper presents the process of the vertical RF tests and the comparison of the LG and fine grain cavities's performance.     

CSNS/RCS环射频腔用铁氧体环测试系统研制

为测试环射频铁氧体加载同轴谐振腔中铁氧体环的性能和批量筛选铁氧体环,研制了铁氧体双环测量系统。与国内外同类设备相比,该系统采用了扫频测量的闭环控制,可以模拟射频腔的运行工况、实现对铁氧体环性能的动态测量。扫频范围测量结果表明:该测试系统满足在0~3 000 A偏流调谐范围内的1.02~2.44 MHz频率覆盖要求,固定频率点的高功率测量结果和材料性能参数与日本J-PARC测量数据吻合。     

CSNS铁氧体环性能初步测试

用于中国散裂中子源CSNS的环射频铁氧体同轴谐振腔, 工作频率在1.02MHz至2.42MHz. 论文对决定腔性能的铁氧体环材料进行了性能测试研究. 通过改变铁氧体环的偏置磁场来改变铁氧体的磁导率, 使腔的等效电感发生变化, 从而使得LC并联谐振回路的谐振频率改变, 进而获得铁氧体环在不同频率, 不同高频磁场强度下的μ_rQf、品质因数和功率密度值. 本文比较了几种不同铁氧体环的测量结果, 选择适合于CSNS的环射频铁氧体谐振腔的材料为4M2.     

Experimental study on SC RF cavities by using China large grain niobium for ILC

Large grain niobium has the potential of simplifying the production sequence and consequently reducing the cost of the superconducting RF cavities for ILC. To investigate the feasibility of fabrication and the possibility to achieve high gradient by large grain cavities, two 1.3GHz cavities were made of China large grain niobium and a series of vertical tests were carried out following several different surfaces treatment procedures. Two cavities have both reached the high gradient of more than 43MV/m repeatedly and the maximum accelerating field of 47.9MV/m has been achieved by China large grain niobium. This paper introduces the features of the fabrication and surface treatments on the large grain cavities and presents the preliminary results of the research.