排序方式: 共有9条查询结果,搜索用时 15 毫秒
1
1.
2.
为探究格栅式回热器的换热性能,首先建立了近似的圆管解析模型,并采用数值法验证了圆管解析模型的正确性,数值解和解析解最大均方误差不超过0.025,基于此误差很小。然后分析了格栅式回热器六方管和圆管的温度分布和换热量,并对两种不同结构的温度分布和换热量进行误差分析。结果表明:六方管和圆管温度的最大均方误差为1.8,随着频率的越大,两种等效结构之间的温度误差和换热量误差就越大,圆管解析解和六方管数值解换热量的最大误差不超过0.026,在误差允许范围内用近似的圆管解析模型代替六方管是可行的。 相似文献
3.
膜分离技术具有效率高、投资相对较低、运行维护费用低等优点,在脱盐、环境保护、石油化工、清洁生产、医药和食品等领域得到广泛的应用。常规高分子分离膜在有机溶剂中难以保持形态稳定,限制了其在有机体系的应用,而通过交联改性可以显著提高膜的耐有机溶剂性,继而可应用于物料分离、药物浓缩与精制、溶剂与催化剂回收等过程,具有巨大的应用潜力。本文对高分子分离膜的交联研究进行了总结,根据交联剂引入膜中的工艺阶段,将交联方法分为交联剂预引入法、交联剂同步引入法和交联剂后引入法三种,并进一步根据交联机理或高分子材料对每种方法进行了详述,并对研究的未来趋势进行了展望。 相似文献
4.
利用Au/ITO纳米复合材料设计了一种自参照表面等离子体共振传感器.该传感器产生的光谱有两个共振峰,即共振峰1和共振峰2.共振峰1随着待测介质折射率和入射角的变化产生漂移,而共振峰2仅随入射角的变化产生漂移,两个共振峰相互参照,降低了入射角偏移对测量结果的影响,提高了测量的准确性.在纳米复合材料的4种不同体积分数下,仿真分析了入射角、待测介质折射率和薄膜厚度变化对两个共振波长的影响.在入射角θ为80°,且金的体积分数f为0.65,薄膜厚度d为40nm和45nm,或金的体积分数f为0.85,薄膜厚度d为45nm和50nm时,共振峰2不随待测介质折射率的变化而变化,只有共振峰1随待测介质折射率的变化而变化,达到自参照传感器的理想状态. 相似文献
5.
A cataphoretic input of calcium vapour into the active volume of pulsed He-Ca^+ laser is designed and made. The recombination laser at 373.3 nm and the R-M transition laser at 854.6 nm are achieved experimentally with modified Blumlein circuit by high-frequency longitudinal pulsed discharge. The dependences of work parameters such as the pulse frequency, the power supply voltage and the helium pressure on laser output characteristics at 373.3nm line are measured and discussed. The maximum laser output power of 136mW and the specific power of 5.9 m W/cm^3 are obtained, respectively. 相似文献
6.
设计了一种带有金属脊和氟化镁夹层的紫外混合表面等离子体纳米激光器。在COMSOL Multiphysics软件的基础上,使用有限元法分析了所设计激光器结构的电场分布、模式特性、品质因数和增益阈值。结果表明:在工作波长为390 nm的紫外波段,通过最优参数设计,其光场约束可达到较好的深亚波长水平,同时保持高的品质因数、低的损耗和阈值。与平坦金属层结构相比,在相同的参数下,所设计的结构具有更强的光场限制能力和更强的微腔束缚能力,有潜力使纳米设备趋于小型化和集成化。 相似文献
7.
8.
The parametric optimization of the Ne--CuBr UV laser excited by
longitudinal pulsed discharge is analysed by using a self-consistent
kinetic model. Consistent characteristics of the optimization
process are obtained by comparing with the experimental results.
Simulation results show that neon ions come into being along with
considerable depletion of the ground-state copper atoms. And the
optimization of the discharge tube diameter is the tradeoff between
the specific output photon density and the total active volume. Both
the optimal neon gas pressure and the optimal reservoir temperature
result from the balance between the neon ion density and the
ground-state copper atom density to arrive at a maximum of their
product. 相似文献
9.
唾液酸酶和唾液酸糖基转移酶在生物体内许多重要的生理过程中发挥着不可或缺的作用.一般而言,唾液酸酶可以断裂糖缀合物末端与唾液酸残基相连接的糖苷键而水解唾液酸糖缀合物;唾液酸糖基转移酶以CMP-Neu5Ac为底物将唾液酸残基转移至新的糖基受体上.综述了与唾液酸相关的酶的分类、结构与催化反应机理;唾液酸酶和唾液酸糖基转移酶催化反应在有机合成中的应用;以及唾液酸酶的检测方法.对未来与唾液酸相关的酶的研究与应用进行了展望. 相似文献
1