低温太阳热能与化学链燃烧相结合控制CO2分离动力系统

本文探索并提出控制CO2分离的低温太阳热能与清洁合成燃料甲醇-三氧化二铁化学链燃烧相结合的新颖能源动力系统。基于图象(?)分析方法,明确地指出甲醇化学链燃烧能量释放过程燃烧堋损失减小和低温太阳热能品位提升的机理。从能源有效利用和环境相容出发,研究和揭示化学链燃烧与太阳能有机整合共同减小CO2分离能耗的特性规律。相比不分离常规联合循环,新系统(?)效率提高约6．2个百分点;与分离CO2的联合循环相比,新系统媚效率提高约14．2个百分点。同时,低温太阳热能热转功效率可达到22．5％。     

简易旋转倒立摆及控制装置的系统设计

采用ATmega128作为本旋转倒立摆控制装置的主控芯片,通过直流电机对旋转臂进行控制,实现对摆杆的旋转控制。用编码器对摆杆旋转角度进行测量,将旋转位移转换成数字脉冲实现控制。通过对编码器设定零点,运用PID算法实现精确控制摆杆的摆动角度与状态。测试结果表明,该简易旋转倒立摆及控制装置的系统设计方法科学,具有性能稳定、抗干扰能力强、控制精确,可靠性高,节能环保等优点。     

基于新建筑抗震设计规范考虑场地土特性的人工波生成及可靠性研究

基于新《建筑抗震设计规范》对场地土特性和人工波选择的要求,将地震动作为随机过程,利用修正胡聿贤-周锡元模型以及基于Hartley正交基的地震动随机过程经双调制生成不同场地土特性的人工地震波,以6层钢筋混凝土结构非线性随机地震反应分析为例,研究了不同场地土特性人工波对结构位移可靠度的影响。结果表明,场地土因素对人工波生成以及结构的动力响应影响较大,不同场地土人工波具有明显的统计学特性,均满足建筑抗震设计规范的选波要求,为最新《建筑抗震设计规范》要求考虑大量不同场地土效应的地震波生成提供了新的解决办法。     

基于Optisystem的光纤传感磁场测试系统性能仿真

利用Optisystem实现了FBG光纤传感磁场测试系统。基于马赫曾德干涉原理,搭建了光纤光栅仿真模型及模型中的参数设置,并通过探测光路与参考光路的对比实现了对模拟磁场的测试。仿真结果表明,建立的FBG光纤传感磁场测试系统具有良好的可靠性,Optisystem适合光纤传感系统课程实验。     

改进的同步迭代算法在光声血管成像中的应用

光声成像结合了光学成像和声学成像的优点，是一种高分辨率，高对比度的无损伤医学成像技术.一种改进的同步迭代算法应用于光声图像重建.仿真和模拟结果表明，与传统的代数迭代算法相比，在90°，135°，180°的有限场光声成像中，此算法对测量误差的校正和迭代次数的收敛上具有较大的优势，图像重建的速度和成像质量都有了明显的提高.实验中，一种圆形扫描结构的光声成像装置，用于180°的有限场扫描，利用改进的同步迭代算法，重建出了高对比度和高分辨率（60μm）的鸡胚胎光声血管图像.实验证明，这种算法的应用，大幅度减少了数据采集时间，为光声成像技术运用于实时监测血流灌注和肿瘤光动力治疗的血管损伤效应提供了潜在的应用价值. 关键词： 光声成像 有限角度 代数迭代算法 光声血管成像     

（Ti,Al）N Film on Normalized T8 Carbon Tool Steel Prepared by Pulsed High Energy Density Plasma Technique

Under optimized operating parameters, a hard and wear resistant （Ti,Al）N film is prepared on a normalized T8 carbon tool steel substrate by using pulsed high energy density plasma technique. Microstructure and composition of the film are analysed by x-ray diffraction, x-ray photoelectron spectroscopy, Auger electron spectroscopy and scanning electron microscopy. Hardness profile and tribological properties of the film are tested with nano- indenter and ring-on-ring wear tester, respectively. The tested results show that the microstructure of the film is dense ahd uniform and is mainly composed of （Ti,Al）N and A1N hard phases. A wide transition interface exists between the film and the normalized T8 carbon tool steel substrate. Thickness of the film is about lO00nm and mean hardness value of the film is about 26 GPa. Under dry sliding wear test conditions, relative wear resistance of the （Ti, Al）N film is approximately 9 times higher than that of the hardened T8 carbon tool steel reference sample. Meanwhile, the （Ti,Al）N film has low and stable friction coefficient compared with the hardened T8 carbon tool steel reference sample.     

Surface modification of polytetrafluoroethylene film using single liquid electrode atmospheric- pressure glow discharge

Polytetrafluoroethylene films are treated by room temperature helium atmospheric pressure plasma plumes, which are generated with a home-made single liquid electrode plasma device. After plasma treatment, the water contact angle of polytetrafluoroethylene film drops from 114°to 46°and the surface free energy increases from 22.0 mJ/m2 to 59.1 mJ/m2. The optical emission spectrum indicates that there are reactive species such as O2+ , O and He in the plasma plume. After plasma treatment, a highly crosslinking structure is formed on the film surface and the oxygen element is incorporated into the film surface in the forms of -C-O-C-, -C=O, and -O-C=O groups. Over a period of 10 days, the contact angle of the treated film is recovered by only about 10 , which indicates that the plasma surface modification is stable with time.     

SHS等离子喷涂制备FeAl2O4-Al2O3-Fe纳米复合涂层的研究

利用SHS等离子喷涂技术,将经过机械团聚法制备的Fe2O3-Al复合粉体送入等离子焰流,沉积出厚度约为400 μm的复合涂层.利用XRD,SEM 和TEM等检测手段对涂层的成分和组织进行了分析,测定了涂层的显微硬度、断裂韧性以及耐磨性.结果表明涂层为具有纳米结构的FeAl2O4-Al2O3-Fe纳米复合组织;涂层的显微硬度为HV100g870;断裂韧性是普通Al2O3涂层的2倍;无润滑磨损的耐磨性是普通Al2O3涂层的2.5倍.     

Influence of ion species ratio on grid-enhanced plasma source ion implantation

Grid-enhanced plasma source ion implantation (GEPSII) is a newly proposed technique to modify the inner-surface properties of a cylindrical bore. In this paper, a two-ion fluid model describing nitrogen molecular ions N_2^+ and atomic ions N^+ is used to investigate the ion sheath dynamics between the grid electrode and the inner surface of a cylindrical bore during the GEPSII process, which is an extension of our previous calculations in which only N_2^+ was considered. Calculations are concentrated on the results of ion dose and impact energy on the target for different ion species ratios in the core plasma. The calculated results show that more atomic ions N^+ in the core plasma can raise the ion impact energy and reduce the ion dose on the target.     

Photoacoustic characteristics of lipid-rich plaques under ultra-low temperature and formaldehyde treatment

Photoacoustic imaging(PAI) has been used to characterize the spatial and quantitative features of lipid-rich atherosclerotic plaques with high sensitivity and specificity. In this Letter, we first validate that the ultra-low temperature and formaldehyde treatment have no effect on photoacoustic characteristics of the artery samples.Comparative experiments between the PAI and histological results demonstrate that the ultra-low temperature or formaldehyde treatment has few effects on the PAI of the lipid-rich atherosclerotic plaques; the lipid relative concentration and the lipid percentage by PAI hold high correlation with histology.