左Clifford半群的特征与结构

作为Clifford半群的推广,本文定义了左Clifford半群,给出了它的许多特征,建立了它的半格分解结构和ξ直积结构。还讨论了两类特殊情形。     

一类阿基米德半群的构造及其同余格

本文引入同底的π-左、右零半群的夹群积并用来刻划带本原幂等元的阿基米德半群的构造.文中讨论了有限阶阿基米德半群的同余格,并证明了当有限阶阿基米德半群的正则R,L类的个数不超过5时,它的同余格是半模格.     

衬钽管石墨炉原子吸收法测定痕量镓时基体改进剂的研究及应用

提出用钒和铜混合基体改进剂衬钽管石墨炉原子吸收测定镓的方法。衬钽管使镓的灵敏度提高6倍左右,钒和铜混合基体改进剂不仅能进一步提高灵敏度,而且能提高灰化温度,降低原子化温度,增强抗干扰能力。测定 GSD 标准样品中的镓时,不需对样品进行预分离即可直接进行测定,结果与参考值相符。     

四种硝基苯的电化学行为及其反应活性的理论计算

在滴汞电极上研究了硝基苯、对硝基甲苯、间二硝基苯及2，4-二硝基氯苯的电化学行为，并用量子理论对四种硝基苯化合物的反应活性进行了预测，理论与试验结果基本一致，据此提出了预测分子的电化学活性的方法。     

微量元素与中医辩证分型

通过对两间小学639名学生进行微量元素检测及体格检查，并进行中医辩证分型，发现广州市部份小学生体内微量元素缺乏较严重，占体检总人数的62．3％，同时也存在营养不良，贫血、佝偻病，急慢性上呼吸道炎等、按中医辩证分型有肝热、脾气虚弱、肝血不足、肾气虚等，本文试从微量元素缺乏与中医辩证中找出两者之间的联系，以便于指导治疗，提高小学生的健康水平，增强体质和智力。     

共轭高分子的研究——Ⅶ.脂肪腈类的聚合

<正> 聚腈作为新的一类共轭高分子而引起注意。本文在前报的基础上进一步选择了一系列脂肪腈(乙腈、丙腈、戊腈、庚腈和苯乙腈),系统地研究它们在络合能力较强的付氏试剂(BF_3和TiCl_4等)作用下的聚合反应与机理,同时测定了各聚腈的物理性能。 1.腈的络合聚合 腈类与付氏试剂可形成定组成的络合物结晶:     

Highly Efficient One-Pot Synthesis of 2-Arylmethyl N-Substituted Anilines via Yb（OTf）3 Catalyzed Three-Component Reaction

An efficient method has been developed for one-pot three-component coupling reactions of various aldehydes, 1-cyclohexen-2-one, and primary or secondary amines in the presence of a catalytic amount of Yb（OTf）3 under mild conditions to afford the corresponding 2-arylmethyl N-substituted anilines in good yields. In addition, the catalyst was easily recovered and could be reused for at least four cycles without any loss of activity.     

热力强迫下斜压大气的多平衡态与副热带高压

本文用Lorenz的湿模式,在低谱简化下得到了描述大气运动的非线性耗散系统,讨论了在热力强迫与大气环流的非线性相互作用下,湿、斜压大气在参数空间的多平衡态与副热带高压冬、夏流型的转换及其东西振荡,并与相应的干模式进行比较。结果表明:副热带高压冬、夏流型的转换是一种不连续跳跃现象,是经过流场上的快速调整重建新的流型的过程。在干模式中反映不出副热带高压中心的东西摆动,而在湿模式中,由于引入了水汽的热力效应,体现了流场与加热场的非线性相互作用,促成了副热带高压中心的东西摆动。     

α-羰基硫代甲酰胺与溴的反应研究

报道了α 羰基硫代甲酰胺与溴在三乙胺存在下的反应 ,合成了二 [( 1 芳基亚胺基 1 苯甲酰基 )甲基 ]二硫醚类化合物 ,产率为 60 %～ 65 %.它们的结构经元素分析、红外光谱、核磁共振光谱和质谱分析得到确证     

Impact Responses of Prismatic Lithium-Ion Battery Based on the Membrane Factor Method北大核心CSCD

Aimed at the internal short circuit problem due to large deformation of the prismatic lithium-ion battery cell under impact loadings, a simplified battery model was first established. Then the motion equations of velocity and displacement based on the membrane factor method were proposed. With the effects of the face-sheet thickness and the densification region on the normalized final deflection, impact response characteristics of prismatic battery cells were investigated in detail. The results show that, the improved motion equations involving the membrane factor can reflect the dynamic response mechanisms of the prismatic battery cell under impact loadings, and the large deflection under high-speed impact can be predicted. With the increase of the face-sheet thickness, the deflection of the battery cell’s lower part decreases obviously. However, the densification region expands with the face-sheet thickness. The deflection and the densification region of the cell’s lower part both increase with the inner core density of the battery. This proposed impact model provides a theoretical guidance for the multi-functional integrated dynamic design of prismatic battery cells. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.