金属颗粒-半导体膜Cu:CdS的制备及结构研究

利用磁控溅射产生金属Cu团簇，同时蒸发半导体介质CdS，将Cu团簇包埋在CdS介质中，制备出金属颗粒 半导体膜．团簇大小可通过改变溅射气压控制．用TEM研究了嵌埋团簇的结构．分析表明：CdS很好地包埋了Cu团簇，都呈多晶结构；团簇尺寸在5—20nm，Cu晶格发生了膨胀，膨胀量在7%左右 关键词：     

薄膜界面粗糙对双晶摇摆曲线的影响

用X射线衍射动力学理论,模拟计算InP衬底上InGaAs/AllnAs超晶格和InGaAs单层膜的X射线双晶摇摆曲线,计算结果表明:薄膜界面粗糙对单层膜的衍射峰和超晶格的零级衍射峰影响较小,但却明显影响单层膜衍射干涉条纹和超晶格的±1级卫星峰,随着平均界面粗糙度的增大,单层膜衍射干涉条纹强度减弱并趋于消失;超晶格的±1级卫星峰变弱并逐渐展宽,理论计算的模拟双晶摇摆曲线与超晶格实验曲线比较表明:高质量匹配In_0.53Ga_0.47As(85?)/Al_{0.4 关键词：}     

A Two-Dimensional Photonic Crystal Slab Mirror with Silicon on Insulator for Wavelength 1.3μm

A concrete two-dimensional photonic crystal slab with triangular lattice used as a mirror for the light at wavelength 1.3μm with a silicon-on-insulator （SOI） substrate is designed by the three-dimensional plane wave expansion method. For TE-like modes, the bandgap in the Г-K direction is from 1087nm to 1559nm. The central wavelength in the bandgap is about 1.3μm, hence the incident light at wavelength 1.3μm will be strongly reflected. Experimentally, such a photonic crystal slab is fabricated on an SOI substrate by the combination of EBL and ICP etching. The measurement of its transmission characteristics shows the bandgap edge in a longer wavelength is about 1540 nm. The little discrepancy between the experimental data and the theoretical values is mainly due to the size discrepancy of the fabricated air holes.     

MeV微集团束与物质的相互作用

简述了有关MeV微集团离子束与物质表面相互作用研究的概况．介绍了在北京大学技术物理系和重离子物理所１．７ＭＶ串列加速器上开展的有关实验研究及取得的初步结果． The recent development on investigation of MeV microcluster beam interaction with matter is outlined. And based on 5SDH 2 Pelletron of Peking University, some relative experimental results, such as identification and Rutherford backscattering measurement of MeV carbon cluster ions, stopping power of MeV silicon microcluster ions in Al film, damage producted in silicon by MeV silicon microcluster irradiation, etc. are briefly introduecd.     

Accelerated Hydrolysis of p-Nitrophenyl Picolinate Catalyzed by Metallomicelle Made from a Novel Macrocyclic Polyamine Copper（Ⅱ） Complex

A copper（Ⅱ） complex 1 of a novel macrocyclic polyamine ligand with hydroxylethyl pendant groups, 4,11-bis（hydroxylethyl）-5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane （L） has been synthesized and characterized. Rate enhancement for hydrolysis of p-nitrophenyl picolinate （PNPP） catalyzed by 1 was studied kinetically under Brij35 micellar condition. For comparision, the catalytic activity of corresponding copper（Ⅱ） complex 2 of non-substituted macrocyclic polyamine ligand, 5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraaza-cyclotetradecane （L＇） toward the hydrolysis of PNPP was also investigated. The results indicate that the macrocyclic polyamine copper（Ⅱ） complex 1 effectively catalyzed the hydrolysis of PNPP, and the pendant ligand hydroxyl group or deprotonated pendant ligand hydroxyl group can act as catalytically active species in the reaction. A ternary Complex kinetic model involving metal ion, ligand and substrate has been proposed, and the results confirmed the reasonability of such kinetic model.     

~(14)N ENDOR Study on Bis(2-Hydroxylphenyl Ketoxime)-~(63)Cu(Ⅱ) Complex

The ENDOR spectrum of ~(14)N-~(63)Cu-HAP complex in DMSO/EtOH (5:1) freezing solution at 20 K has been studied using orientational selective method in this paper. The anisotropic superhyperfine coupling tensor and qusdrupole coupling tensor of ligand ~(14)N nucleus, and the superhyperfine coupling tensor of various ~1H nuclei have been measured precisely. Comparing the superhyperfine coupling tensor of ~(14)N-nucleus with previous work shows that the analytical method of spectrum is reasonable and the data are reliable in our previous work.     

荧光光度法直接测定环境水中苯酚和十二烷基苯磺酸钠的含量

本文研究了用荧光分光光度法直接测定环境水中苯酚和十二烷基苯磺酸钠（ＳＤＢＳ）二种水中污染物。在ｐＨ〉１１直接测定ＳＤＢＳ含量，波长为λｅｘ／λｅｍ＝２３０／２９５ｎｍ，检出限４．４ｎｇ／ｍＬ，线性范围０￣２．２μｇ／ｍｌ。在ｐＨ＝６，波长为λｅｘ／λｅｍ＝２３０／２９５ｎｍ，测得二者合量，从合量中减去ＳＤＢＳ含量即得苯酚含量，检出限４．０ｎｇ／ｍｌ，线性范围０￣０．８５μｇ／ｍＬ，回收率达９９％￣     

双原子分子在啁啾激光作用下的经典解离

采用辛算法及经典理论方法,计算了HF分子在啁啾激光作用下的经典解离,讨论了解离几率随激光强度的变化,以及在相同激光强度下,选取不同的振动态作为初始态时解离几率的变化.     

电爆炸法制备纳米颗粒收集方法

金属丝电爆炸法制备纳米材料因其负载可大程度的过热和爆炸产物非平衡扩散过程得到了研究人员的广泛关注,认为是制备新型功能材料的有效方法。研究了不同收集方法对电爆炸法制备钛纳米颗粒的影响,并结合电学、光学、自辐射图像和形貌分析等诊断手段分析了不同方法下产物特性的成因。结果表明,钛丝电爆炸呈现周期型放电模式,产物通道在放电结束前（约40 μs）可膨胀至约1.7 cm处,此后有尖状突刺发展（波阵面后湍流区）,其速度约为55 m/s。为研究爆炸产物不同状态下纳米颗粒形成特性,使用了3种不同的产物收集方法,分别为:①在金属丝径向1.5 cm处放置硅片收集;②在腔体出口处预置滤网收集;③在金属丝一侧电极上通过定向喷涂收集。产物形貌表征结果表明,使用不同收集方法时产物特征存在明显差别,前2种方法爆炸产物先与介质混合再沉积于硅片,得到的产物分别为分散、链状的球状纳米颗粒和密集、堆叠的纳米颗粒团簇;后一种方法电爆炸产物具有较高的密度和定向速度（对硅片）,硅片以金属丝为轴心远近呈现出粉末状和烧结块状两种不同形式。     

等离子体微带开关特性

 提出一种基于微放电等离子体的微带开关。它是以“时变等离子体”取代微带线射频微机电开关的“金属悬臂”,利用等离子体的导体或介质特性使电磁波沿其表面进行传输或截止,从而实现微带线上电磁波传输的动态控制。等离子体微带开关的基本结构包括用以隔断电磁波的微带间隙和产生片状等离子体的放电装置。放电产生时,电磁波因等离子体导体性通过开关,形成“开”状态;放电停止后,电磁波被微带间隙反射,形成“关”状态。利用CST软件仿真研究了等离子体开关特性,结果表明：这种开关的带宽由等离子体密度决定,隔离度由间隙决定,而工作插损与等离子体密度和电子碰撞频率有关。等离子体位形（宽度、厚度等）对于开关性能也非常重要。