Magnetic and magneto-optical properties of CoFeCrSiB amorphous ribbons

In this paper we investigate the surface magnetic properties of as-quenched (AQ) CoFeCrBSi ribbons prepared by planar flow casting method with using magneto-optic Kerr effect (MOKE). Measured hysteresis loops in longitudinal and transversal configurations enable us to obtain the information of ribbons surface magnetic properties. Moreover, we suggest new magneto-optic method, which is based on measurements of magneto-optical effects depending on DC current flowing through the ribbon. Experimental data of AQ ribbons are then compared with the model, which describes the influence of incidence angle on magneto-optical angles.     

On a certain two-sided symmetric condition in magnetic field analysis and computations

A special two-sided condition for the incremental magnetic reluctivity is introduced which guarantees the unique existence of both the weak and the approximate solutions of the nonlinear stationary magnetic field distributed on a region composed of different media, as well as a certain estimate of the error between the two solutions. The condition, being discussed from the physical as well as the mathematical point of view, can be easily verified and is fulfilled for various magnetic reluctivity models used in electrotechnical practice.     

Three-pencil lattices on triangulations

In this paper, three-pencil lattices on triangulations are studied. The explicit representation of a lattice, based upon barycentric coordinates, enables us to construct lattice points in a simple and numerically stable way. Further, this representation carries over to triangulations in a natural way. The construction is based upon group action of S ₃ on triangle vertices, and it is shown that the number of degrees of freedom is equal to the number of vertices of the triangulation.      

Study of the order–disorder transition and martensitic transformation in a Cu–Al–Be alloy by EELS

Changes in 3d states occupancy associated with order–disorder transition and martensitic transformation in a Cu–Al–Be alloy was investigated by electron energy loss spectroscopy (EELS) in both high energy and low energy loss regions. From the high energy loss region, the Cu L_2,3 white-line intensities, which reflect the unoccupied density of states in 3d bands, was measured for three states of the alloy: disordered austenite, ordered austenite and martensite. It was found that the white-line intensity remains the same during order–disorder transition but appears slightly smaller in martensite, indicating that some electrons left Cu 3d bands or some hybridization took place during phase transformation. From the low energy loss region, the optical joint density of states (OJDS) was obtained by Kramers–Kronig analysis. As maxima observed in the OJDS spectra are assigned to interband transitions, these spectra can be used to probe changes in the electronic band structure. The analysis shows that during the martensitic transformation, the peaks positions and relative intensities in the OJDS spectra undergoes noticeable changes, which are associated with interband transitions.     

Hypernuclear production with a strong spin-flip

A kinematically correct treatment of the full transition amplitude for many-body hypernuclear production is presented. By an example of (⁺, K⁺) reaction, effects of the spin-flip amplitude and its interference with the spin-non-flip amplitude are demonstrated and specified for ¹² C.Dedicated to Academician Václav Votruba on the occasion of his eightieth birthday.The discussions with many colleagues are appreciated, in particular those with R. Mach, L. Majling and T. Motoba were of much use.     

Interpretation of toroidal current and loop voltage temporal evolution during RF-current drive experiment on the T-7 tokamak

A simple analytical model is developed and solved to describe time evolution of the loop voltage and toroidal current when RF and inductive current drive take place simultaneously. A relation for the real value of the RF driven current has been obtained under these conditions. Comparison with experimental data from T-7 tokamak allows to estimate the role of the skin effect during RF current drive.The authors would like to thank A. Ya. Kislov for the basic data on the T-7 tokamak transformer. They are also indebted to V. V. Parail and G.V. Pereverzev for many clarifying discussions.     

Size evolution of the vibrational predissociation process in Br2...Nen clusters: simulation and kinetic study

A hybrid quantum-classical simulation of the vibrational predissociation of Br2...Nen, (n = 2-11) clusters in the B electronic state is carried out. The time-evolution of the reactants, products, and intermediates is analyzed by a kinetic mechanism consisting of three elementary steps: direct vibrational predissociation (VP), intramolecular vibrational redistribution (IVR), and evaporative cooling (EC). The importance of intramolecular vibrational redistribution followed by evaporative cooling relative to direct vibrational predissociation is shown to increase rapidly with increasing cluster size. Final product state distributions reveal that only one or less Br2 stretching quantum per neon atom is required in order to achieve complete dissociation (n quanta for n < or = 9 and n - 1 for n = 10 and 11). The proportion of available energy going into translation is proposed as a parameter to study the statistical behavior of the Van der Waals clusters. It is shown to depend only on the number of remaining degrees of freedom, a characteristic of a statistical behavior, for n > or = 3.     

Estimation scheme for level-dependent uncertainty of analytical result: application for determination of 1-hydroxypyrene in urine

The estimation scheme of uncertainty of determination of 1-hydroxypyrene (1-OHP) in urine was developed analysing the main stages of the analytical procedure: (1) preparation of 1-OHP standards, (2) creation of the calibration curve for the high performance liquid chromatography (HPLC) analysis method with the evaluation of recovery, (3) measuring procedure of aliquot of urine, (4) adjusting the pH of aliquot and hydrolysis with enzyme, (5) solid phase extraction, (6) concentration of the extract, (7) injection of the extract to chromatograph and analysing by the HPLC method, (8) calculation of 1-OHP mass from the calibration curve, (9) calculation of 1-OHP concentration in urine. The evaluation of the uncertainty is based on quantification of individual components. Combined uncertainty was calculated using the law of propagation of uncertainties according to the EURACHEM/CITAC guidelines. Level dependence of the uncertainty arises from the calibration curve. The limits of detection and quantification were found to be equal to 0.03 and 0.1 ng/mL, respectively. The calculated expanded level-dependent uncertainty covers 47–27–25% within the concentration range 0.03–0.1–0.4 ng/mL with the materials and equipment used. These parameters could easily be recalculated according to the proposed scheme if there are some changes in the analysis procedure.     

Comparative thermal analysis of commercial and low-grade bauxites

This paper presents qualitative and quantitative comparative results on the simultaneous TG-DTG DTA of five commercial and low-grade bauxites. The methodology of qualitative determination of the basic mineral forms contained in bauxites is currently being established. The weight losses relating to the steps in the TG curve allow determination of the contents of the basic minerals in bauxite. These are recalculated as percentages of Al₂O₃, SiO₂, CaO moisture and total volatiles. The final results are in accordance with the results of classical chemical analyses, and this jusitifies the use of this technique as a quick method for qualitative and quantitative determinations of both commercial and low-grade bauxites.

---

Zusammenfassung Qualitative und quantitative Ergebnisse vergleichender simultaner TG-DTG-DTA-Untersuchungen an 5 kommerziellen und geringwertigen Bauxiten werden vorgestellt. Die Methodologie der qualitativen Bestimmung der wichtigsten im Bauxit enthaltenen Minerale wird ausgearbeitet. Die Gewichtsverluste bei den entsprechenden TG-Stufen erlauben die Berechnung der Gehalte an den wichtigsten Mineralen. Diese werden umgerechnet in die Anteile an Al₂O₃, SiO⁰², CaO, Feuchtigkeit und Glühverlust. Letztere Resultate stimmen mit denen klassisch-chemischer Analyse überein. Das erlaubt die Anwendung thermoanalytischer Methoden als Schnellverfahren für qualitative und quantitative Bestimmungen in kommerziellen und geringwertigen Bauxiten.

---

, . , . , , , . , , .