Illustration of a simple and versatile scheme for reversing enantiomeric elution order and facilitating enantiomeric impurity determination in capillary electrophoresis

Determination of enantiomeric purity is most often done under overload conditions, which leads to deformed peaks. In general, the best resolutions are obtained when the small peak appears before the large peak in the electropherogram. To be able to determine the R(+)-impurity in the S(-)-form as well as the S(-)-impurity in the R(+)-form the elution orders have to be reversed. The present paper describes reversal of enantiomeric elution order for the basic analyte propranolol and the acidic analyte ibuprofen. For propranolol, a charged heptakis-(6-sulfo)-beta-cyclodextrin (CD) is used in the background electrolyte. For ibuprofen, a mix of the charged heptakis-(6-sulfo)-beta-CD and the uncharged heptakis-(2,3,6-tri-O-methyl)-beta-CD is used in the background electrolyte. The use of a coated capillary and reversal of the polarity shift the elution order, buffer composition is unchanged in both cases. The enantiomers of propranolol and ibuprofen are well separated on both the coated and uncoated capillaries. Detection limits of enantiomer impurities are investigated using spiked samples of both propranolol and ibuprofen.     

Supported Liquid Membrane Work-Up of Blood Plasma Samples Coupled On-Line to Liquid Chromatographic Determination of Basic Antidepressant Drugs

An automated sample pretreatment of human blood plasma for liquid chromatographic determination of three antidepressant drugs, dibenzepine; a tricyclic antidepressant (TCA), reboxetine; a selective noradrenaline reuptake inhibitor (SNRI) and fluvoxamine; a selective serotonin reuptake inhibitor (SSRI), based on supported liquid membrane (SLM) for unsurpassed sample clean-up and analyte enrichment, has been developed. The chromatograms after enrichment of plasma blank and aqueous blank are virtually indistinguishable. The entire analytical procedure revealed good linearity and low detection limits of 5, 15 and 20 ng mL^–1 for dibenzepine, reboxetine and fluvoxamine, respectively. No carry-over effects were noted. The repeatability of extraction at three concentrations in the range 40–150 ng mL^–1 for the three drugs was between ca. 3% and 7% as relative standard deviation. The reproducibility relative standard deviation during three different days (replacing the membrane each day) was not significantly higher.     

Supplementary d and f functions in molecular wave functions: Optimum and nonoptimum exponents

Energy optimization calculations have been carried out to determine the variability of optimum p, d, and f polarization function exponents in molecules containing first- and second-row elements and in normal valency and hypercoordinate species. Optimum exponents were determined for single sets of higher-order functions at both Hartree–Fock and correlated (Moller–Plesset) levels of theory using the Dunning–Hay double zeta and the McLean–Chandler triple zeta basis sets. More detailed calculations were used to test the response to nonoptimum d and f function exponents of the total energy, the optimum geometry, and harmonic stretching frequencies. The variability in optimum exponents and the size of the energy penalties incurred by adopting nonoptimum values reduces the utility of standard exponents for p, d, and f polarization functions. © 1993 John Wiley & Sons, Inc.     

Thermodynamics of micellar solubilization of various water-insoluble dyes

Summary A linear relation between the free energy of micellar solubilization,G _s ⁰ , and surfactant alkyl chain length is shown. This relation is found to be valid for various water-insoluble dyes in different homologous series of surfactants. It is further shown that the change inG _s ⁰ per added CH₂ group is constant in these various systems, within the experimental accuracy.

---

Zusammenfassung Es wurde gezeigt, daß zwischen der freien Energie der mizellaren SolubilisierungG _s ⁰ und der Alkylkettenlänge des Tensids eine lineare Beziehung besteht. Diese Beziehung gilt für verschiedene wasserunlösliche Farbstoffe mit verschiedenen homologen Reihen von Tensiden. Es wird weiterhin gezeigt, daß die Änderung vonG _s ⁰ pro CH₂-Gruppe in diesen verschiedenen Systemen innerhalb der experimentellen Fehlergrenze konstant ist.

---

---

With 1 figure and 1 table     

Determination of aliphatic amines in air by membrane enrichment directly coupled to a gas chromatograph

Summary A method is described for the determination of shortchain aliphatic amines in ambient air based on impinger sampling in dilute H₂SO₄, selective enrichment across a PTFE gas membrane and quantification by gas chromatography. The enrichment step is carried out in a flow system directly connected to the chromatograph. The separation is performed on a packed column with nitrogen selective detection. The enrichment per sample volume was in the range 7.3 to 8.2 mL^–1 for C₁–C₆ amines. Detection limits were ca 3–10 nM with enrichment of a 2.9 mL liquid sample. After impinger sampling of 5 m³ air in 10 mL absorption solution, this corresponds, to 0.4–0.8 ng/m³ (ca 0.2–0.5 ppt by volume) in air.     

Upper limit for thermal direct photon production in heavy-ion collisions at 60 and 200A·GeV

The production of direct photons has been investigated in reactions ofp and¹⁶O projectiles at 60 and 200A·GeV with C and Au nuclei. Photon and ⁰ spectra have been measured in the pseudorapidity range 1.52.1 for the transverse momentum region 0.4 GeV/cp _T 2.8 GeV/c employing the lead-glass spectrometer SAPHIR. An upper limit of 15% at the 90% confidence level for the direct photon signal relative to the neutral pion production is obtained from the comparison of measured photon spectra with Monte Carlo simulations of the hadronic background based on the reconstructed yield of ⁰ and mesons. Consequences for a possible phase transition to a quark-gluon plasma are discussed.     

Computational convergence of electronic structure calculations of transition metal ligand complexes

Calculations of binding energies and optimum geometries of compounds of the series M(H₂O)⁺ with M = Sc to Zn have been carried out and compared with gas-phase experimental data and with the Rosi and Bauschlicher MCPF calculations. Hartree–Fock calculations and correlated calculations at MP2, MP4, and QCISD(T) levels were used to test the dependence of the results upon the level of correlation. A test of basis set dependence was also carried out, using parallel calculations on four basis sets ranging in size from a small DZ set to a TZ contraction. Correlation levels above MP2 and elaboration of the metal d-function basis set to (4d/3d) size or greater were both necessary for convergence with the most uniformly reliable results obtained from QCISD(T) calculations on a basis set with a (6d/4d) contraction for the d-function space. However, MP2 or higher-level calculations with a contracted four or five d function set [(5d/3d) or (4d/3d)] are capable of yielding results on binding energies and geometries close to the current gas-phase experimental uncertainty on electrostatically bound transition metal complexes. © 1993 John Wiley & Sons, Inc.     

Retention in coupled capillary column supercritical fluid chromatography with lipids as model compounds

Summary We have investigated to which extent retention data, acquired on single capillary columns, can be used for predicting retention factors in a coupled column system. For this purpose we utilized a model mixture of 18 lipid components with widely different vapor pressures and polarities. The sample was chromatographed on two columns, SB-biphenyl-30 (70% methyl-30% biphenylpolysiloxane) and SB-cyanopropyl-50 (50% methyl-50% cyanopropylsiloxane). Experimental retention factors, acquired in coupled column systems with two columns connected in different order, were thus compared with values calculated from runs on each single column. The agreement between calculated and experimental values generally was better than 5% without any pressure drop correction.To study the possibility of predicting retention behavior in a wide pressure range from a limited number of experiments, we also investigated the relation between solute retention and mobile phase density. We found that all data could be fitted to second order equations, which gives the possibility to optimize the resolution with respect to pressure from a limited number of runs at different pressures.     

New insights into the mechanisms behind the strengthening of lignocellulosic fibrous networks with polyamines

Polyelectrolytes have been used extensively in the papermaking industry for various purposes. Although recent studies have shown that polyamines can be efficient dry-strength additives, the mechanism governing the strength enhancement of paper materials following the adsorption of polyamines onto pulp fibres is still not well understood. In this study, the effect of the adsorption of polyallylamine hydrochloride (PAH) onto the surface of unbleached kraft pulp fibres was investigated on both the fibre and the network scale. Isolated fibre crosses were mechanically tested to evaluate the impact of the chemical additive on the interfibre joint strength on the microscopic scale and the effect was compared with that previously observed on the paper sheet scale. X-ray microtomography was used to understand structural changes in the fibrous network following the adsorption of a polyamine such as PAH. Using image analysis methods, it was possible to determine the number of interfibre contacts (or joints) per unit length of fibre as well as the average interfibre joint contact area. The results showed that the median interfibre joint strength increased by 18 % upon adsorption of PAH. This can be achieved both by a larger molecular contact area in the contact zones and by a stronger molecular adhesion. The addition of the polymer also increased the number of efficient interfibre contacts per sheet volume. This combination of effects is the reason why polyamines such as PAH can increase the dry tensile strength of paper materials.