Acoustic reflection from a baffled elastic/piezoelectric plate

A finite difference/boundary integral procedure to determine the acoustic reflected pressure from a fluid-loaded bi-laminated plate is described. The bi-laminate is composed of a piezoelectric layer and an elastic layer in contact with the fluid, and is held by an acoustically hard baffle. In the numerical model, the fluid pressure at fluid/solid interface is replaced by a continuum of point sources weighted by the normal acceleration of the elastic plate, and the governing equation system is solved in the solid domain. With the normal acceleration found, the reflected pressure in the fluid is determined by an integral expression involving the Green's function. It is demonstrated that an appropriate applied voltage potential across the piezoelectric layer has the effect of cancelling either the reflected or scattered pressure of the plate at any chosen field points in the fluid. Project supported by the National Natural Science Foundation of China (No. 10172039).     

Viscoelastic behavior of polypropylene/nitrile rubber thermoplastic elastomer blends: Application of Kerner's models for reactively compatibilized and dynamically vulcanized systems

The viscoelastic properties of binary blends of nitrile rubber (NBR) and isotactic polypropylene (PP) of different compositions have been calculated with mean‐field theories developed by Kerner. The phase morphology and geometry have been assumed, and experimental data for the component polymers over a wide temperature range have been used. Hashin's elastic–viscoelastic analogy principle is used in applying Kerner's theory of elastic systems for viscoelastic materials, namely, polymer blends. The two theoretical models used are the discrete particle model (which assumes one component as dispersed inclusions in the matrix of the other) and the polyaggregate model (in which no matrix phase but a cocontinuous structure of the two is postulated). A solution method for the coupled equations of the polyaggregate model, considering Poisson's ratio as a complex parameter, is deduced. The viscoelastic properties are determined in terms of the small‐strain dynamic storage modulus and loss tangent with a Rheovibron DDV viscoelastometer for the blends and the component polymers. Theoretical calculations are compared with the experimental small‐strain dynamic mechanical properties of the blends and their morphological characterizations. Predictions are also compared with the experimental mechanical properties of compatibilized and dynamically cured 70/30 PP/NBR blends. The results computed with the discrete particle model with PP as the matrix compare well with the experimental results for 30/70, 70/30, and 50/50 PP/NBR blends. For 70/30 and 50/50 blends, these predictions are supported by scanning electron microscopy (SEM) investigations. However, for 30/70 blends, the predictions are not in agreement with SEM results, which reveal a cocontinuous blend of the two. Predictions of the discrete particle model are poor with NBR as the matrix for all three volume fractions. A closer agreement of the predicted results for a 70/30 PP/NBR blend and the properties of a 1% maleic anhydride modified PP or 3% phenolic‐modified PP compatibilized 70/30 PP/NBR blend in the lower temperature zone has been observed. This may be explained by improved interfacial adhesion and stable phase morphology. A mixed‐cure dynamically vulcanized system gave a better agreement with the predictions with PP as the matrix than the peroxide, sulfur, and unvulcanized systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1417–1432, 2004     

Charge plate technique in recoil study: Evidence for collection of recoil charged species from solid targets on metal electrodes

The occurrence of charge on recoil⁵⁶Mn produced by the (n,γ) reaction in polycrystalline potassium permanganate has been examined using the ‘charge plate technique’. From considerations of capture gamma ray decay schemes and internal conversion it appears that, in a condensed medium, the recoil atom develops charge after losing much of its initial kinetic energy which allows collection on charged electrodes. Preliminary findings were presented at the International Symposium on Radiochemistry and Radiation Chemistry, RC-41 BARC, Bombay, Feb. 4–6 (1991).     

PHASE INVERSION AND ITS MECHANICAL MODEL STUDIES FOR THE TWO-PHASE POLYMER BLEND SYSTEMS (Ⅱ)——DYNAMIC VISCOELASTIC RESPONSE

The dynamic viscoelastic response of the two-phase polymer blend systems shows the characteristics of the thermorheologically complex materials. In this paper theoretical equations for describing the dynamic viscoelastic response of such polymer blend systems have been established by means of the mechanical modeling technique. The dynamic viscoelastic response of the blend systems at any blend composition can be predicted theoretically by using the equations established, provided that the dynamic viscoelastic response of the two pure components and the mechanical model parameters are known in advance. Thus, we provide an effective method for studying the dynamic mechanical properties and the molecular relaxation characteristics of the two-phase polymer blend systems.     

微通道板表面发雾的AES分析

应用俄歇电子能谱对微通道板表面发雾区域进行分析。分析结果表明,发雾区碳含量比正常区高三倍。由此可推测出,发雾是由碳污染引起的,而这种碳污染很可能是残留于微通道板上的某些有机物在烧氢时碳化所致。     

Using transient and steady-state SEA to assess potential errors in the measurement of structure-borne sound power input from machinery on coupled reception plates

Isolated reception plates provide an engineering approach to quantify the structure-borne sound power input from machinery through the measurement of the spatial-average velocity level and structural reverberation times. For applications in building acoustics there are practical and economic reasons to consider using coupled reception plates formed by solid heavyweight walls or floors that are structurally coupled to other building elements. This paper uses transient and steady-state statistical energy analysis to investigate how the errors depend upon the building structure to which the coupled reception plate is connected. It is shown that the problem is twofold. Firstly, in the low- and mid-frequency ranges, the steady-state velocity level on the coupled reception plate is increased by energy returning from other coupled plates. Secondly, the structural decays on the coupled reception plate have significant curvature due to returning energy; hence short evaluation ranges are needed to minimise the error when determining the total loss factor. This leads to a problematic situation where the coupled reception plate appears to give the correct answer due to the error in the energy cancelling out the error in the total loss factor. The latter error can be minimised using short evaluation ranges for the structural reverberation time.     

Wavenumber space and physical space responses of a periodically ribbed plate to a point drive: A discrete approach

An efficient technique to estimate the vibration of and sound radiation from a stiffened fluid-loaded plate excited by a mechanical point force is presented. The process is based on the formulation in the wavenumber domain of the transversal displacement of the plate and of the acoustic pressure in the fluid domain. Analytical expressions can be easily obtained for these fields in the case of an infinite plate with stiffeners uniformly spaced. The approach consists then on using the discrete Fourier Transform to deduce the associated fields in the physical space. This transform necessitates truncation of the wavenumber domain and sampling of these wavenumber fields with adequate criterions to avoid loss of information and aliasing. These criterions are discussed in this paper concerning displacement point results on the plate and pressure point results in a part of the fluid domain “close to” the plate. This technique requires relatively small computing time and provides an efficient tool to analyse the vibro-acoustic behaviour of the stiffened plate, both, in the physical and the wavenumber spaces. A comparison between a case discussed in the literature and some examples are presented to illustrate the validity and interests of this approach.     

Improved pulse schemes for separated local field spectroscopy for static and spinning samples

An improved pulse sequence for SLF experiments based on the magic sandwich (MS) scheme for homo-nuclear dipolar decoupling is proposed. The sequence incorporates a double MS, both on I and S spins and has been named as EXE-MS2. The proposed scheme which has a scaling factor of 1 is observed to be free from low intensity artifacts and provides better line-widths particularly for S spins labeled at multiple sites. The pulse sequence which has been applied on static oriented samples incorporates the EXE scheme where direct polarization of the S spin in the B(0) field is utilized in the place of polarization inversion and is observed to perform well without any loss of sensitivity while ensuring considerable reduction in rf power input into the sample. The EXE scheme has also been tested for solid samples under MAS.     

Lubricated squeezing flow of a Newtonian liquid between elastic and rigid plates

Theoretical force-time relationships were derived for squeezing flow of a Newtonian liquid between lubricated rigid and elastic plates. It is shown how the elastic number, representing the ratio between the elastic plate's rigidity and the specimen's viscosity, affects the force-time curve and under what circumstances the fluid specimen's thickness becomes a significant factor. Potential implications of the analysis in oral sensory evaluations of viscous foods are also considered.     

圆薄板非对称大变形弯曲问题

本文首先导出圆薄板非轴对称大变形问题的位移基本方程及边界条件.利用变换和摄动法将非线性位移方程线性化,得到了近似边值问题.作为算例,文中研究了圆薄板在较复杂载荷作用下的非线性弯曲问题.