NMR Study of the propagation center in the cationic polymerization of N-benzoyl-8-octanelactam. II. Investigation of the propagation center

The nature of the propagation center in the cationic polymerization of N-benzoyl-8-octanelactam initiated by octanoylium hexachlcroantimonate, SbCl₅, and Ph₃CAsF₆ in perdeuterated tetrachloroethane or its mixture with o-dichlorobenzene was studied using ¹H, ¹³C, ¹⁹F, ³¹P, ⁷⁵As, and ¹²¹Sb nuclear magnetic resonance (NMR) of model oligomers and the products of their end-capping with triphenylphosphine. In all cases, the nature of the propagation center has been found to be of an acylium ion pair with an SbCl₆^? or AsF₆^? counterion coordinated with the nearest benzoylamide group and cosolvated by the solvent. © 1994 John Wiley & Sons, Inc.     

Kinetics and mechanism of polymerization of methyl methacrylate initiated by stibonium ylide

Homopolymerization of methyl methacrylate (MMA) was carried out in the presence of triphenylstibonium 1,2,3,4-tetraphenyl-cyclopentadienylide as an initiator in dioxane at 65°C±0·l°C. The system follows non-ideal radical kinetics (R _p ∝ [M]^1·4 [I]^0·44 @#@) due to primary radical termination as well as degradative chain-transfer reaction. The overall activation energy and average value ofk ₂ ^p /k _t were 64 kJmol⁻¹ and 0.173 × 10⁻³ 1 mol⁻¹ s⁻¹ respectively     

Synthesis of stable azomethine ylides by the rearrangement of 1,3-dipolar cycloadducts of 3,4-dihydroisoquinoline-2-oxides with DMAD

1-Aryl-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinolines were prepared according to a one-pot procedure involving the reaction of 2-(3,4-dimethoxyphenyl)-ethylamine with aromatic aldehydes in TFA at reflux. The tetrahydroisoquinolines were treated with H₂O₂-WO₄²⁻ in methanol at room temperature to give the corresponding 3,4-dihydroisoquinoline-2-oxides. Treatment of these cyclic nitrones with DMAD in toluene at room temperature gave the corresponding isoxazolo[3,2-a]isoquinolines. These compounds were heated in toluene at reflux to give the corresponding ylides in high yields (Method A). The effect of the substituents on the rate of the rearrangement of such compounds prompted us to discuss a new mechanism involving consecutive C-C bond heterolysis and 1,3-sigmatropic shift. A one-pot reaction involving the treatment of the nitrones with equimolar amounts of DMAD in refluxing toluene also gave the ylides (Method B). The structures of the prepared compounds were elucidated by spectral means and elemental analyses.     

富烯碳原子簇的石墨层间闭合形成机理

本文提出了富烯碳原子簇的石墨层间闭合形成机理，由该机理推出的许多结果与实验事实符合很好。我们认为碳原子簇自由基的快速淬灭及其淬灭速度是富烯碳原子簇形成及其丰度的决定因素。由此得出富烯碳原子簇在给定实验条件下产生的必然性，并预言不同大小的富烯碳原子簇可以通过优化实验条件选择性地合成。     

Anomalous hydroalumination of methyl nopol ether with a LiAlH4-3AlBr3 system

Hydroalumination of methyl nopol ether with a LiAlH₄-3AlBr₃ system is accompanied by a skeleton rearrangement and gives 6-dibromoalumo-7-methoxymethyl-2-menthene. Further hydroalumination affords a mixture of 2,6- and 2,5-bis(dibromoalumo)-7-(methoxymethyl)menthanes in 8020 ratio. Hydrolysis and oxidation of these organoaluminum compounds were carried out.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 506–510, March, 1994.     

Kinetic model ofCO oxidation on nonuniform surface analyzed regardingCOads spillover, 2. homotopic method. Effect ofm1 surface portion

The homotopic method has been used to analyze the kinetic model of three-stageCO oxidation on two nonuniform surface patches conjugated byCO ₂ spillover. Diagrams of steady states depending on the portion of surface patchm ₁ at various temperatures and pressure ratiosP(O ₂)/P(CO) have been constructed. The ratios of different type patches corresponding to the maximum overall reaction rate have been found.     

Evaluation of a Novel Dechlorination Reaction as an Analytically Useful Derivatization Reaction Part 1. Stoichiometry,Mechanism and Yield Optimization

Abstract

A novel reaction for the dechlorination of polychlorinated biphenyls (PCBs) as well as most other chlorinated aromatic and aliphatic compounds is evaluated and discussed in terms of its potential for analytical purposes. The active dechlorinating agent is prepared through the reaction of molten sodium or potassium with polyethylene glycols (MW >200), in the absence of oxygen, to form the corresponding alkali metal glycolate, a powerful nucleophilic agent. Special emphasis is given to the mechanistic aspects of the reaction and their importance in terms of achieving high and reproducible yields with analytical quantities of substrate, in short periods of time. The contribution of the techniques: ESR, NMR, IR, UV, MS, GC-ECD, LC-EC, CIDNP-NMR, conductimetry and chloride analysis (amperometric) in elucidating the reaction mechanism and providing valuable kinetic data is illustrated. This reaction can potentially be applied to the determination of PCBs in waste oils.     

High-performance optics for thermal microscopy

We have developed a thermal microscope which has an InSb detector and optics optimized for the camera. Using this system, we evaluated maximum resolution of a 30×/numerical aperture 0.71 lens made of silicon and germanium, and achieved the cutoff frequency of around 300 line pairs/mm, which is almost a diffraction-limited performance. The thermal microscope is installed on the THEMOS-1000, a product of Hamamatsu Photonics, for thermal emission analysis.     

Nucleation and growth mechanism for flame synthesis of MoO2 hollow microchannels with nanometer wall thickness

The growth and morphological evolution of molybdenum-oxide microstructures formed in the high temperature environment of a counter-flow oxy-fuel flame using molybdenum probes is studied. Experiments conducted using various probe retention times show the sequence of the morphological changes. The morphological row begins with micron size objects exhibiting polygonal cubic shape, develops into elongated channels, changes to large structures with leaf-like shape, and ends in dendritic structures. Time of probe–flame interaction is found to be a governing parameter controlling the wide variety of morphological patterns; a molecular level growth mechanism is attributed to their development. This study reveals that the structures are grown in several consecutive stages: material “evaporation and transportation”, “transformation”, “nucleation”, “initial growth”, “intermediate growth”, and “final growth”. XRD analysis shows that the chemical compositions of all structures correspond to MoO₂.     

Enhanced mechanism of catalytic ozonation by ultrasound with orthogonal dual frequencies for the degradation of nitrobenzene in aqueous solution

The experiments have been performed with a semi-continuous batch reactor to investigate the degradation efficiency of nitrobenzene in aqueous solution by ultrasound with the different orthogonal dual frequencies catalytic ozonation. The introduction of ultrasound can enhance the degradation efficiency of nitrobenzene compared to the results obtained from the processes of ozonation alone and ultrasound alone. The degradation of nitrobenzene is found to be zero-order in the two systems of ultrasound alone, and the reactions follow the pseudo-first-order kinetic model in the processes of ozone alone and ozone/ultrasound. The investigation confirms that the degradation of nitrobenzene follows the mechanism of hydroxyl radical (^•OH) oxidation, and the enhancement function is even more pronounced in the presence of ultrasound with the greater difference between the orthogonal dual frequencies due to the obvious synergetic effect between ozone and ultrasound, which increases the utilization efficiency of ozone, and accelerates the initiation of ^•OH and the formation of H₂O₂, resulting in the rapid formation of an increasing diversity of byproducts and the advancement degree of mineralization of total organic carbon (TOC). The oxidative byproducts have been, respectively identified in the different processes selected, including o, p, m-nitrophenols, phenol, malonic acid, 4-nitrocatechol, nitrate ion, maleic acid, oxalic acid, hydroquinone, p-quinone, 1,2,3-trihydroxy-5-nitrobenzene and acetic acid.