Statistical thermodynamics evaluation of polymer–polymer miscibility

The Simha and Somcynsky (S–S) statistical thermodynamics theory was used to compute the solubility parameters as a function of temperature and pressure [δ = δ(T, P)], for a series of polymer melts. The characteristic scaling parameters required for this task, P*, T*, and V*, were extracted from the pressure–temperature–volume (PVT) data. To determine the potential polymer–polymer miscibility, the dependence of δ versus T (at ambient pressure) was computed for 17 polymers. Close proximity of the δ versus T curves for four miscible polymer pairs: PPE/PS, PS/PVME, and PC/PMMA signaled the usefulness of this approach. It is noteworthy, that the tabulated solubility parameters (derived from the solution data under ambient conditions) propounded the immiscibility of the PVC/PVAc pair. The computed values of δ also suggested miscibility for polymer pairs of unknown miscibility, namely PPE/PVC, PPE/PVAc, and PET/PSF. In recognizing the limitations of the solubility parameter approach (the omission of several thermodynamic contributions), these preliminary results are auspicious because they indicate a new route for estimating the miscibility of any polymeric material at a given temperature and pressure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2909–2915, 2004     

Solution of the hyperbolic mild‐slope equation using the finite volume method

A finite volume solver for the 2D depth‐integrated harmonic hyperbolic formulation of the mild‐slope equation for wave propagation is presented and discussed. The solver is implemented on unstructured triangular meshes and the solution methodology is based upon a Godunov‐type second‐order finite volume scheme, whereby the numerical fluxes are computed using Roe's flux function. The eigensystem of the mild‐slope equations is derived and used for the construction of Roe's matrix. A formulation that updates the unknown variables in time implicitly is presented, which produces a more accurate and reliable scheme than hitherto available. Boundary conditions for different types of boundaries are also derived. The agreement of the computed results with analytical results for a range of wave propagation/transformation problems is very good, and the model is found to be virtually paraxiality‐free. Copyright © 2003 John Wiley & Sons, Ltd.     

The effect of crystallinity on chain mobility and free volume in the amorphous regions of a miscible polycarbonate/polyester blend

Homopolymers and blends of polycarbonate/ThermX have been investigated by differential scanning calorimetry, dynamic mechanical analysis, density measurements, and positron annihilation lifetime spectroscopy. The study focuses on the chain mobility and free volume in the amorphous miscible regions of the blends and how this mobility and free volume are affected by increasing crystallinity. It is proposed that judicious annealing, which results in increasing crystallinity (while avoiding ageing or transesterification), induces a constraint on the amorphous region leading to an increase in T_g and coalescence of free volume sites. © 1994 John Wiley & Sons, Inc.     

Tuning size and catalytic activity of nano-clusters of cobalt oxide

Cobalt oxides were prepared by three different methods: (1) by reacting cobalt nitrate with oxalic acid, (2) co-precipitating cobalt nitrate with sodium carbonate, and (3) using sodium dodecyl sulphate as organic surfactant. All three samples were characterized before and after calcination by solvent extraction and the resulting products examined by IR spectroscopy. In the case of method 3, the removal of surfactant was followed by TGA studies. Products from all three methods were identified by XRD. Peaks in low angle XRD indicate the porous nature of the oxides. The morphology of the pores was studied by transmission electron microscopy. Some irregular pore structures were obtained for samples from methods 1 and 2, with an average size of 4–6 nm. Only the product from method 3 using SDS as template showed ordered structure and optimum size, and Brunauer-Emmet-Teller surface areas of the as-prepared, as well as the treated samples, exhibited H3 type hysteresis. The samples from the three methods were used as catalysts in the oxidation reaction of cyclohexane under mild conditions and the catalytic efficiency of the cobalt oxide was comparable with mesoporous cobalt oxides.     

Excess and partial excess molar volumes of mixing of N,N-dibutyl-2-ethylhexamide with dodecanol

Excess and excess partial molar volumes of mixing of the system N,N-dibutyl-2-ethylhexylamide (DBEHA) + dodecanol (DDA) were determined at 25, 35, 45, 55 and 65°C. The excess molar volumes exhibit a maxima at each temperature at approximatelyx _DBEHA = 0.3 and a minima close tox _DBEHA = 0.9. The values of the excess volumes in general increase with the temperature. The partial excess molar volumes are calculated from the smoothed data and the results are discussed in the light of postulated amide-alcohol interactions.     

Volumetric properties of the water + ethylenediamine mixture at atmospheric pressure from 288.15 to 353.15 K

Densities of the water + ethylenediamine binary system were measured at atmospheric pressure over the whole range of compositions at temperatures from 288.15 to 353.15 K using an Anton Paar digital vibrating glass tube densimeter. Density increases with water content. The experimental excess molar volume data have been correlated with the Redlich-Kister equation, and partial molar volumes calculated at infinite dilution for each component.     

TG and DSC investigation of the dehydration of the extra large pore aluminophosphate molecular sieve VPI-5 and related materials

The dehydration of a series of VPI-5 and H3 samples, synthesized under various conditions, as well as the solid state transformation of VPI-5 to AlPO₄-8 have been investigated using combined TG-DTG-DSC and high-resolution solid state³¹P-NMR. The TG curves show a quasi-continuous release of water, the total loss being characteristic for each sample. Complete dehydration is achieved when the samples are heated from 20°C to about 150°C at various beating rates. Besides the main dehydration effect, several weak endothermic peaks are observed. These generally non-reproducible modulated peaks, recorded at high heating rates, are presumably due to the interactions of the water molecules leaving the channels of VPI-5 with the randomly positioned fragments stemming from the destruction of the water triple helix assemblage. The non-isothermal kinetic parameters of the dehydration have been evaluated from the TG and DTG curves recorded at low heating rates. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

Effect of Neck Formation on the Measurement of Dynamic Interfacial Tension in a Drop Volume Tensiometer

Dynamic interfacial tension values obtained by drop volume tensiometry will be affected under certain experimental conditions by the formation of a neck between the drop and the capillary tip. This phenomenon must be accounted for to obtain accurate values of interfacial tension. In this work, neck formation for a water–mineral oil system is studied under conditions where hydrodynamic effects can be neglected. A model originally developed for the determination of the surface tension of a suspended drop is modified for application to dynamic interfacial tensions of surfactant-containing liquids. The model relates apparent values of interfacial tension calculated from drops possessing necks to actual values. Experiments with Span 80 (sorbitan monooleate) and sodium dodecyl sulfate (SDS) surfactants in a mineral oil–water system are used to test the validity of the developed model. For the small tip diameter used, good agreement is obtained for Span 80 up to the critical micelle concentration, and for low concentrations of SDS, when the surfactant adsorption is diffusion-limited. In both cases, the neck diameter of the growing drop can be considered constant over the range of dynamic interfacial tensions tested.     

Model liquid crystalline dimers in a slit pore: Monte Carlo simulation study

ABSTRACT

In this work, we present results from (isobaric–isothermal) Monte Carlo Simulation studies of liquid crystalline dimer systems confined in a slit pore. Liquid crystalline dimer systems of various spacer numbers have been considered. Surface-induced conformational and alignment properties of these systems at different pressures under homeotropic anchoring condition have been investigated. We have used easily manageable coarse grained force fields to model both monomer–monomer and monomer–substrate interaction potentials. According to the simulated result, the anchoring of dimers to the surface and orientation of mesogenic units with respect to the surface normal seem to depend on the spacer number for messogen attractive confinement. Dimers with lower spacer number are able be adsorbed to the surface and most of their mesogens are oriented along the surface normal even at lower pressure. Those with larger spacer number are distributed throughout the volume at lower pressure. In the case of mesogen repulsive confinement, most of the dimers are adsorbed to the surface and most mesogens are randomly oriented at low pressure. As the pressure gets higher, the adsorption and orientability increase depending on the type of confinement and spacer number. As a result, clear submolecular partitioning and smectic A like structure have been identified.