Temperature effects on surface activity and application in oxidation of toluene derivatives of CTAB-SDS with KMnO4

The γ_cmc values of CTAB-SDS decrease from 63.67 mN/m at 10‡C to 36.38 mN/m at 90‡C, slightly lower than those of either CTAB or SDS. Correspondingly, the CMC of CTAB-SDS decreases almost by half. The increase of surface activity of CTAB-SDS can be attributed to the relatively weak electrostatic interaction at high temperature, which is supported by the increase of solubility of CTAB-SDS with rise in temperature. Catalytic effect on oxidation of toluene derivatives with potassium permanganate follows the order CTAB-SDS > SDS > CTAB. This is not caused by the dissociative effect of CTAB-SDS with low surface activity at low temperature, as seen from the fact that almost all oxidative products can be retrieved for different toluene derivatives and surfactants by mimicking the conditions of reaction. In the emulsifications of toluene derivatives at 90‡C, the time that turbid water layers of surfactant solutions take to become clear is the same as that of the catalytic effect on oxidation of toluene derivatives. Thus, it can be inferred that surfactants can improve the oxidation yields of toluene derivatives by increasing the contact between two reacting phases.     

Effect of maltodextrins on the surface activity of small-molecule surfactants

We report on the effect of commercially important polysaccharides (maltodextrins with variable dextrose equivalent (Paselli SA-2, MD-6 and MD-10) on the surface activity at the air–water interface of small-molecule surfactants (sms), possessing different hydrophobic–lipophilic balance ((SSL (Na⁺), the main component is a sodium salt of stearol–lactoyl lactic acid, and PGE (080), polyglycerol ester of C18 fatty acid), and widely used in food products. A marked change of the surface activity of sms was found in the presence of maltodextrins by tensiometry. The combined data of laser multiangle light scattering and mixing calorimetry have suggested that this result is governed by specific complex formation between maltodextrins and sms in aqueous medium. Measurements have been made of the molar mass, the second virial coefficient and the enthalpy of intermolecular interactions in aqueous solutions. The implication of a degree of polymerization of maltodextrins in this phenomenon was shown. The interrelation between the molecular parameters of the formed complexes and their surface activity at the air–water interface has been revealed and discussed.     

Synthesis and studies of antibacterial activity of pongaglabol

Pongaglabol [8-hydroxy-5-phenyl-furo[2,3-h]benzo(b)pyran-7-one] was synthesized and tested for antibacterial effects againstShigella dysenteriae, Salmonella typhi, Streptococcus β-haemolyticus andStaphylococcus aureus. The synthesized compounds were characterized using UV, IR and¹H NMR spectral data     

Tuning size and catalytic activity of nano-clusters of cobalt oxide

Cobalt oxides were prepared by three different methods: (1) by reacting cobalt nitrate with oxalic acid, (2) co-precipitating cobalt nitrate with sodium carbonate, and (3) using sodium dodecyl sulphate as organic surfactant. All three samples were characterized before and after calcination by solvent extraction and the resulting products examined by IR spectroscopy. In the case of method 3, the removal of surfactant was followed by TGA studies. Products from all three methods were identified by XRD. Peaks in low angle XRD indicate the porous nature of the oxides. The morphology of the pores was studied by transmission electron microscopy. Some irregular pore structures were obtained for samples from methods 1 and 2, with an average size of 4–6 nm. Only the product from method 3 using SDS as template showed ordered structure and optimum size, and Brunauer-Emmet-Teller surface areas of the as-prepared, as well as the treated samples, exhibited H3 type hysteresis. The samples from the three methods were used as catalysts in the oxidation reaction of cyclohexane under mild conditions and the catalytic efficiency of the cobalt oxide was comparable with mesoporous cobalt oxides.     

Structure–activity studies on the fungitoxicity of some triorganotin(IV) compounds

Seventeen triorganotin(IV) compounds, with the general formula R₃SnX, containing symmetrical and unsymmetrical combinations of alkyl and aryl groups on tin and with a wide variation in the non-carbon-bonded anionic (X) residues, were examined along with three formally pentacoordinated adducts of triaryltin chlorides with triphenylphosphine oxide for their antifungal activity against nine plant pathogenic and saprophytic fungi. The in vitro tests included inhibitory studies on radial growth, mycelial growth, spore germination, and germ tube elongation. A significant finding was the dependence of fungitoxicity on the nature of the X group in both the tributyltin and triaryltin series, in contrast to earlier published reports on the negligible influence of the X groups on overall toxicity relative to the R group. This suggests that the X group is significantly involved in transporting the biocide to the reactive sites, and that the X group which tends to confer increased solubility to the triorganotin compound gives rise to increased activity. In studies of R group variations, tri-iso-butyltin bromide was found to be much less fungitoxic than tri-n-butyltin compounds, a result which is reconcilable in terms of increased steric encumbrance at the tin site in the former case. The steric factor is also implicated in the reduced activities observed for tris(p-tolyl)tin and tris(p-chlorophenyl)tin compounds relative to (Ph₃SnX) towards most of the fungi screened in this study. In general, it was also noted that the triaryltins were more selective in their antifungal action than the trialkyltins, which exhibited broad spectral activity when applied at the concentration level of 10 μg cm^?3.     

STUDIES ON THE PREPARATION OF ZINC-CONTAINING ACTIVATED CARBON FIBERS AND THEIR ANTIBACTERIAL ACTIVITY

1. INTRODUCTION Microbial pollution will bring about various problems in industry and other vital fields, such as causing decomposing of materials, harming people抯 health. In order to reduce these problems, new antibacterial materials have been demanded. Recently, much attention has been paid to inorganic materials including zinc oxide [1~4]. These inorganic antibacterial materials are now substituting for organic materials to avoid releasing noxious organic molecules harmful to humans;…     

Preparation of 1,1,1,3,3-pentafluoropropane (HFC-245fa) by using a SbF5-attached catalyst

In this report, a simple process for preparing HFC-245fa through the reaction of 1,1,1,3,3-pentachloropropane (PCP) and anhydrous HF via two-step vapor-phase catalytic fluorination is described. The antimony pentafluoride catalyst was supported on inert porous materials to improve the catalytic activity. The resulting process catalyst not only exhibited high catalytic activity and excellent thermo-stability, but also improved the performance of SbF₅, in terms of hygroscopicity and corrosion.     

4-Hydroxy-2-quinolones. 122. 1-Hydroxy-3-oxo-5,6-dihydro-3H-pyrrolo[3,2,1-<Emphasis Type="Italic">ij</Emphasis>]-quinoline-2-carboxylic acid hetarylamides as potential antitubercular agents

An improved method is reported for the synthesis of a series of 1-hydroxy-3-oxo-5,6-dihydro-3H-pyrrolo[3,2,1-ij]quinoline-2-carboxylic acid hetarylamides. The antitubercular activity of all of the compounds prepared has been studied. The structure-biological activity dependence revealed is discussed. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 1023–1033, July, 2007.     

Synthese von „Dithio-Oxolinsäure“

5-Amino-benzo-1,3-dithiol, available by reduction of 5-amino-benzo-1,3-dithiol-2-thion, was elaborated into dithio-oxolinic Acid (6 a).