Characterization and oxidation behavior of NiCoCrAlY coating fabricated by electrophoretic deposition and vacuum heat treatment

Electrophoretic deposition (EPD) was showed to be a feasible and convenient method to fabricate NiCoCrAlY coatings on nickel based supperalloys. The microstructure and composition of the NiCoCrAlY coatings after vacuum heat treatment were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive X-ray analysis (EDAX). Isothermal-oxidation test was performed at 1100 °C in static air for 100 h. The results show that the major phases in electrophoretic deposited and vacuum heat treated NiCoCrAlY coating are γ-Ni and γ′-Ni₃Al phases, also there is an extremely small quantity of Al₂O₃ in the coating. Composition fluctuations occur in the coating and a certain amount of titanium diffuse from the superalloy substrate to the top of the coating during vacuum heat treatment. The oxidation test results exhibit that the oxidation kinetics of this coating has two typical stages. The protective oxide layer is mainly formed in the initial linear growth stage and then the oxide layer hinders further oxidation of the coating in the subsequent parabolic growth stage. The coating can effectively protect the superalloy substrate from oxidation. A certain amount of rutile TiO₂ is formed in the coating during oxidation and it is adverse to the oxidation resistance of the coating.     

Preparation of durable hydrophobic cellulose fabric from water glass and mixed organosilanes

Durable superhydrophobic cellulose fabric was prepared from water glass and n-octadecyltriethoxysilane (ODTES) with 3-glycidyloxypropyltrimethoxysilane (GPTMS) as crosslinker by sol-gel method. The result showed that the addition of GPTMS could result in a better fixation of silica coating from water glass on cellulose fabric. The silanization of hydrolyzed ODTES at different temperatures and times was studied and optimized. The results showed that silanization time was more important than temperature in forming durable hydrophobic surface. The durability of superhydrophobicity treatment was analyzed by XPS. As a result, the superhydrophobic cotton treated under the optimal condition still remained hydrophobic properties after 50 washing cycles.     

Preparation and thermal properties of poly[acrylonitrile-co-(β-methylhydrogen itaconate)] used as carbon fiber precursor

In order to replace terpolymer with bipolymer, a bifunctional comonomer β-methylhydrogen itaconate (MHI) containing carboxyl group and ester group was synthesized to prepare poly[acrylonitrile-co-(β-methylhydrogen itaconate)] [P(AN-co-MHI)] bipolymers used as carbon fiber precursor for improving the stabilization and spinnability at the same time. The P(AN-co-MHI) bipolymers with different monomer feed ratios were characterized by elemental analysis, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). The results show that both the polymerization conversion and molecular mass of P(AN-co-MHI) reduce with the increasing MHI amounts in the feed due to the larger molecular volume of MHI than acrylonitrile (AN). The monomer reactivity ratios were calculated by Fineman–Ross and Kelen–Tüdõs methods, the results show good agreement and MHI possesses higher reactivity than AN. Two parameters $ E_{\text{s}} = A_{{1,629\,{\text{cm}}^{ - 1} }} /A_{{2,244\,{\text{cm}}^{ - 1} }} $ and $ SI = (I_{0} - I_{\text{S}} )/I_{0} $ were defined to evaluate the extent of stabilization, and the activation energy (E _a) of the cyclization was calculated by Kissinger method and Ozawa method. The FTIR, XRD, and DSC results show that P(AN-co-MHI) bipolymers exhibit significantly improved stabilization characteristics than PAN homopolymer, such as larger extent of stabilization, lower initiation temperature, and smaller E _a of cyclization, which is attributed to the ionic initiation by MHI comonomer and it is beneficial to preparing high-performance carbon fiber.     

手性环丙烯构建策略用于对映选择性合成偕二氟亚甲基三元环化合物

作为最小的不饱和环状分子,环丙烯独特的刚性结构和多变的反应活性吸引了化学家的研究兴趣.自1922年Demjanov[1]报道了环丙烯化合物的首例合成以来,现已发展了一系列环丙烯的合成方法.手性环丙烯的合成是通过炔烃和重氮化合物的[2+1]不对称环加成反应.根据底物的不同,这些不对称环加成反应可以分为四类:(a)末端炔烃和单取代重氮化合物的反应,(b)末端炔烃和双取代重氮化合物的反应,(c)非末端炔烃和双取代重氮化合物的反应,(d)非末端炔烃和单取代重氮化合物的反应.在这四类反应中,末端炔烃和单取代重氮化合物的不对称反应相对容易进行.1992年,Doyle和Müller等[2]报道了手性铑催化剂[Rh2(5R-MEPY)4]促进的末端炔烃和重氮醋酸酯之间的不对称环丙烯基化反应(Scheme 1a).随后各种手性催化剂包括[Rh2(OAc)-(DPTI)3][3]、Ir(salen)衍生物[4]和[Co(3,5-diMes-Chen-Phyrin)][5]等被先后报道用于末端炔烃和单取代重氮化合物的不对称[2+1]环加成反应.