A posteriori error analysis of a quadratic finite volume method for nonlinear elliptic problems

In this article, we construct and analyze a residual-based a posteriori error estimator for a quadratic finite volume method (FVM) for solving nonlinear elliptic partial differential equations with homogeneous Dirichlet boundary conditions. We shall prove that the a posteriori error estimator yields the global upper and local lower bounds for the norm error of the FVM. So that the a posteriori error estimator is equivalent to the true error in a certain sense. Numerical experiments are performed to illustrate the theoretical results.     

Vertically Grown Few-Layer MoS2 Nanosheets on Hierarchical Carbon Nanocages for Pseudocapacitive Lithium Storage with Ultrahigh-Rate Capability and Long-Term Recyclability

Molybdenum disulfide (MoS₂) is an intensively studied anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity, but it is still confronted by severe challenges of unsatisfactory rate capability and cycle life. Herein, few-layer MoS₂ nanosheets, vertically grown on hierarchical carbon nanocages (hCNC) by a facile hydrothermal method, introduce pseudocapacitive lithium storage owing to the highly exposed MoS₂ basal planes, enhanced conductivity, and facilitated electrolyte access arising from good hybridization with hCNC. Thus, the optimized MoS₂/hCNC exhibits reversible capacities of 1670 mAh g⁻¹ at 0.1 A g⁻¹ after 50 cycles, 621 mAh g⁻¹ at 5.0 A g⁻¹ after 500 cycles, and 196 mAh g⁻¹ at 50 A g⁻¹ after 2500 cycles, which are among the best for MoS₂-based anode materials. The specific power and specific energy, which can reach 16.1 kW and 252.8 Wh after 3000 cycles, respectively, indicate great potential in high-power and long-life LIBs. These findings suggest a promising strategy for exploring advanced anode materials with high reversible capacity, high-rate capability, and long-term recyclability.     

X-ray diffraction and Raman spectra of merrillite at high pressures

ABSTRACT

The compressibility and effect of pressure on the vibrations of merrillite, Ca₉NaMg(PO₄)₇, were studied by using diamond anvil cell at room temperature combined with in-situ synchrotron X-ray diffraction and Raman spectroscopy up to about 18 and 15?GPa, respectively. The pressure-volume data was fitted by a third-order Birch–Murnaghan equation of state to determine the isothermal bulk modulus as K₀ ?=?87.2(32) GPa with pressure derivative K₀′?=?3.2(4). If K₀′?=?4, the isothermal bulk modulus was obtained as 81.6(10) GPa. The axial compressibility was estimated and an axial elastic anisotropy exists since a-axis is less compressible than the c-axis. The Raman frequencies of all observed modes for merrillite continuously increase with pressure, and the pressure dependences of stretching modes (v ₃ and v ₁) are larger than those of the bending modes (v ₄ and v ₂) and external modes. The isothermal mode Grüneisen parameters and intrinsic anharmonicity of merrillite were also calculated.     

Top-down synthesis of polyoxometalate-like sub-nanometer molybdenum-oxo clusters as high-performance electrocatalysts

The top-down fabrication of catalytically active molecular metal oxide anions, or polyoxometalates, is virtually unexplored, although these materials offer unique possibilities, for catalysis, energy conversion and storage. Here, we report a novel top-down route, which enables the scalable synthesis and deposition of sub-nanometer molybdenum-oxo clusters on electrically conductive mesoporous carbon. The new approach uses a unique redox-cycling process to convert crystalline Mo^IVO₂ particles into sub-nanometer molecular molybdenum-oxo clusters with a nuclearity of ∼1–20. The resulting molybdenum-oxo cluster/carbon composite shows outstanding, stable electrocatalytic performance for the oxygen reduction reaction with catalyst characteristics comparable to those of commercial Pt/C. This new material design could give access to a new class of highly reactive polyoxometalate-like metal oxo clusters as high-performance, earth abundant (electro-)catalysts.

The top-down synthesis and deposition of polyoxometalate-like clusters on porous carbon is reported together with the high electrocatalytic oxygen reduction reactivity of the composite.     

Heteroborospherene nanoclusters as high-performance nonlinear optical materials

Today, the design of new compounds with giant nonlinear optical responses is attracted to many researchers. Inspired by an interesting finding of a new class of heteroborospherenes which were formed by doping four carbon atoms in the B364- nanocluster (C4B32), we suggest the alkali metal-doped C4B32 (M@C4B32, M=Li, Na, and K) nanoclusters as high-performance nonlinear optical materials. Our results show that the alkali metal atoms have a considerable effect on the structural and electronic properties of the C4B32 nanocluster. We found that the doping alkali metal can remarkably decrease the HOMO-LUMO gap and significantly increases the first hyperpolarizability of the C4B32 nanocluster. Also, our results reveal that the first hyperpolarizability of the M@C4B32 nanoclusters can be progressively enhanced by increasing the atomic number of alkali metals. The effect of external electric fields on the nonlinear optical responses of the M@C4B32 has been systematically explored. We found that the first hyperpolarizability of the M@C4B32 compounds can be gradually increased by increasing the imposed external electric field from zero to the critical external electric field along the charge transfer direction (M→C4B32). Accordingly, this work presents an efficient strategy to improve the nonlinear optical responses of the heteroborospherenes.     

Recent Advances on the Electrochemical Difunctionalization of Alkenes/Alkynes

Electroorganic synthesis is an emerging area of high impact research in organic chemistry, which is considered as one of the green and efficient methods and attracts growing research attention. In this review, we summarized comprehensively the recent literature reports on the electrochemical oxidative difunctionalization of unsaturated C—C bonds. The reaction types described in this review included electrochemical intermolecular cyclization, electrochemical intramolecular cyclization, and electrochemical difunctionalization of alkenes/alkynes. This review focuses on the discussion of its synthetic generality for the preparation of functionalized compounds and the related electrochemical oxidative reaction mechanism.     

Predicting polycyclic aromatic hydrocarbon formation with an automatically generated mechanism for acetylene pyrolysis

Using Reaction Mechanism Generator (RMG), we have automatically constructed a detailed mechanism for acetylene pyrolysis, which predicts formation of polycyclic aromatic hydrocarbons (PAHs) up to pyrene. To improve the data available for formation pathways from naphthalene to pyrene, new high‐pressure limit reaction rate coefficients and species thermochemistry were calculated using a combination of electronic structure data from the literature and new quantum calculations. Pressure‐dependent kinetics for the CH potential energy surface calculated by Zádor et al. were incorporated to ensure accurate pathways for acetylene initiation reactions. After adding these new data into the RMG database, a pressure‐dependent mechanism was generated in a single RMG simulation which captures chemistry from C to C. In general, the RMG‐generated model accurately predicts major species profiles in comparison to plug‐flow reactor data from the literature. The primary shortcoming of the model is that formation of anthracene, phenanthrene, and pyrene are underpredicted, and PAHs beyond pyrene are not captured. Reaction path analysis was performed for the RMG model to identify key pathways. Notable conclusions include the importance of accounting for the acetone impurity in acetylene in accurately predicting formation of odd‐carbon species, the remarkably low contribution of acetylene dimerization to vinylacetylene or diacetylene, and the dominance of the hydrogen abstraction CH addition (HACA) mechanism in the formation pathways to all PAH species in the model. This work demonstrates the improved ability of RMG to model PAH formation, while highlighting the need for more kinetics data for elementary reaction pathways to larger PAHs.     

An amino trimethylene phosphonic acid-based chelated boric acid complex that works as a synergistic flame retardant for enhancing the flame retardancy of cotton fabrics

The chelating ligands of boric acid and amino trimethyl phosphonate prepared a novel flame retardant (BAP) for the cotton fabric. A stable chemical and coordination bond was formed on the surface of the cotton fibers by a simple three-curing finishing process to make the fabric exhibits excellent durable flame retardancy. Cotton fabrics' tensile strength and whiteness got substantially retained after BAP treatment. 90 g/L BAP-treated samples (3 curing times, 50 laundry cycles) showed good flame retardancy and durability, holding the largest limit oxygen index, 29.7%, and the shortest damage length, 61 mm. A condensed phase and gas phase synergistic flame retardant mechanism was concluded by thermogravimetric, cone calorimeter tests, and thermogravimetric infrared analysis.     

The invalidity of intermolecular proton transfer triggered twisted intramolecular charge transfer in excited state for 2-(4′-diethylamino-2′-hydroxyphenyl)-1H-imidazo-[4,5-b]pyridine

The excited-state dynamics of the excited-state proton transfer and intramolecular twisted charge transfer (TICT) reactions of a molecular photoswitch 2-(4′-diethylamino-2′-hydroxyphenyl)-1H-imidazo-[4,5-b]pyridine (DHP) in aprotic and alcoholic solvents have been theoretically investigated by using time-dependent density functional theory. The excited-state intramolecular proton transfer (ESIPT) reaction of DHP proceeding upon excitation in all the solvents has been confirmed, and the dual emission has been assigned to the enol and keto forms of DHP. However, for methanol and ethanol solvents within strong hydrogen-bonded capacity, the intermolecular hydrogen bonds between DHP and methanol/ethanol would promote an excited-state double proton transfer (ESDPT) along the hydrogen-bonded bridge. Importantly, the previous proposed ESDPT-triggered TICT mechanism of DHP in methanol and ethanol was not supported by our calculations. The twist motion would increase the total energy of the system for both the products of ESIPT and ESDPT. According to the calculations of the transition states, the ESDPT reaction occurs much easier in keto form generated by ESIPT. Therefore, a sequential ESIPT and ESDPT mechanism of DHP in methanol and ethanol has been reasonably proposed.     

Bonding situations in tricoordinated beryllium phenyl complexes

The bonding situation in the tricoordinated beryllium phenyl complexes [BePh₃]⁻, [(pyridine)BePh₂] and [(trimethylsilyl-N-heterocyclic imine)BePh₂] is investigated experimentally and computationally. Comparison of the NMR spectroscopic properties of these complexes and of their structural parameters, which were determined by single crystal X-ray diffraction experiments, indicates the presence of π-interactions. Topology analysis of the electron density reveals elliptical electron density distributions at the bond critical points and the double bond character of the beryllium-element bonds is verified by energy decomposition analysis with the combination of natural orbital for chemical valence. The present beryllium-element bonds are highly polarized and the ligands around the central atom have a strong influence on the degree of π-delocalization. These results are compared to related triarylboranes.