Novel bismaleimide containing cyclic phosphine oxide and an epoxy unit: Synthesis, characterization, thermal and flame properties

A new type of bismaleimide resin (EPBMI), containing epoxy unit and phosphorus in the main chain, was synthesized. The structure of the new resin was confirmed by infrared spectroscopy (IR), ¹H NMR and ¹³C NMR spectroscopies. In addition, the compositions of the new synthesized bismaleimide with two reactants, 4,4′-diaminodiphenylsulfone (DDS) and 4,4′-diaminodiphenylether (DDE), was used to compare its reactivity and thermal properties with conventional bismaleimide (EBMI). Reactivity was measured by differential scanning calorimetry. Thermogravimetric analysis revealed that the polymers, obtained through the reactions between bismaleimides and diamine agents, also demonstrated excellent thermal properties and high char yield.     

Application of ammonia intermittent temperature-programmed desorption to evaluate surface acidity of tungsten oxide supported on activated carbon

Intermittent temperature-programmed desorption of ammonia was used to study the strength and population of surface acid sites of tungsten oxide supported on activated carbon pretreated at 350 and 700 degrees C. Catalysts pretreated at 350 degrees C showed two types of surface acid sites and desorption occurred with free readsorption until a temperature of around 300 degrees C was reached. Pretreatment at 700 degrees C produced three different states of ammonia adsorbed on the catalysts and desorption occurred with free readsorption.     

Effect of ionic interactions on the oxidation of Fe(II) with H2O2 in aqueous solutions

The oxidation of Fe(II) with H₂O₂ has been measured in NaCl and NaClO₄ solutions as a function of pH, temperature T (K) and ionic strength (M, mol-L^–1). The rate constants, k (M^–1-sec^–1), d[Fe(II)]/DT=-k[Fe(II)][₂O₂]at pH=6.5 have been fitted to equations of the formlog k = log k₀+ AI ^1/2+BI+CI ^1/2/T Where log k₀=15.53-3425/T in water; A=–2.3, –1.35; B=0.334, 0.180; and C=391, 235, respectively, for NaCl (=0.09) and NaClO₄ ( =0.08). Measurements made in NaCl solutions with added anions yield rates in the order B(OH) ₄ ^– >HCO ₃ ^– >ClO ₄ ^– >Cl^–>NO ₃ ^– >SO ₄ ^2– and are attributed to the relative strength of the interactions of Fe²⁺ or FeOH⁺ with these anions. The FeB(OH) ₄ ⁺ species is more reactive while the FeCO ₃ ⁰ , FeCl⁺, FeNO ₃ ⁺ and FeSO ₄ ⁰ species are less reactive than the FeOH⁺ ion pair. The general trend is similar to our earlier studies of the oxidation of Fe(II) with O₂ except for B(OH) ₄ ^– . The effect of pH on the logk was found to be a quadratic function of the concentration of H⁺ or OH^– from pH=4 to 8. These results have been attributed to the different rate constants for Fe²⁺ (k₀) and FeOH⁺ (k₁) which are related to the measured k by, k=k_0Fe + k_1FeOH, where _i is the molar fraction of species i. The rates increase due to the greater reactivity of FeOH⁺ compared to Fe²⁺. k₀ is independent of composition and ionic strength but k₁ is a function of ionic strength and composition due to the interactions of FeOH⁺ with various anions.     

Structure and photochromism of 2-(<Emphasis Type="Italic">N</Emphasis>-acyl-<Emphasis Type="Italic">N</Emphasis>-arylaminomethylene)benzo[<Emphasis Type="Italic">b</Emphasis>]thiophen-3(2<Emphasis Type="Italic">H</Emphasis>)-ones

It was shown by electron absorption spectroscopy and X-ray diffraction analysis that steric strains in photochromic 2-(N-acyl-N-arylaminomethylene) benzo[b]thiophen-3(2H)-one molecules ortho-substituted in the N-phenyl ring increase the quantum yield of the N→O photoinduced rearrangement in accord with an increase in the steric constant of the ortho-substituent.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2151–2155, October, 2004.     

Degree of hydration in cement paste and C<Subscript>3</Subscript>A-sodium carbonate-water systems

This research provides a fundamental understanding of the early stage hydration of Portland cement paste, tricalcium aluminate (C₃A) paste at water to cement ratio of 0.5 and C₃A suspension at water to cement ratio of 5.0 modified by 2 or 4 mass% of sodium carbonate. A high conversion of unreacted clinker minerals to gel-like hydration products in the cement-Na₂CO₃ pastes takes place rapidly between 1^st to 24^th h. Contrary the Ca(OH)₂ formation within the same time interval is retarded in the excess of CO₃²⁻ ions due to intensive rise and growth of CaCO₃ crystals in hydrated cement. Later, the conversion of clinker minerals to the hydrate phase is reduced and higher contents of calcite and vaterite relative to that of Ca(OH)₂ in comparison with those found in the Portland cement paste are observed. As a consequence a decrease in strength and an increase in porosity between hardened Portland cement paste without sodium carbonate and those modified by Na₂CO₃ are observed. C₃A hydrates very quickly with sodium carbonate between 1^st and 24^th h forming hydration products rich in bound water and characterized also by complex salts of (x)C₃A·(y)CO₂·(zH₂O type, whereas C₃A-H₂O system offers C₃AH₆ as the main hydration product. Higher content of the formed calcium aluminate hydrates in C₃A-Na₂CO₃-H₂O system also contributes to early strength increase of Portland cement paste.     

Optical spectroscopy of chromium doped (CH3)2NH2X(SO4)2·6H2O (X=Al, Ga) single crystals

Chromium doped (CH₃)₂NH₂Al(SO₄)₂·6H₂O (DMAAlS) and (CH₃)₂NH₂Ga(SO₄)₂·6H₂O (DMAGaS) single crystals were grown and investigated using the methods of optical spectroscopy. It was found that the Cr³⁺ ions in the two crystals are situated in a strong crystal field in which the ²E state is the lowest. The single narrow R-line associated with the ²E–⁴A₂ phosphorescence of Cr³⁺ in DMAAlS in a ferroelectric phase indicates an undistorted octahedral site, whereas important distortion of O_h symmetry and structural disorder was inferred from spectral data obtained with DMAGaS:Cr³⁺ in a low temperature phase. Results of optical investigation are discussed taking into account the structural data.     

Effect of Electrode Pattern on the Column Structure and Yield Stress of Electrorheological Fluids

For electrorheological (ER) suspensions, the aggregate structures of particles were observed in electric fields by the use of transparent cells with different electrode patterns. Although the suspension is dispersed to noninteracting particles without electric fields, many aggregates are formed on the electrode surface in electric fields. Since the dipole–dipole interactions cause chain structures of particles and equilibrium conformations of chains are always aligned with electric field, the aggregates indicate the presence of columns spanning the electrode gap. The particle concentration in columns which are developed between parallel-plate electrodes is about 22 vol %. In striped electrodes, the particles construct striped aggregates along the electrodes and no particles remain in the insulating region. The particle concentration in striped aggregates is about 35 vol %. The nonuniformity of electric field is responsible for the high particle concentration. The increase in particle concentration of column lead to the high yield stress of electrified suspension. Therefore, the ER performance of suspension as an overall response can be improved by the electrode design.     

The dissociation quotients of formic acid in sodium chloride solutions to 200°C

The dissociation quotients of formic acid were measured potentiometrically from 25 to 200°C in NaCl solutions at ionic strengths of 0.1, 0.3 1.0, 3.0, and 5.0 mol-kg^–1. The experiments were carried out in a concentration cell with hydrogen electrodes. The resulting molal acid dissociation quotients for formic acid, as well as a set of infinite dilution literature values and a calorimetrically-determined enthalpy of reaction, were fitted by an empirical equation involving an extended Debye Hückel term and seven adjustable parameters involving functions of temperature and ionic strength. This regressional analysis yielded the following thermodynamic quantities for 25°C: logK=–3.755±0.002, H^o=–0.09±0.15 kJ-mol^–1, S^o=–72.2±0.5 J-K^–1-mol^–1, and C _p ^o =–147±4 J-K^–1-mol^–1. The isocoulombic form of the equilibrium constant is recommended for extrapolation to higher temperatures.     

Synthesis and Spectroscopic Studies of Chosen Heteropolytungstates and Their Ln(III) Complexes

The heteropolytungstates [(Na)P₅W₃₀O₁₁₀]^4– (I), [(Na)Sb₉W₂₁O₈₆]^18– (II) and [(Na)As₄W₄₀O₁₄₀]^27– (III) and the monovacant Keggin structure of the general formula [XW_11–xMo_xO₃₉]^n– (X-Si, P; n = 7 for P and 8 for Si) (IV) as well as their europium(III) complexes were studied. The structures of I–IV as well as the europium(III) encrypted [(Eu)P₅W₃₀O₁₁₀]^12– (VI), [(Eu)Sb₉W₂₁O₈₆]^16– (VII), [(Eu)As₄W₄₀O₁₄₀]^25– (VIII) and sandwiched [Eu(XW_11–xMo_xO₃₉)₂]^n– (n =11 for P and n = 13 for Si) (V) complexes were synthesized and spectroscopically characterized. The complexes were studied using UV-Vis absorption and luminescence, as well as the laser-induced europium ion luminescence spectroscopy. Absorption spectra of Nd(III) were used to characterize the complexes formed. Excitation and emission spectra of Eu(III) were obtained for solid complexes and their solutions. The relative luminescence intensities of the Eu(III) ion, expressed as the ratio of the two strongest lines at 594 nm and 615 nm, = I₆₁₅/I₅₉₄, which is sensitive to the environment of the primary coordination sphere about the Eu(III) ion, was calculated. In the case of the sandwiched [Eu(XW_11–xMo_xO₃₉)₂]^n– complexes a linear dependence of the luminescence quantum yield of Eu(III) ion, , (calculated using [Ru(bpy)₃]Cl₂ as a standard) on the content of Mo (number of atoms, x) in the [Eu(XW_11–xMo_xO₃₉)₂]^n– structure was observed.     

吴大源金缕梅种群生殖产量的相关分析

在金缕梅种群中设置调查样方,测定样方中金缕梅的树高等各营养生长指标及生殖分配指标,分析金缕梅的年龄分布为下降型种群,生殖产量与树高等营养指标之间的相关分析表明,生殖产量与冠幅的相关性显著,而与其它指标间的相关性不显著。