应变速率对8090Al-Li合金拉伸性能的影响

用动态拉伸的方法研究了应变速率对 80 90 Al— L i合金拉伸性能的影响 ,应变速率的范围为 10 - 3～ 10 3s- 1。结果表明 ,合金的强度和塑性随应变率的增加而增加。试样的 SEM和 TEM分析发现 :准静态下的断裂为沿晶断裂 ;随着应变率的增加 ,断裂从穿晶准解理断裂过渡到由显微空穴聚集而成的韧窝断裂。高应变率下80 90 Al- L i合金强度和塑性的提高与其变形机制和晶界无沉淀区 (PFZ)的变化有关     

双剪强度理论在水工压力隧洞弹塑性应力分析中的应用

水工压力隧洞的弹塑性分析,工程上一直采用Ｍｏｈｒ－Ｃｏｕｌｏｍｂ强度准则进行求解。但由于该理论和试验结果常常不符,故产生误差。本文应用俞茂宏教授提出的双剪强度理论对水工压力隧洞进行弹塑性分析,解决了上述问题。     

水泥黄土增强措施初探

在分析资料和室内试验的基础上,概括了提高水泥黄土强度有效措施,就水泥黄土硬化和外加剂对水泥黄土的作用机理进行了初步探讨。     

诱导法曲率对圆弧齿线双圆弧齿轮接触强度的影响

根据齿轮啮合原理,分析并比较了圆弧齿轮双圆弧齿轮与普通双圆弧齿轮啮合特性,通过推导这种新型齿轮齿面诱导法曲率,分析了接触强度得以提高的原因。同时用切齿法进行研究后得出,该齿轮还具有较高弯曲强度。     

利用神经网络预测混凝土的抗压强度

应用人工神经中的神经元网络理论,预测混凝土的抗压强度值,探讨出一条预测混凝土抗压强度的理论方法,其结果具有较高的精确度。     

给水度与饱和差关系的初步研究

通过对给水度与饱和差的理论分析,明确了给水度与饱和差在基本概念上的差别;得出了饱和差通常是大于给水度而小于孔隙度,以及只有岩土体积含水率达到持水度时饱和差与给水度才相等的结论;给出了饱和差与给水度之间的定量关系式。这些结果得到了室内试验的验证。     

粘胶基碳布电化学氧化表面处理的研究

本文用电化学氧化方法对粘胶基碳布进行表面处理。采用电位滴定法分析测定了氧化处理前后碳纤维表面酸性官能团含量的变化,用水滴铺展方法分析了处理前后碳布润湿性能的变化情况,探讨了酸性官能团含量、织物强力与复合材料层间剪切强度的关系,找出了以Ｈ３ＰＯ４为电解质的最佳电化学氧化表面处理工艺。     

Properties study of anhydrite(II) prepared from waste gypsums

Anhydrites(II)- CaSO₄ were prepared from two waste gypsums (PRECHEZA Perov, FOSFA Potorná). The samples of anhydrites(II) with sulphate activators were tested on spillage, beginning and the end of setting time, bending and pressure strength. Both sodium and potassium sulphates accelerated setting of anhydrite, more impressively that prepared from Potorná gypsum. The addition of Na₂SO₄ influenced the strength of this anhydrite very favourably. On the contrary K₂SO₄ influenced favourably the strength of Perov anhydrite. Results confirm the necessity to evaluate properties of such materials with respect to their origin.     

ESR investigation on the phase transitions of DPPC vesicles in presence of high concentrations of Li+, Na+, K+ and Cs+

The partition of the spin label TEMPO in the hydrophobic region of di-palmitoyl-phosphatidylcholine unilamellar vesicles has been used to investigate the influence of high concentration (up 3M) of Li⁺, Na⁺, K⁺, and Cs⁺ on the phase transitions at 20–60°C. All of the above salts increase the permeation of TEMPO. The efficiency of monovalent cations in inducing the partition of the spin label in the hydrophobic environment of the bilayer increases in the order: Cs⁺+++. The disappearing of the pretransition and the downward shift of the main phase transition temperature from 37°C to 33.5°C is related to the increased permeation of TEMPO into the bilayer. The presence of salts in the bulk solution disturbs the hydration of the zwitterionic polar head of the DPPC molecules and changes the electrical interaction between the polar groups of the bilayer. This reduces the packing density of the lipid molecules and promotes the permeation of TEMPO.     

Effects of steric and hydrophobic forces on the rheological properties of ZrO2 suspensions

 The effect of pH on the flow behavior of ZrO₂ suspensions containing polyacrylic and octanoic acids was evaluated. In the flocculated pH regime, the flow behavior is highly shearthinning and can be described by a power-law model. The shear-thinning behavior increases with increasing degree of flocculation. Maximum shearthinning was observed at the zero zeta potential condition. Hydrophobic interaction arising from adsorbed octanoic acid was found to enhance the shear-thinning behavior. No such enhancement was observed for adsorbed polyacrylic acid. It was also illustrated that the viscosity–pH behavior is a mirror image of the yield stress–pH behavior. A quantitative particle-pair interactions model incorporating steric and hydrophobic interactions was proposed to explain the effects of polyacrylic and octanoic acids on the maximum yield stress. Received: 23 May 1997 Accepted: 4 June 1997